Always there to help you Register your product and get support at www.philips.
Contents 1 Safety 2 Your car audio system Introduction What's in the box Overview of the system 3 4 8 Use Bluetooth devices 20 Connect a device Play audio from a Bluetooth device Make a call 20 21 21 4 4 5 9 Listen to an external player 22 3 Install the car audio system 8 10 Adjust sound 23 Connect wires Mount into the dashboard Attach the front panel 8 9 10 11 Additional information 24 4 Get started Set the time format Set the clock Select a source Select a listening z
1 Safety Read and understand all instructions before you use this device. If damage is caused by failure to follow instructions, the warranty does not apply. in hazardous radiation of EMC or other unsafe operation. The device is designed for negative ground (earth) 12 V DC operation only. To ensure safe driving, adjust the volume to a safe and comfortable level. Improper fuses can cause damage or consult a professional.
ID3 tag V2.0 or later ??@ ?J $@ KQ ? # X .m4p, .mp4, and .aac) ? 2 Your car audio system Congratulations on your purchase, and # $ % & ! support that Philips offers, register your product at www.philips.com/welcome.
Overview of the system a b t srq c p o d n m l k j ih g u a f v d LCD screen Unlock the front panel. b For .wma and .mp3 tracks on a storage device, press to select the previous folder. Press and hold to access the system menu. Press to select a tuner band. c Return to the previous menu. For iPod/iPhone, press repeatedly to select a control mode: control play on the iPod/iPhone or on this system. During a call, press and hold to transfer the phone call to mobile phone.
For .wma and .mp3 tracks on a storage device, press to access the track list. Press to access the music menu of an iPod/iPhone. In radio mode, press and hold to store the current radio station at channel No. 6. h In radio mode, press to select the preset radio station of No. 5. In radio mode, press and hold to store the current radio station at channel No. 5. m In radio mode, press to select the preset radio station of No. 4.
s Press to enable or disable the maximum volume. Press and hold to enable or disable the DBB (dynamic bass boost) sound effect. t Press to answer or redial a call. Press to hang up a call. Press and hold to reject an incoming call. u Slot for SD/SDHC card Insert an SD/SDHC card. v RESET Press to reboot the system.
3 Install the car audio system Caution Use the controls only as stated in this user manual. Always follow the instructions in this chapter in sequence. These instructions are for a typical installation. However, if your car has different requirements, make the adjustment accordingly. If you have any question regarding installation kits, consult your local retailer. Connect wires Note The ISO male connectors are not supplied. Make sure that all loose leads are insulated with electrical tape.
2 @ illustrated, if applicable. 1 Make sure that the car dashboard opening is within these measurements: m L 5m REAR R mm 53mm 183 d 1 2 3 4 c b a Sockets on rear panel External sockets or connectors For ISO male connectors REAR L REAR R ANTENNA As indicated above 2 Remove the mounting sleeve with the supplied disassembly tools.
4 Slide the unit into the sleeve until you hear a "click". 2 5 Press the left end of the front panel inwards until it is securely locked with a "click". Attach the trim plate. Detach the front panel Note Before you insert an SD/SDHC card or reset the system, detach the front panel. Before you detach the front panel, make sure that the system is turned off. 6 Reconnect the negative terminal of the car battery. 1 2 Press to release the front panel. Pull the front panel outwards to remove it.
4 Get started 1 2 3 Press to turn on the system. » [PHILIPS] is displayed and then [SELECT OPERATING REGION] (select a radio region) scrolls. When one of the following options is displayed, rotate to select a radio region that matches your location.
Select a listening zone 1 Press and hold until one of the following options is displayed. [ALL]: For all passengers [FRONT-L]: For the front-left seat only [FRONT-R]: For the front-right seat only [FRONT]: For front passengers only 2 Press / repeatedly to select a listening zone. Mute the button beep The beep sound of buttons is enabled by default. 1 Press and hold menu. 2 Press / repeatedly until [BEEP ON] or [BEEP OFF] is displayed. [BEEP ON]: Enable the beep sound of buttons.
5 Listen to radio Search for a radio station automatically Select a tuner region You can select a radio region that matches your location. 1 In radio mode, press and hold the system menu. 2 Press / repeatedly until one of the following options is displayed.
3 Press and hold , , , , , or to store the radio station at the selected channel. To select a stored radio station, press , , , , , or . Item Program type 1 2 NEWS AFFAIRS 3 Play with RDS The RDS (Radio Data System) function operates only in areas with FM stations broadcasting RDS signals. If you tune to an RDS station, the station name is displayed. Enable the RDS function Note The RDS function is enabled by default.
Use alternate frequencies If the signal of an RDS station is poor, enable the AF (Alternate Frequency) function to search for another station that broadcasts the same program. 1 Press and hold menu. 2 Press / repeatedly until [AF ON] or [AF OFF] is displayed. 3 Rotate to select a setting. [AF ON]: Enable the AF function. [AF OFF]: Disable the AF function. to access the system Set the region for AF tuning You can set the region for AF tuning. 1 Press and hold menu.
6 Play from a storage device 2 Switch the source to [iPod/USB] or [SD/SDHC]. When a USB storage device is connected and recognized, the system switches the source to [iPod/USB] automatically. & < # are copied onto a compatible storage device. 3 If the play does not start, press Note . Control play WOOX Innovations does not guarantee compatibility with all storage devices. `& { ` # & { ] supported.
Switch tracks directly 1 Press to access the track list. » & + 2 3 Rotate Press to toggle through tracks. to play the selected track. Switch folders for a track 1 Press to access the folder list. » The name of current folder scrolls. 2 3 Rotate 17 EN to toggle through folders. Press to select the folder. » & + under the folder.
7 Play from an iPod/iPhone Note During play, no audio signals are transferred through Note Before you disconnect the iPod/iPhone, switch the system to another source. Control play Button the headphone socket of your iPod/iPhone. Function Press repeatedly to select a control mode: control play on your iPod/ iPhone, or on the system. Press to pause or resume play. Compatible iPod/iPhone models / Press to play the previous or next track. / Press and hold to rewind a track or search forward fast.
Charge your iPod/iPhone Once the iPod/iPhone is connected and recognized, the charging starts.
8 Use Bluetooth devices With this car audio system, you can listen to audio from a player or make a call through Bluetooth. Disconnect a device 1 Press and hold menu. 2 Press / repeatedly until [DIS--CON] is displayed. 3 Press . » [WAIT] is displayed with -, --, and --- blinking alternately until [DISCONNECTED] scrolls. to access the system Connect a device Tip You can also complete the disconnection on your Note device.
Play audio from a Bluetooth device Redial the last called number 1 Press . » [REDIAL] is displayed. If the connected Bluetooth device supports ? ? K ! $ ?}K$] you can listen to tracks that are stored on the device through the system. If the device also ? J Q @ $ ?JQ@$] system or with its remote control. 2 Press » [CALLING] is displayed. 1 2 Play a track on the connected device.
9 Listen to an external player You can use the system to amplify the audio input from an external player, for example, MP3 player. MP3-LINK 1 2 Switch the source to [MP3--LINK]. 3 Play the external player. Connect an MP3 link cable to the MP3-LINK socket on the system, and the audio output socket (usually the headphone socket) on the external player.
10 Adjust sound The following operations are applicable to all supported media. Button Function Rotate to increase or decrease the volume level. Press to mute or restore sound. Press to enable or disable the maximum volume. Press and hold to enable or disable the Dynamic Bass Boost (DBB) effect. Press repeatedly to select a sound equalizer. 1 Press and hold to activate the setup of customized sound equalizer.
11 Additional information L REAR R Reset the system If the system works abnormally, reset the system to factory default settings. Note If the fuse gets damaged immediately after it is replaced, an internal malfunction may occur. In such case, consult your retailer. 1 2 Detach the front panel. Press the RESET button with the tip of a ball-point pen or toothpick. » All settings are reset to factory default. Replace the fuse If there is no power, check the fuse and replace it if it is damaged.
12 Product information Note notice. General Power supply Fuse Suitable speaker impedance Maximum power output Continuous power output Pre-Amp output voltage Aux-in level Dimensions - Main unit (W x H x D) Weight - Main unit 12 V DC (11 V - 16 V), negative ground 15 A 4-8 50 W x 4 channels 22 W x 4 RMS (4 10% T.H.D.) 2.0 V 500 mV 188 X 58 X 110 mm 0.
13 Troubleshooting Warning Never remove the casing of this product. To keep the warranty valid, never try to repair the product yourself. If you encounter problems when using this product, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www.philips.com/support). When you contact the Consumer Care, make sure that the product is nearby and the model number and serial number are available.
The paired mobile phone connects and disconnects constantly. The Bluetooth reception is poor. Move the mobile phone closer to the system or remove any obstacle between the mobile phone and the system. Some mobile phones may connect and disconnect constantly when you make or end calls. This does not indicate any malfunction of the system. For some mobile phones, the Bluetooth connection may be deactivated automatically as a power-saving feature. This does not indicate any malfunction of the system.
14 Notice ? device that are not expressly approved by WOOX Innovations may void the user’s authority to operate the equipment. Compliance 1177 This product complies with the radio interference requirements of the European Community. Hereby, WOOX Innovations declares that this product is in compliance with the essential requirements and other relevant provisions K ;;;-~-@ Declaration of Conformity on www.philips.com/ support.
the use of this accessory with iPod or iPhone may affect wireless performance. iPod and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. Other trademarks and trade names are those of their respective owners. Copyright 2013 © WOOX Innovations Limited. All rights reserved. Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used by WOOX Innovations Limited under license from Koninklijke Philips N.V.
15 Glossary M MP3 ? # system. MP3 is the abbreviation of Motion Picture Experts Group 1 (or MPEG-1) Audio Layer 3. S SD Secure Digital. A type of memory card with a SDHC Secure Digital High Capacity (SDHC) is a type ! {K? } & {K? } ! SD cards to reach higher capacities from 4GB to 32GB, and growing.
2013 © WOOX Innovations Limited. All rights reserved. Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used by WOOX Innovations Limited under license from Koninklijke Philips N.V. CE152_12_UM_V4.
