Always there to help you Register your product and get support at www.philips.
English Contents 1 Safety 2 8 Listen to an external player 17 2 Your car audio system 3 3 3 4 9 Adjust sound 18 Introduction What's in the box Overview of the system 3 Install the car audio system Connect wires Mount into the dashboard Attach the front panel 4 Get started )RU WKH ÀUVW WLPH XVH Set the time format Set the clock Select a source Select a listening zone Mute the button beep 5 Listen to radio Select a tuner region Select a tuner sensitivity Search for a radio station Store radio sta
1 Safety Read and understand all instructions before you use this device. If damage is caused by failure to follow instructions, the warranty does not apply. 0RGLÀFDWLRQ RI WKH SURGXFW FRXOG UHVXOW in hazardous radiation of EMC or other unsafe operation. The device is designed for negative ground (earth) 12 V DC operation only. To ensure safe driving, adjust the volume to a safe and comfortable level. Improper fuses can cause damage or ÀUH :KHQ \RX QHHG WR FKDQJH WKH IXVH consult a professio
ZPD ÀOHV Versions: V4, V7, V8, V9 (L1 and L2) Sampling frequencies: 44.1 kHz, 48 kHz Bitrates: 64-192 kbps and variable bitrates ID3 tag V2.0 or later 8QVXSSRUWHG ÀOHV $$& :$9 DQG 3&0 ÀOHV '50 SURWHFWHG :0$ ÀOHV ZDY P D .m4p, .mp4, and .aac) :0$ ÀOHV LQ ORVVOHVV IRUPDW Congratulations on your purchase, and ZHOFRPH WR 3KLOLSV 7R IXOO\ EHQHÀW IURP WKH support that Philips offers, register your product at www.philips.com/welcome.
Overview of the system a bc o d e f n g a m l k q a / Tune to a radio station. Press to skip to the previous/next track. Press and hold to rewind a track or search fast forward. b Press to answer or redial a call. Press to hang up a call. Press and hold to reject an incoming call. 4 EN j i h p c Unlock the front panel. d / For .wma and .mp3 tracks on a storage device, press to select the previous folder. Press and hold to access the system menu.
k / In radio mode, press to select the preset radio station of No. 1 and 2. In radio mode, press and hold to store the current radio station at channel No. 1 and 2. For .wma and .mp3 tracks on a storage device, press to access the folder list. For .wma and .mp3 tracks on a storage device, press to access the track list. l /DISP Press repeatedly to display available information about the current track. Press repeatedly to display available RDS information.
3 Install the car audio system Connect wires Note Make sure that all loose leads are insulated with electrical tape. Consult a professional to connect wires as instructed Caution below. Use the controls only as stated in this user manual. Always follow the instructions in this chapter in sequence. 1 Check the car's wiring carefully and connect them to the the ISO male connectors. These instructions are for a typical installation.
&RQQHFW WKH DQWHQQD DQG DPSOLÀHU DV illustrated, if applicable. Mount into the dashboard i h 1 If the car does not have an on-board drive or navigation computer, disconnect the negative terminal of the car battery. If the car battery is not disconnected, to avoid short-circuit, make sure that the bare wires do not touch each other.
3 Install the sleeve into the dashboard and EHQG WKH WDEV RXWZDUG WR À[ WKH VOHHYH 3m 4 Attach the trim plate. 6 Reconnect the negative terminal of the car battery. 53.5 mm 18 5 m Slide the unit into the sleeve until you hear a "click". Attach the front panel 8 EN 1 Insert the notch on the front panel to the chassis on the main unit. 2 Press the left end of the front panel inwards until it is securely locked with a "click".
4 Get started English Detach the front panel Note Before you insert an SD/SDHC card or reset the system, detach the front panel. Before you detach the front panel, make sure that the system is turned off. 1 2 Press to release the front panel. )RU WKH ÀUVW WLPH XVH 1 Press to turn on the system. » [PHILIPS] is displayed and then [SELECT OPERATING REGION] (select a radio region) scrolls. 2 When one of the following options is displayed, rotate to select a radio region that matches your location.
2 Set the clock Press zone. / repeatedly to select a listening 1 Press and hold menu. 2 Press / repeatedly until [CLK] is displayed with time digits blinking. 3 4 Rotate anti-clockwise to set the hour. The beep sound of buttons is enabled by default. Rotate clockwise to set the minute. 1 Press and hold menu. 2 Press / repeatedly until [BEEP ON] or [BEEP OFF] is displayed. [BEEP ON]: Enable the beep sound of buttons. [BEEP OFF]: Mute the beep sound of buttons.
Search for a radio station automatically Select a tuner region You can select a radio region that matches your location. 1 In radio mode, press and hold the system menu. 2 Press / repeatedly until one of the following options is displayed.
Store radio stations manually 3 Press types. 1 Press band. 4 Rotate to select a program type, and then press WR FRQÀUP 2 Tune to the radio station that you want to store. Item Program type 3 Press and hold , , , , , or to store the radio station at the selected channel. 1 2 NEWS AFFAIRS or repeatedly to select a tuner 3 Play with RDS 4 5 The RDS (Radio Data System) function operates only in areas with FM stations broadcasting RDS signals.
Use alternate frequencies 1 2 Press and hold 3 Rotate to select a setting. [AF ON]: Enable the AF function. [AF OFF]: Disable the AF function. to access the system menu. Press / repeatedly until [AF ON] or [AF OFF] is displayed. Set the region for AF tuning You can set the region for AF tuning. 1 2 3 Press and hold to access the system menu. Press / repeatedly until [REG ON] or [REG OFF] is displayed. Rotate to select a setting.
6 Play from a storage device Control play Button / 7KLV V\VWHP FDQ SOD\ PS DQG ZPD ÀOHV WKDW are copied onto a compatible storage device. / / Note /DISP WOOX Innovations does not guarantee compatibility with all storage devices. 17)6 1HZ 7HFKQRORJ\ )LOH 6\VWHP ÀOH V\VWHP LV QRW supported. Function Press repeatedly to select a folder. Pause or resume play. Press to play the previous or next track. Press and hold to rewind a track or search forward fast.
1 Press to access the folder list. » [ROOT] scrolls. 2 Rotate to toggle through folders. » The name of current folder scrolls. 3 4 5 Press Rotate folder. Press to select the folder. to toggle through tracks in the to play the selected track. 7 Use Bluetooth devices English Switch folders for a track With this car audio system, you can listen to audio from a player or make a call through Bluetooth.
Disconnect a device 1 Press and hold menu. 2 Press / repeatedly until [DISCONNECT] is displayed. 3 Press . » [DISCONNECT] scrolls. to access the system Tip You can also complete the disconnection on your device. Reconnect a device Some Bluetooth devices support the automatic reconnection with a paired Bluetooth device. If your device does not support automatic reconnection, reconnect it with this system manually. 1 Press and hold menu. 2 Press repeatedly until [DISCONNECT] is displayed.
1 Press . » [REDIAL] is displayed. 2 Press WR FRQÀUP » [CALLING] is displayed. Pick up an incoming call 8 Listen to an external player English Redial the last called number You can use the system to amplify the audio input from an external player, for example, MP3 player. When the system receives an incoming call, the phone number or [PHONE IN] is displayed. Press to answer the call. AUDIO IN Reject an incoming call Press and hold until [END] is displayed.
9 Adjust sound The following operations are applicable to all supported media. Button Function Rotate to increase or decrease the volume level. Press to mute the speakers or release them from mute status. Press to enable or disable the maximum volume. Press and hold to enable or disable the Dynamic Bass Boost (DBB) effect. Press repeatedly to select a sound equalizer. 1 Press and hold to activate the setup of customized sound equalizer.
Launch the AppsControl app and it will automatically connect with the car audio system. » When connection is successful, [Connected Ok] is displayed. Use the AppsControl application English 5 Note To enjoy the latest features, update the application on your phone when an update message prompts. After update, the interface and features may be different from the description in this section. Follow the actual operations. 1 6 Launch the AppsControl application. » The home screen is displayed.
(External audio input): Switch the source to the AUDIO IN. (USB): Switch the source to USB storage device. (SD card):Switch the source to SDHC card. (Bluetooth): Enable/Disable the Bluetooth function on your smartphone (For Android only). (Voice): Voice control (For Android only). (settings): Change settings : Return to the main interface : Add a shortcut of an application onto the current interface.
Replace the fuse You can charge your USB device, for example, smart phone, with this product. If there is no power, check the fuse and replace it if it is damaged. Note 1 2 Check the electric connection. 3 Insert a new fuse with the same VSHFLÀFDWLRQV $ The output voltage through the USB socket is 5 V with output currency 1.0 A. Remove the damaged fuse from the rear panel. Connect your USB device to this product with USB cable.
12 Product information 6SHFLÀFDWLRQV DUH VXEMHFW WR FKDQJH ZLWKRXW SULRU notice. General Fuse Suitable speaker impedance Maximum power output Continuous power output Pre-Amp output voltage Aux-in level Dimensions (W x H x D) Weight 12 V DC (11 V - 16 V), negative ground 15 A 4-8 Usable sensitivity FM (S/N = 20 dB) Frequency range AM(MW) Usable sensitivity AM(MW) (S/N = 20 dB) To keep the warranty valid, never try to repair the product yourself.
About the Bluetooth device Music playback is unavailable on the system even after successful Bluetooth connection. The device cannot be used with the system to play music. The audio quality is poor after connection with a Bluetooth-enabled device. The Bluetooth reception is poor. Move the device closer to the system or remove any obstacle between the device and the system. Cannot connect with the system. 7KH GHYLFH GRHV QRW VXSSRUW WKH SURÀOHV required for the system.
Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health. Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.
Specifications are subject to change without notice 2014 © WOOX Innovations Limited. All rights reserved. Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used by WOOX Innovations Limited under license from Koninklijke Philips N.V. CE162_12_UM_V2.
