Register your product and get support at www.philips.
1 a b
c 1 2 3 4 5 6 7 8 9 0 ! " §
a m 5m 183 mm 53.
d e f
3 4
5
3 English Install the car audio 4 These instructions are for a typical installation. However, if your car has different requirements, make the corresponding adjustment. If you have any questions regarding installation kits, consult your Philips car audio dealer. 5 Connect wires 1 8 1 2 Pull out the ISO connectors from the car dashboard and connect them to the bigger end of the supplied standard connector. a Connect the other end of supplied standard connector to the unit.
6 7 Touch / Touch to exit time setting menu. to adjust each setting. Listen to Radio 1 2 Touch Remove the USB device 1 2 Press to turn off the unit. Remove the USB device. Insert SDHC card to display main menu. Touch [Radio]. 1 2 Press 5 to open the front panel. Insert the SDHC card into the card slot. »» The unit starts playing from the SDHC card automatically. Remove the SDHC card 3 4 • Touch [FM] repeatedly at the right-lower corner to switch among the band options.
4 5 • Touch on an option to access all the calls or numbers under this option. Touch on a call. Or touch to enter number directly, then to dial. touch green Receive call By default, all incoming calls are received automatically. 1 2 If there is incoming call, [Incoming call...] flashes on the screen. Speak into the Bluetooth microphone. When conversation ends, touch to terminate the call.
© 2010 Koninklijke Philips Electronics N.V. All rights reserved. CED370_00_QSG_V1.
