Audio CD Recorder CDR950/951 • Instructions for use • Mode d'emploi • Instrucciones de manejo • Bedienungsanleitung • Gebruiksaanwijzing • Istruzioni per l'uso • Brugsanvisning • Bruksanvisning • Käyttöohje • Manual de utilização • O‰ËÁ›Â˜ ¯Ú‹Ûˆ˜ • Instrukcja obs¬ugi
CONTROLS AND CONNECTIONS English 3 4 5 6 7 8 9 10 11 12 13 14 15 16 2 1 RECORD 26 25 24 23 22 21 20 19 18 17 ANALOG IN L R R 1 Controls on the front 1 2 3 4 5 6 7 8 9 0 ! @ # $ % ^ & * 8 ON/OFF ........................turns the CD recorder ON and OFF Standby indicator DISPLAY......................selects display information/text SCROLL........................activates scrolling of text over the display (once) PROGRAM ..................opens/closes program memory REPEAT.................
Connections general Analog connections For recording the following inputs are present: - Digital optical input. - Digital coaxial input 1. - Digital coaxial input 2. - Analog input. Analog connection is required for playback of CDs (use cable 2) and for recording from external analog sources (use cable 1). For playback the following outputs are present: - Digital coaxial output. - Digital optical output. - Analog output. We advise you to connect these to the CD input on your amplifier.
INSTALLATION English Digital coaxial connections Digital optical connections Digital coaxial connection is only required in case you wish to record from a CD player with a digital coaxial output. Digital optical connection is only required in case you wish to record from a CD player with a digital optical output.
INSTALLATION Inserting batteries in the remote control English Power supply 1 Plug the power cord supplied into the MAINS connector on the CD recorder, then into a mains socket. 2 Press ON/OFF. ➜ The recorder is now in Standby mode. 3 Press any key to activate the recorder. Note: - The CD recorder will automatically adjust to the local mains voltage. - When the CD recorder is in the Standby mode, it is still consuming some power.
