Always there to help you Register your product and get support at www.philips.
Contents 1 Safety 2 7 Play from a storage device 2 Your car audio system 3 3 3 4 17 18 18 8 Play from an iPod/iPhone 19 19 19 19 20 9 Listen to an external player 20 10 Adjust sound 21 11 Additional information 21 21 21 22 12 Product information 23 13 Troubleshooting 24 14 Notice 25 25 25 25 Introduction What's in the box Overview of the system 3 Install the car audio system Connect wires Mount into the dashboard Attach the front panel 4 Get started For the first time use Set the time
1 Safety Read and understand all instructions before you use this device. If damage is caused by failure to follow instructions, the warranty does not apply. • Modification of the product could result in hazardous radiation of EMC or other unsafe operation. • The device is designed for negative ground (earth) 12 V DC operation only. • To ensure safe driving, adjust the volume to a safe and comfortable level. • Improper fuses can cause damage or fire. When you need to change the fuse, consult a professional.
2 Your car audio system • • • Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Introduction With this system, you can: • enjoy audio from a USB storage device, SD/SDHC card, iPod/iPhone, and external player, • charge your iPod/iPhone, and • listen to radio stations.
Overview of the system a b t srq c p o d n m l k j ih g u a b Unlock the front panel. • For .wma and .mp3 tracks, press to select the previous folder. In DAB mode, press to access the DAB menu. Press and hold to access the system menu. Press to select a tuner band. • • • 4 EN f v c • e • • Return to the previous menu. For iPod/iPhone, press repeatedly to select a control mode: control play on the iPod/iPhone or on this system. d LCD screen e • • Connect to a USB storage device.
f AUDIO-IN • Connect to the audio output socket (usually the headphone socket) of an external device. g • • • h • • i • • • j • • • k • Start, pause, or resume the play of tracks. In FM/MW radio mode, press to select the preset radio station of No. 6. In FM/MW radio mode, press and hold to store the current radio station at channel No. 6. In FM/MW radio mode, press to select the preset radio station of No. 5. In FM/MW radio mode, press and hold to store the current radio station at channel No. 5.
q • • • • r • • • s • • For .wma and .mp3 tracks on a storage device, press to select the next folder. In DAB mode, press and hold to access the list of radio stations. In a mode other than DAB mode, press and hold to activate the selection of listening zones. Press to select a tuner band. / Tune to a radio station. Press to skip to the previous/next track. Press and hold to rewind a track or search fast forward. Press to enable or disable the MAX Sound feature.
2 Connect wires Connect other wires if necessary. a Note b • Make sure that all loose leads are insulated with electrical tape. • Consult a professional to connect wires as instructed below. 1 Check the car's wiring carefully and connect them to the the supplied ISO male connectors.
Connect the DAB radio receiver 3 Secure the DAB radio receiver to your car. Note • The DAB radio receiver and DAB radio antenna are not bundled. Consult your local retailer for purchase. • Make sure that no lead other than the DAB radio • • • • • antenna contacts the antenna connector of the DAB radio receiver. Risk of injury: Never install the DAB radio receiver and its accessories on the airbag cover. Risk of overheating: Do not fix the DAB radio receiver to the metal surface of the main unit.
2 3 Remove the mounting sleeve with the supplied disassembly tools. Install the sleeve into the dashboard and bend the tabs outward to fix the sleeve. 5 6 Attach the trim plate. Reconnect the negative terminal of the car battery. Attach the front panel 3m 53.5 mm 18 4 1 m Insert the notch on the front panel to the chassis on the main unit. Slide the unit into the sleeve until you hear a "click". 2 Press the left end of the front panel inwards until it is securely locked with a "click".
Detach the front panel 4 Get started Note • Before you insert an SD/SDHC card or reset the system, detach the front panel. • Before you detach the front panel, make sure that the system is turned off. 1 2 Press to release the front panel. For the first time use 1 Pull the front panel outwards to remove it. 2 3 Press to turn on the system. » [PHILIPS] is displayed and then [SELECT OPERATING REGION] (select a radio region) scrolls.
Set the clock 1 2 3 4 Press and hold menu. Select a listening zone to access the system 1 Press / repeatedly until [CLOCK] is displayed with time digits blinking. Rotate anti-clockwise to set the hour. Rotate clockwise to set the minute. Tip 2 Press and hold until one of the following options is displayed.
5 Listen to FM/ MW radio stations Switch to FM/MW radio mode 1 2 Press / repeatedly to select a band: FM1, FM2, FM3, MW1, or MW2. You can select a radio region that matches your location. 2 3 To search for radio stations with strong signals only or more radio stations, you can change the tuner sensitivity. 1 2 3 Press AS/SOURCE repeatedly to switch the source to [RADIO]. Select a tuner region 1 Select a tuner sensitivity Press and hold menu.
Store radio stations automatically 1 2 Press or repeatedly to select a band. Press and hold AS/SOURCE until [STORE---] is displayed. » After the search is complete, the first stored radio station is broadcast automatically. • To select a stored radio station, press , , , , , or . Store radio stations manually 1 2 3 Press BAND, , or select a tuner band. repeatedly to Tune to the radio station that you want to store. Press and hold , , , , , or to store the radio station at the selected channel.
Item Program type Description 18 19 20 21 22 23 24 25 26 27 28 29 30 31 CHILDREN SOCIAL RELIGION PHONE IN TRAVEL LEISURE JAZZ COUNTRY NATION M OLDIES FOLK M DOCUMENT TEST ALARM Children’s programs Social Affairs Religion Phone In Travel Leisure Jazz Music Country Music National Music Oldies Music Folk Music Documentary Alarm Test Alarm Receive traffic announcement If you want to receive traffic announcement, enable the TA (Traffic Announcement) function.
6 Listen to DAB radio stations Note Tune to a detected station 1 2 3 • Make sure that the DAB radio receiver is securely connected. • For optimal reception, securely connect a DAB radio • antenna to the DAB radio receiver and extend it. Check with local retailer or go to www.WorldDAB.org for applicable DAB radio frequencies in your area. Switch to DAB mode 1 2 Press AS/SOURCE repeatedly to switch the source to [DAB/DAB+]. Press / repeatedly to select a band: DAB1, DAB2, or DAB3.
• To tune to a programmed radio station, press its corresponding numeric button , , , , , or . Program stations manually 1 2 3 4 Tune to the target detected station (see ‘Tune to a detected station’ on page 15). Press / repeatedly to select a band. Press and hold a numeric button , , , , , or to assign a sequence number to the station. » [SAVED] is displayed.
3 Rotate to select an option, and then press to confirm. • [ANTENNA OFF]: Disable the DAB reception. • [ANTENNA 12V]: Enable the DAB reception. Reset the DAB tuner 1 2 Press and hold to access the system menu. » [DAB SCAN] is displayed. 7 Play from a storage device This system can play .mp3 and .wma files that are copied onto a compatible storage device. Note • Philips does not guarantee compatibility with all storage devices. • NTFS (New Technology File System) file system is not supported.
2 3 Press AS/SOURCE repeatedly to switch the source. • [FRONT USB]: For a USB storage device that is connected to the USB socket on the front panel • [REAR USB]: For a USB storage device that is connected to the USB connector on the rear panel • [SD/SDHC]: For an SD/SDHC card that is inserted into the slot If the play does not start, press . Control play Button Press repeatedly to select a folder. Pause or resume play. / / / /DISP 18 Function EN Press to play the previous or next track.
8 Play from an iPod/iPhone 2 Press AS/SOURCE repeatedly to switch the source to [FRONT USB] (Front USB socket) or [REAR USB] (Rear USB connector). » The system starts playing tracks that are stored on your iPod/iPhone. Note • During play, no audio signals are transferred through the headphone socket of your iPod/iPhone. Compatible iPod/iPhone models This car audio system supports the following iPod and iPhone models.
Search for a track After accessing the iPod/iPhone menu, you can select a specific track quickly. 1 2 3 4 5 Press to access the iPod/iPhone menu. » [PLAYLIST] scrolls. Rotate to select a category. Press to access the list of tracks under the category. » The file name of the first track scrolls. 9 Listen to an external player You can use the system to amplify the audio input from an external player, for example, MP3 player. Rotate to select a track. » The file name of current track scrolls.
10 Adjust sound The following operations are applicable to all supported media. Button Function Rotate to increase or decrease the volume level. Press to mute the speakers or release the speakers from mute status. Press to enable or disable the MAX Sound feature. Press and hold to enable or disable the Dynamic Bass Boost (DBB) effect. Press repeatedly to select a sound equalizer. 1 Press and hold to activate the setup of customized sound equalizer.
» With the registration, you can get information about software update and product support at this Web page or via your mailbox that is registered as the account for Club Philips. Perform the upgrade 1 Note • If the fuse gets damaged immediately after it is replaced, an internal malfunction may occur. In such case, consult your Philips retailer. Upgrade the firmware 2 3 4 5 Note • Power supply must not be interrupted during the upgrade.
12 Product information Note • Specifications are subject to change without prior Usable sensitivity AM(MW) (S/N = 20 dBA) Frequency range DAB Usable sensitivity DAB (EN50248) 30 µV 174.928 - 239.200 MHz < -95 dbm notice. General Power supply Fuse Suitable speaker impedance Maximum power output Continuous power output Pre-Amp output voltage Aux-in level Dimensions (W X H X D) Weight (main unit) 12 V DC (11 V - 16 V), negative ground 15 A 4-8 50 W x 4 channels 22 W x 4 RMS (4 10% T.H.D.) 2.
13 Troubleshooting Warning • Never remove the casing of this product. To keep the warranty valid, never try to repair the product yourself. If you encounter problems when using this product, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www. philips.com/support). When you contact Philips, make sure that the product is nearby and the model number and serial number are available.
14 Notice Any changes or modifications made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment. Care of the environment Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/ EC.
Specifications are subject to change without notice © 2013 Koninklijke Philips Electronics N.V. All rights reserved. CE139DR_05_UM_V1.
