User manual

14 EN
Set the clock
1
Press and hold to access the system
menu.
2 Press / repeatedly until [CLK] is
displayed with time digits blinking.
3 Rotate anti-clockwise to set the hour.
4 Rotate clockwise to set the minute.
Display the clock
Press /AS.
» The set clock is displayed.
• To exit the clock display, press
/AS
again or rotate
.
Select a source
Press SOURCE repeatedly to select a source.
• [RADIO]: Listen to FM/AM radio.
• [AUDIO IN]: Listen to the audio input
through the AUDIO IN socket.
• [AV IN]: The audio and video input that is
transferred from an external video player
• [USB]: When a USB storage device is
connected and recognized, you can select
this source to play compatible les that are
stored on it.
• [DVD]/[DISC]: When a compatible disc is
inserted and recognized, you can select this
source to play the disc.
Select a listening zone
1
Press and hold until one of the
following options is displayed.
• [ALL]: For all passengers
• [FRONT-L]: For the front-left seat only
• [FRONT-R]: For the front-right seat
only
• [FRONT]: For front passengers only
2 Press / repeatedly to select a
listening zone.
Set for video playback
If video image is abnormally displayed on the
connect external screen, check the video
connection and make the following setup.
Note
•
Make sure that a compatible video disc is inserted and
the source is selected as [DVD]/[DISC].
• Make sure that the video input channel of the external
screen is set to the one for this system.
Set the color system
1 Press SETUP to access the menus for
audio and video output settings.
2 Press / to select [TV SYSTEM] (TV
system), and then press OK to display the
lower level options.
3 Press / to select an option and then
press OK.
• [NTSC]: For a screen with NTSC
color system.
• [PAL60]: For a screen with PAL60
color system.
• [PAL]: For a screen with PAL color
system.
• [AUTO] (Auto): For a screen that
is compatible with PAL, PAL60, and
NTSC.
4 Press SETUP to exit the menus.
TV S YS TE M
VIDEO
TV T YP E
PASS WORD
RATING
DEFAULT