Register your product and get support at www.philips.
Contents 1 Safety 4 10 Product Information 23 2 Your car audio system 5 5 5 6 11 Troubleshooting 24 12 Notice 25 25 25 25 25 Introduction What's in the box Overview of the system 3 Install the car audio system 9 9 10 11 4 Get started 12 12 12 12 13 13 5 Listen to radio 14 14 14 14 14 15 6 Play from a storage device 17 18 19 7 Listen to an external device 20 8 Adjust sound 21 9 Additional information 22 22 22 Connect wires Mount into the dashboard Attach the front panel For the firs
1 Safety Read and understand all instructions before you use this device. If damage is caused by failure to follow instructions, the warranty does not apply. • The device is designed for negative ground (earth) 12 V DC operation only. • To ensure safe driving, adjust the volume to a safe and comfortable level. • Improper fuses can cause damage or fire. When you need to change the fuse, consult a professional. • Use only the supplied mounting hardware for a safe and secure installation.
2 Your car audio system Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Introduction With this system, you can: • enjoy audio from USB storage devices, SD card, SDHC card, and other external devices, and • listen to radio stations. • Unsupported files: AAC, WAV, and PCM files DRM protected WMA files (.wav, .m4a, .m4p, .mp4, and .
Overview of the system a b t srq c p o d n m u a b • Unlock the front panel. • • For .wma and .mp3 tracks, press to select the previous folder. Press and hold to access the system menu. Press to select a tuner band. • Return to the previous menu. • c d LCD screen e 6 • EN Connect to a USB storage device. e l k j ih g f v f MP3-LINK • Connect to the audio output socket (usually the headphone socket) of an external device. g • • • Start, pause, or resume the play of tracks.
h • • • i • • • j • • • k In radio mode, press to select the preset radio station of No. 4. In radio mode, press and hold to store the current radio station at channel No. 4. For .wma and .mp3 tracks, press repeatedly to select a play mode: play all tracks randomly ([SHU ALL]), play tracks in the current folder randomly ([SHU FLD]), or play all tracks in the storage device in sequence ([SHU OFF]). In radio mode, press to select the preset radio station of No. 3.
• Press and hold to enable or disable the DBB (dynamic bass boost) sound effect. t BAND • Press repeatedly to select a tuner band. u Slot for SD/SDHC card • Insert an SD/SDHC card. v RESET • Press to reset the system to factory default settings.
3 Install the car audio system Connect wires Note •• Make sure that all loose leads are insulated with electrical tape. •• Consult a professional to connect wires as instructed Caution below. •• Use the controls only as stated in this user manual. Always follow the instructions in this chapter in sequence. These instructions are for a typical installation. However, if your car has different requirements, make the adjustment accordingly.
2 Connect the antenna and amplifier as illustrated, if applicable. 1 Make sure that the car dashboard opening is within these measurements: m L 5m REAR R mm 53mm 183 d 1 2 3 4 c b a Sockets on rear panel External sockets or connectors For ISO male connectors REAR L REAR R ANTENNA As indicated above 2 Remove the mounting sleeve with the supplied disassembly tools.
4 Slide the unit into the dashboard until you hear a "click". Attach the front panel 1 2 5 Insert the notch on the front panel to the chassis on the main unit. Press the left end of the front panel inwards until it is securely locked with a "click". Attach the trim plate. Detach the front panel 6 Reconnect the negative terminal of the car battery. Note •• Before you insert an SD/SDHC card or reset the system, detach the front panel.
4 Get started For the first time use 1 2 3 Press to turn on the system. »» [PHILIPS] is displayed and then [SELECT OPERATING REGION] (select a radio region) scrolls. When one of the following options is displayed, rotate to select a radio region that matches your location.
Select a listening zone 1 2 Press and hold until one of the following options is displayed. • [ALL]: For all passengers • [FRONT-L]: For the front-left seat only • [FRONT-R]: For the front-right seat only • [FRONT]: For front passengers only Press / repeatedly to select a listening zone. Mute the button beep The beep sound of buttons is enabled by default. 1 2 3 Press and hold menu. to access the system Press / repeatedly until [BEEP ON] or [BEEP OFF] is displayed.
5 Listen to radio Search for a radio station automatically Select a tuner region You can select a radio region that matches your location. 1 2 3 In radio mode, press and hold the system menu. to access Press / repeatedly until one of the following options is displayed.
Store radio stations manually 2 1 3 2 3 Press BAND, , or select a tuner band. repeatedly to Tune to the radio station that you want to store. Press and hold , , , , , or to store the radio station at the selected channel. 4 NEWS AFFAIRS 4 5 Enable the RDS function 7 1 2 3 Press and hold menu. to access the system Press / repeatedly until [RDS ON] or [RDS OFF] is displayed. Rotate to select [RDS ON]. »» The RDS function is enabled. • To disable the RDS function, rotate to select [RDS OFF].
Item Program type Description 30 31 TEST ALARM Alarm Test Alarm • Use alternate frequencies If the signal of an RDS station is poor, enable the AF (Alternate Frequency) function to search for another station that broadcasts the same program. 1 2 3 Press and hold menu. to access the system Press / repeatedly until [AF ON] or [AF OFF] is displayed. Rotate to select a setting. • [AF ON]: Enable the AF function. • [AF OFF]: Disable the AF function.
6 Play from a storage device 1 2 3 Connect a supported USB storage device or SD/SDHC card. • For an SD/SDHC card, detach the front panel first, insert the card into the card slot, and then attach the front panel. Switch the source to [USB] or [SD/ SDHC]. • When a USB storage device is connected and recognized, the system switches the source to [USB] automatically. If the play does not start, press .
Control play Button Function Press repeatedly to select a folder. / Pause or resume play. / Press to play the previous or next track. / Press and hold to rewind a track or search forward fast. /DISP Press repeatedly to display available information about the current track. Press repeatedly to select a repeat mode: • [REP ONE]: repeat the current track, • [RPT FLD]: repeat all tracks in the current folder, or • [RPT ALL]: repeat all tracks in the storage device.
Switch tracks During play, you can switch tracks or folders quickly. Switch tracks directly 1 2 3 Press to access the track list. »» The file name of current track scrolls. Rotate Press to toggle through tracks. to play the selected track. Switch folders for a track 1 2 3 4 5 Press to access the folder list. »» [ROOT] scrolls. Rotate to toggle through folders. »» The name of current folder scrolls. Press Rotate the folder. Press to select the folder.
7 Listen to an external device You can use the system to amplify the audio input from an external device, for example, MP3 player. MP3-LINK 1 2 3 20 Switch the source to [MP3--LINK]. Connect an MP3 link cable to • the MP3-LINK socket on the system, and • the audio output socket (usually the headphone socket) on the external device. Play the external device.
8 Adjust sound The following operations are applicable to all supported media. Button Function Rotate to increase or decrease the volume level. Press to mute or restore sound. Press to enable or disable the maximum volume. Press and hold to enable or disable the Dynamic Bass Boost (DBB) effect. Press repeatedly to select a sound equalizer. 1 Press and hold to activate the setup of customized sound equalizer.
9 Additional information L REAR R Reset the system If the system works abnormally, reset the system to factory default settings. Note •• If the fuse gets damaged immediately after it is replaced, an internal malfunction may occur. In such case, consult your Philips retailer. 1 2 Detach the front panel. Press the RESET button with the tip of a ball-point pen or toothpick. »» All settings are reset to factory default.
10 Product information Note •• Specifications are subject to change without prior notice. General Power supply Fuse Suitable speaker impedance Maximum power output Continuous power output Pre-Amp output voltage Aux-in level 12 V DC (11 V - 16 V), negative ground 15 A 4-8 50 W x 4 channels 22 W x 4 RMS (4 10% T.H.D.) 2.5 V 500 mV Radio Frequency range - FM Usable sensitivity FM (S/N = 20 dB) Frequency range AM(MW) Usable sensitivity AM(MW) (S/N = 20 dB) 87.5 - 108.
11 Troubleshooting Warning •• Never remove the casing of this product. To keep the warranty valid, never try to repair the product yourself. If you encounter problems when using this product, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www. philips.com/support). When you contact Philips, make sure that the product is nearby and the model number and serial number are available. No power or no sound.
12 Notice Any changes or modifications made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment. Compliance Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.
13 Glossary M MP3 A file format with a sound data compression system. MP3 is the abbreviation of Motion Picture Experts Group 1 (or MPEG-1) Audio Layer 3. S SD Secure Digital. A type of memory card with a flash memory. SDHC Secure Digital High Capacity (SDHC) is a type of flash memory card based on the SDA 2.00 specification. The SDA 2.00 specification enables SD cards to reach higher capacities from 4GB to 32GB, and growing.
Specifications are subject to change without notice © 2012 Koninklijke Philips Electronics N.V. All rights reserved. CE132_10_UM_V1.
