Always there to help you Register your product and get support at www.philips.
Contents 1 Safety 2 9 Adjust sound 21 2 Your car audio system 3 3 3 4 10 Additional information 22 22 22 Introduction What's in the box Overview of the system 3 Install the car audio system Connect wires Mount into the dashboard Attach the front panel 4 Get started !"#$%&'$(#)%$%*+'$,)'$ Set the time format Set the clock Select a source Select a listening zone Mute the button beep 5 Listen to radio Select a tuner region Select a tuner sensitivity Search for a radio station Store radio stations in
1 Safety Read and understand all instructions before you use this device. If damage is caused by failure to follow instructions, the warranty does not apply. .$ /"0*(12%*"3$"4$%&'$5#"0,1%$1",60$#'),6%$ in hazardous radiation of EMC or other unsafe operation. .$ The device is designed for negative ground (earth) 12 V DC operation only. .$ To ensure safe driving, adjust the volume to a safe and comfortable level. .
2 Your car audio system Bitrates: 64-192 kbps and variable bitrates .$ ID3 tag V2.0 or later .$ !"#$%%&'()*+,-)#. KKL;$8KM;$230$BL/$(6') NO/$5#"%'1%'0$8/K$(6')$=7A2<;$7+P2;$ .m4p, .mp4, and .aac) 8/K$(6')$*3$6"))6'))$4"#+2% Congratulations on your purchase, and A'61"+'$%"$B&*6*5)C$D"$4,669$?'3'(%$4#"+$%&'$ support that Philips offers, register your product at www.philips.com/welcome. What's in the box Introduction With this system, you can: .
Overview of the system a b t srq c p o d n m e l k j ih g u v d LCD screen a .$ Unlock the front panel. e b .$ For .wma and .mp3 tracks, press to select the previous folder. .$ Press and hold to access the system menu. .$ Press to select a tuner band. c .$ Return to the previous menu. .$ For iPod/iPhone, press repeatedly to select a control mode: control play on the iPod/iPhone or on this system. 4 f EN .$ Connect to a USB storage device. .$ Connect to a compatible iPod/iPhone.
.$ For .wma and .mp3 tracks on a storage device, press to access the track list. .$ Press to access the music menu of an iPod/iPhone. .$ In radio mode, press and hold to store the current radio station at channel No. 6. h .$ In radio mode, press to select the preset radio station of No. 5. .$ In radio mode, press and hold to store the current radio station at channel No. 5. m .$ In radio mode, press to select the preset radio station of No. 4. .
s .$ Press to enable or disable the maximum volume. .$ Press and hold to enable or disable the DBB (dynamic bass boost) sound effect. t BAND .$ Press repeatedly to select a tuner band. u Slot for SD/SDHC card .$ Insert an SD/SDHC card. v RESET .$ Press to reboot the system.
3 Install the car audio system Connect wires Note . The ISO male connectors are not supplied. . Make sure that all loose leads are insulated with Caution electrical tape. . Consult a professional to connect wires as instructed . Use the controls only as stated in this user manual. Always follow the instructions in this chapter in sequence. These instructions are for a typical installation. However, if your car has different requirements, make the adjustment accordingly.
i 2 ISO male connectors Connect to Yellow strip To the +12V car battery which is energized at all times Mount into the dashboard L"33'1%$%&'$23%'332$230$2+56*('#$2)$ illustrated, if applicable. .$ .$ 1 If the car does not have an on-board drive or navigation computer, disconnect the negative terminal of the car battery. If the car battery is not disconnected, to avoid short-circuit, make sure that the bare wires do not touch each other.
3 Install the sleeve into the dashboard and ?'30$%&'$%2?)$",%A2#0$%"$(E$%&'$)6''<'7 Attach the trim plate. 6 Reconnect the negative terminal of the car battery. 53.5 mm 5 18 3m m 4 Slide the unit into the sleeve until you hear a "click". Attach the front panel 1 Insert the notch on the front panel to the chassis on the main unit. 2 Press the left end of the front panel inwards until it is securely locked with a "click".
Detach the front panel Note . Before you insert an SD/SDHC card or reset the system, detach the front panel. . Before you detach the front panel, make sure that the system is turned off. 1 2 Press 10 EN to release the front panel. Pull the front panel outwards to remove it.
4 Get started Set the clock 1 Press and hold to access the system menu. /&'+(0)+,'#(+(12)+$#) 1 2 3 Press to turn on the system. » [PHILIPS] is displayed and then [SELECT OPERATING REGION] (select a radio region) scrolls. When one of the following options is displayed, rotate to select a radio region that matches your location. .$ [AREA EUROPE] (Western Europe) .$ [AREA ASIA]$=K)*2$B21*(1R .$ [AREA MID--EAST] (Middle East) .$ [AREA AUST] (Australia) .$ [AREA RUSSIA] (Russia) .
Mute the button beep The beep sound of buttons is enabled by default. 1 Press and hold menu. 2 Press / repeatedly until [BEEP ON] or [BEEP OFF] is displayed. .$ [BEEP ON]: Enable the beep sound of buttons. .$ [BEEP OFF]: Mute the beep sound of buttons. 3 Rotate 12 EN to access the system to change the setting.
5 Listen to radio Search for a radio station automatically Select a tuner region You can select a radio region that matches your location. 1 In radio mode, press and hold the system menu. 2 / repeatedly until one of the Press following options is displayed. .$ [AREA EUROPE] (Western Europe) .$ [AREA ASIA]$=K)*2$B21*(1R .$ [AREA MID--EAST] (Middle East) .$ [AREA AUST] (Australia) .$ [AREA RUSSIA] (Russia) .$ [AREA USA] (United States) .$ [AREA LATIN] (Latin America) .
Store radio stations manually 2 Press / displayed. 1 Press BAND, , or select a tuner band. 3 Press types. 2 Tune to the radio station that you want to store. 4 Rotate to select a program type, and then press $%"$1"3(#+7 3 , , , , Press and hold , or to store the radio station at the selected channel. .$ To select a stored radio station, press , , , , , or .
Item Program type Description 30 31 TEST ALARM Alarm Test Alarm mode and begins to broadcast the %#24(1$233",31'+'3%7$8&'3$%&'$%#24(1$ announcement is over, the system returns to the previous mode. .$ [TA OFF]H$D#24(1$233",31'+'3%$0"')$ not cut in. Use alternate frequencies If the signal of an RDS station is poor, enable the AF (Alternate Frequency) function to search for another station that broadcasts the same program. Tip .
6 Play from a storage device Control play Button Function Press repeatedly to select a folder. Pause or resume play. / / / /DISP 1 Connect a compatible USB storage device or SD/SDHC card. .$ For an SD/SDHC card, detach the 4#"3%$523'6$(#)%;$*3)'#%$%&'$12#0$*3%"$ the card slot, and then attach the front panel. 2 Switch the source to [iPod/USB] or [SD/SDHC]. .$ When a USB storage device is connected and recognized, the system switches the source to [iPod/USB] automatically.
Switch tracks During play, you can switch tracks or folders quickly. Switch tracks directly 1 2 3 Press to access the track list. » D&'$(6'$32+'$"4$1,##'3%$%#21F$)1#"66)7 Rotate Press to toggle through tracks. to play the selected track. Switch folders for a track 1 Press to access the folder list. » The name of current folder scrolls. 2 3 Rotate to toggle through folders. Press to select the folder. » D&'$)9)%'+$)%2#%)$5629*3:$%&'$(#)%$%#21F$ under the folder.
7 Play from an iPod/iPhone Note Note . Before you disconnect the iPod/iPhone, switch the system to another source. Control play . During play, no audio signals are transferred through the headphone socket of your iPod/iPhone. Button Function Press repeatedly to select a control mode: control play on your iPod/ iPhone, or on the system. Press to pause or resume play. Compatible iPod/iPhone models This car audio system supports the following iPod and iPhone models. .
3 Press to access the list of tracks under the category. » D&'$(6'$32+'$"4$%&'$(#)%$%#21F$)1#"66)7 4 to select a track. Rotate » D&'$(6'$32+'$"4$1,##'3%$%#21F$)1#"66)7 5 Press to start play. Charge your iPod/iPhone Once the iPod/iPhone is connected and recognized, the charging starts.
8 Listen to an external player You can use the system to amplify the audio input from an external player, for example, MP3 player. MP3-LINK 1 2 Switch the source to [MP3--LINK]. 3 Play the external player. 20 EN Connect an MP3 link cable to .$ the MP3-LINK socket on the system, and .$ the audio output socket (usually the headphone socket) on the external player.
9 Adjust sound The following operations are applicable to all supported media. Button Function Rotate to increase or decrease the volume level. Press to mute the speakers or release them from mute status. Press to enable or disable the maximum volume. Press and hold to enable or disable the Dynamic Bass Boost (DBB) effect. Press repeatedly to select a sound equalizer. 1 Press and hold to activate the setup of customized sound equalizer.
10 Additional information Reset the system If the system works abnormally, reset the system to factory default settings. Replace the fuse If there is no power, check the fuse and replace it if it is damaged. 1 2 Check the electric connection. 3 Insert a new fuse with the same )5'1*(12%*"3)$=-S$KR7 Remove the damaged fuse from the rear panel. L REAR R Note 1 2 22 Detach the front panel. Press the RESET button with the tip of a ball-point pen or toothpick.
11 Product Information Note . 8%)41,46(1&"#+6')+#$9:)4(+(&+406";)+<1(0&$(+%'1&'+ notice. General Power supply Fuse Suitable speaker impedance Maximum power output Continuous power output Pre-Amp output voltage Aux-in level Dimensions - Main unit (W x H x D) Weight - Main unit 12 V DC (11 V - 16 V), negative ground 15 A 4-8 50 W x 4 channels 22 W x 4 RMS (4 10% T.H.D.) 2.5 V 500 mV 188 X 58 X 110 mm 0.
12 Troubleshooting Warning . Never remove the casing of this product. To keep the warranty valid, never try to repair the product yourself. If you encounter problems when using this product, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www. philips.com/support). When you contact the Consumer Care, make sure that the product is nearby and the model number and serial number are available.
13 Notice K39$1&23:')$"#$+"0*(12%*"3)$+20'$%"$%&*)$ device that are not expressly approved by WOOX Innovations may void the user’s authority to operate the equipment. Care of the environment Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/ EC.
14 Glossary M MP3 K$(6'$4"#+2%$A*%&$2$)",30$02%2$1"+5#'))*"3$ system. MP3 is the abbreviation of Motion Picture Experts Group 1 (or MPEG-1) Audio Layer 3. S SD Secure Digital. A type of memory card with a U2)&$+'+"#97 SDHC Secure Digital High Capacity (SDHC) is a type "4$U2)&$+'+"#9$12#0$?2)'0$"3$%&'$TNK$V7WW$ )5'1*(12%*"37$D&'$TNK$V7WW$)5'1*(12%*"3$'32?6')$ SD cards to reach higher capacities from 4GB to 32GB, and growing.
2013 © WOOX Innovations Limited. All rights reserved. Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used by WOOX Innovations Limited under license from Koninklijke Philips N.V. CE138_12_UM_V4.
