Register your product and get support at www.philips.
1 Important Safety Notice 2 Your car audio system Introduction What’s in the box Overview of the main unit Overview of the remote control 4 4 4 6 6 6 7 8 6 Adjust settings 24 24 26 26 27 28 28 28 Adjust sound Adjust system settings Adjust general DVD settings Adjust video DVD settings Select language Adjust display settings View DivX registration code 7 Others 3 Get started Install the car audio Install remote control battery Turn on Select display language Set clock 4 Play Load discs Insert USB devi
1 Important Notice Safety • • • • • • • • • • • • • • 4 Read and understand all instructions before you use the apparatus. If damage is caused by failure to follow instructions, the warranty does not apply. Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. This unit is designed for negative ground (earth) 12 V DC operation only. To reduce the risk of traffic accident, do no watch video during driving.
Engl i sh Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.
2 Your car audio system What’s in the box Check and identify the contents of your package: Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.
Overview of the main unit bc d t s e f r q p o n m u g l k b / • • Tune for radio station. Skip/search for track. j ih v x a MENU • Access the system menu. Engl i sh a w c OK /MUTE • Turn the unit on or off. • Turn mute on or off. • Adjust volume. • Confirm selection. d / • • Select tuner band. Select folder.
e • • • Return to previous menu. Stop searching. Disable screen saver. f Screen g • Unlock the front panel. h USB socket t SOURCE • Select audio source. u Disc slot v • Eject disc. w SD/MMC card slot x RESET • Restore default settings. i External equipment audio-in socket j R/L , 6 • Select preset station no. 6. • Select audio channel. k 5, P/N • Select preset station no. 5 • Select video output format. l SHUF, 4 • Turn random play on or off. • Select preset station no.
b SOURCE • Select connected device. c • • Return to previous menu. Disable screen saver. d VOLUME +/• Adjust volume. e EQ • Select equalizer (EQ) setting. f DBB • Turn on or off Dynamic Bass Boost (DBB) sound. g 3, REP • Select repeat play mode. • Select preset station no. 3 h SCH • Store radio station automatically. i DISP • Display play information. j ZOOM • Enlarge or reduce picture or active image size. k ANGLE • Select a difference angle/version of the current DVD scene.
3 Get started Caution • Use the controls only as stated in this user manual. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of your apparatus. The model number and serial number are on the bottom of your apparatus. Write the numbers here: Model No. __________________________ Serial No.
3 Do the other connections, if applicable. Engl i sh Connect wires: ISO connectors Caution • Ensure that all loose leads are insulated with electrical tape. 1 Pull out the ISO connectors from the car dashboard and connect them to the bigger end of the supplied standard connector. CAMERA IN Connect wires: without ISO connectors Caution • Ensure that all loose leads are insulated with electrical tape. 2 Connect the other end of supplied standard connector to the unit.
2 Check the car’s wiring carefully, then connect them to the standard connector. 8 7 8 1 2 3 4 7 6 Connector Connect to Gray and Right speaker (Front) gray/black wires Purple and Right speaker (Rear) purple/black wires 3 Connect the supplied standard connector to the unit. 4 Do the other connections, if applicable.
Engl i sh Connect parking brake cable Connect reverse driving cable EN 13
Attach the front panel 1 4 Close the front panel. Attach the trim plate. Mount in the dashboard 2 Insert the left side of the panel in the chassis until it is correctly engaged. Note • For proper operation of the DVD player, the chassis must be mounted within 20 degree horizontal. Ensure that the unit is mounted within this limitation. 1 3 Press the right side of the panel until the mechanism locks it into place.
Ensure that car dashboard opening is within these measurements: 5 Install the sleeve into the dashboard and bend the tabs outward to fix the sleeve. • If the unit is not fixed by sleeve but by the supplied screws, skip this step. 6 Place the rubber cushion over the end of the bolt. m 5m mm 53.5mm 183 3 Remove the two transport screws on the top of the unit. 4 Remove the mounting sleeve with the removal keys.
7 Slide the unit into the dashboard until a click sound is heard. 8 Reconnect the negative terminal of the car battery. Install remote control battery Turn on 1 Press the knob to turn on the unit. » The unit plays the last listened program: DVD, Tuner, USB or SD/MMC Card (if there is USB device or SD/ MMC card connected). • To turn off the unit, press the knob for more than 2 seconds. When the unit is idle for over 3 minutes, it goes to standby mode and displays screen saver.
On the remote control, press the navigation buttons to select [SETTINGS], then press SEL to confirm. » The settiing menu is displayed. 4 Play Engl i sh 2 Ensure that the disc or device contains playable music/video. (see ‘Product information’ on page 31) Note • For CDs recorded in multiple sessions, only the first session is played. • This apparatus does not support MP3PRO audio format. 3 • If any special characters are present in the MP3 Select [Language] > [OSD lang].
You can play DVD discs with the following region codes: Tip • If the disc is blocked in the disc compartment, DVD region code Countries press and hold until the disc comes out. Asia Pacific, Taiwan, Korea Insert USB device 1 Press 2 Insert the disc into the disc slot with label side facing up. » Play resumes from the point where it was last stopped. to open the front panel. ing in China Print 3 To remove the disc, press the button.
• 1 2 • Press to turn off the unit. Remove the USB device. Insert SD/MMC card 1 2 Press to open the front panel. Insert the SD or MMC card into the card slot. » The unit starts playing from the SD/ MMC card automatically. Remove the SD/MMC card 1 2 3 Press To skip to the previous/next track, press or . To search backward/forward rapidly within the current track, press or for 3 seconds .
For audio disc play Select audio language During play, press 3, REP repeatedly to select: • [Rep 1]: play the current track repeatedly. • [Rep all]: play all tracks repeatedly. • [Rep off]: cancel repeat play. For video discs that contain two or more audio channels. 1 During play, press R/L on the remote control repeatedly until the language is selected. For MP3/WMA play During play, press 3, REP repeatedly to select: • [Rep 1] : play the current track repeatedly.
For DVDs, VCDs and picture CDs, you can zoom in and out for video images or pictures. 1 2 Press ZOOM on the remote control repeatedly to select rate. • [Zoom] is displayed. When the video image or picture is enlarged, press the navigation buttons to pan through it. 5 Listen to radio Engl i sh Zoom Tune to a radio station 1 2 3 Press SOURCE to select Tuner. Press and hold or to select band. » [FM] or [AM] is displayed. Press or to tune to a radio station manually.
Store stations manually 1 Tune to the station that you want to store . 2 Press one of the numbered buttons 1 to 6 for over 2 seconds. » The station is saved in the selected channel. 3 Tune to a preset station 1 2 Press and hold or to select band. Press / or the number button 1 to 6 to select the preset station. Select stereo/mono broadcasting For stations with weak signals: to improve the reception, change to monoaural sound. 1 Press MENU. » The main menu is displayed.
The RDS (Radio Data System) function operates only in areas with FM stations broadcasting RDS signals. If you tune to an RDS station, an RDS icon and the station name are displayed. The PTY (program type) function lets you find similar programming by genre, and the radio starts searching for stations broadcasting in the selected category. 1 Press and hold SEARCH. » The PTY menu is displayed. Activate AF/TA/REG/CT functions 1 Program type (PTY) Press and hold MENU. » The setting menu is displayed. 1.
Item Program type 6 DRAMA 6 Adjust settings 7 Adjust sound 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Description Radio plays and literature CULTURE Culture, religion and society SCIENCE Science VARIED Entertainment programs POP M Pop music ROCK M Rock music MOR M Light music LIGHT M Light classical music CLASSICS Classical music OTHER M Special music programs WEATHER Weather FINANCE Finance CHILDREN Children’s programs SOCIAL Social Affairs RELIGION Religion PHONE IN Phone I
Press or repeatedly to select the item to be adjusted: • [BAL] balance range: 10Lto 10R. (L = left speaker, R = right speaker) • [FAD]fader range: 10R to 10F. (R = rear speaker, F = front speaker) • [SUB] subwoofer : ON, OFF • [SUB VOL] subwoofer volume: 0 to 20 3 Press or to change value, then press . • You can also turn to select a value. 4 Press Engl i sh 2 2 3 to exit.
Adjust system settings 1 Press MENU. » The main menu is displayed. [Volume value] [Blackout] 0 - 47 [Off] [10s off] [20s off] 2 [Key color] [Red] Press the navigation buttons to select [SETTINGS], then press to confirm. » The settiing menu is displayed. [Blue] [Time mode] [12 hour mode] [24 hour mode] [Time adjust] 3 Press the navigation buttons to select [System], then press . [Beep] [Parking] [Volume preset] 26 EN [On] Turn on the beep sound. Each time you press a button, the unit beeps.
[6 R] [7 NC 17] [8 Adult] [Default] Restricted. Recommend parent to guide children under 17 to view. Unsuitable for children under age 17. Acceptable for adults only. Restore to default settings. 4 Press the navigation buttons to select an option, then press to confirm. 5 Press to exit. Adjust video DVD settings You can adjust color settings for video output. 1 2 3 Press MENU. Press the navigation buttons to select [Settings], then press to confirm.
Select language 1 2 3 Press MENU. Press the navigation buttons to select [SETTINGS], then press to confirm. Press the navegation buttons to select [Language] , then press . » The following options is displayed: [Brightness]: 0 to 12. [Contrast]: 0 to 12. [Saturation]: 0 to 12. ⁚㇂Ŷဟ Español Português Pyccknñ » [OSD lang] » [Audio lang] » [Subtitle lang] » [Menu lang] » [DivX [R] VOD] 4 Press the navegation buttons to select an item, then press to confirm. 5 Press to exit.
2 Open the panel, then push the right side panel toward the left side to disengage it from the chassis. 3 Take off the panel and store it in the supplied carry case to protect it from dirt or damage. Listen to other devices You can connect an external sound device to the unit. 1 Connect the external sound device to the unit by using a 3.5 mm plug. 2 Press SOURCE repeatedly until [AUX] is displayed. Reset You can reset the unit to its default setting.
Default settings Sound System settings settings Equalizer User Source Tuner, FM1, 87.5 Bass 0 Demo Off Middle 0 Blackout Off Treble 0 Key color Blue Balance 0 Clock Current time Fader 0 ESP 45S LPF 2 Local/Distance Distance MPF 2 Beep On HPF 2 Stereo/Mono Stereo V-Last/Adj V-Last Volume 20 Subwoofer OFF Subwoofer 10 volume Pin code 0000 Auto scroll On Replace fuse If there is no power, the fuse may be damaged and need to be replaced. 1 Detach the front panel and take out the unit.
Note • Product information is subject to change without prior notice. General Power supply Fuse Suitable speaker impedance Maximum power output Continuous power output Pre-Amp output voltage Aux-in level Dimensions (W x H x D) Weight 12 V DC (11 V - 16 V), negative ground 15 A 4-8 45 W x 4 channels 22 W x 4 channels (4 10% T.H.D.) 2.0 V 500 mV 188 x 58 x 194 mm 1.
• • • • • • • DRM protected WMA files (.wav, .m4a, .m4p, .mp4, .aac) WMA files in Lossless format ISO9660, Joliet Maximum title number: 512 (depending on file name length) Maximum album number: 255 Supported sampling frequencies: 32 kHz, 44.1kHz, 48 kHz Supported Bit-rates: 32~256 (kbps), variable bit rates 9 Troubleshooting Caution • Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the system yourself.
• Disc rating exceeds the restric setting. Change the rating settings to lower one (see ‘Adjust video DVD settings’ on page 27 ). Disc region code is not compatible with the unit. Use disc with proper region code. (see ‘Region code’ on page 18) Disc is blocked in the disc compartment • Press and hold until the disc comes out. No image • Parking brake wire connection is incorrect. Check the parking wiring.
© 2009 Koninklijke Philips Electronics N.V. All rights reserved. CED228_98_UM_V2.
