GENERAL INFORMATION [ syringing Table of contents GENERAL INFORMATION Technical data... Disc for recording Sises for playback. Maintenance Accessories CONTROLS AND CONNECTIONS Controls on the front. Connections at the back DISPLAY DISPLAY explanation DISPLAY messages INSTALLATION Connections general .. .8 Analog Digital coaxial connections. Digital optical connections Power Setup Inserting batteries in the remote control REMOTE CONTROL & INSERTING DISCS Remote control commands Inserting discs...
GENERAL INFORMATION Discs for recording ]Maintenance For recording use, special audio discs must be used {for music only}. These Discs bear the logos as shown below. The text ‘DIGITAL AUDIO" is present ! Copyright fees have been paid on these sides in some countries. Your recorder uses two types of discs for retarding purposes: GD-Audio Record able {CD-R} sides: COMPACT Fully recorded and finalized, these discs play on all CO players and recorders.
CONTROLS AND CONNECTIONS ysibuz {0l [14) 42 [ 1 Controls on the front Connections at the back ON/OFF turns the GO recorder ON and OFF Connection to mains Disc tray connects to the line output of an AUTO/MANUAL . . selects track increase method [4] SOURCE. . selects digital or analog input [5] DISPLAY . selects display information [8] DISPLAY {information screen) ERASE .. . erases recording FINALIZE . finalizes recording {51 OSCILLOSCOPE . . opens/closes disc fray RECORD. .. .. records .. .
DISPLAY [DI§PLAY explanation ] DISPLAY messages analog input is selected fights when digits! input is selected and flashes when digital input is incorrect. {3] AUTO TRACK . automatically increasing track numbers {4) repeat function activated during play {8] Track number and time. (6] CD-SYNC synchronized recording is active. [RERECORD lights during recording and flashes in record standby (8] FINALIZE.
INSTALLATION busybody general | For recording the CD recorder has the following inputs: Digital optical input « Digital coaxial input Ana lag input For play back the CIJ recorder has the following outputs: Digital coaxial output Analog output The connections you make will depend upon the possibilities your audio equipment offers. Please refer to the user manuals for your other audio equipment first.
INSTALLATION Digital coaxial connections [pigtail optical connections Use the supplied cable with the black plugs. 1 For recording, connect the cable (3) between the DIGITAL IN-socket on the CD recorder and the DIGITAL OUT-socket of a CD player, Nate: Your CD recorder is equipped with a digital coaxial output. This output can be used for digital playback. 1 Remove the dust caps from the digital optical connections. {We recommend you to save the caps).
REMOTE CONTROL & INSERTING DISCS Remote control commands Inserting discs [ PROGRAM. programs track numbers DISPLAY .. . selects display information Number keys Valets a track by number plays DIRAC) or program in random order -« Searches backward PREVIOUS selects the beginning of a previous track STOP M. stops COWER} and clears a program PAUSE . interrupts COWER) play NEXTI™ selects the beginning of subsequent track starts COWER) play .. Searches forward . repeat play . CDR 765 only . COR 765 only ..
RECORDING ysyffiug Remarks about recording [ You will span discover how easy it is o make your own C0s. Nevertheless, it is advisable to use a CB-RE disc for your first try. We will describe the 3 ways to make recordings: Digital synchronized Digital synchronized Analog + The recording procedure is the same for CD-Rs or CO-B's. « |f the disc is a CD-BE and is already finalized you must finalize it first {o.
REGARDING Start digital recording 1 With the recorder stopped, press RECORD to enter the Record standby mode. «» econ flashes. also flashes, the digital connection is incorrect. 2 To start recording, press PLAY and immediately start the source {from stop-rode). «» RECORD lights continuausly. The track number and recording time used appear on the display. » To record a 3-second silence at the start of a track, press PAUSE. » To check the {remaining) recording time, press DISPLAY.
RECORDING ysyjfiug J Note: The CD recorder will not start until it recognizes a digital signal. Although the reaction time is less than 200 milliseconds, the very beginning of the music may sometimes not be recorded. If this happens, you can start the recording manually [see digital recording synchronize. Recordings from DAT or DCC will only stop after 20 seconds silence. 14 Analog recording e m Graphite < m Only make analog recordings if digital recording is not possible.
RECORDING Start analog receding 1 To start recording, press PLAY on the CD recorder and immediately start the source. Re corp lights continuously. The track number and recording time used appear on the display. * To record a 3-second silence at the start of a track, press PAUSE. * To check the {remaining) recording time, press DISPLAY. {This can lase be done during the retarding) 2 To stop recording, press $TOP on the CD recorder. ~¥ RECORD gens aut. « To interrupt recording, press PAUSE.
ERASING & PLAYING | ladybug [Erasing CD-RE discs [ Playing a GD For CD-RE sides only. e You can erase: w\ Commode o To erase the last track 1 Make sure the disc is not finalized {Showing TFC on m display during start up). Otherwise finalize first (p.15} 2 Press ERASE. «» On the display, TECH and East flash. 3 Crass RECORD within 3 seconds. ~» TRASH and eras light continuously during erasure.
PLAYING \Sectioning a track or searching ! Selecting a track during play 1 Briefly press i ar »» one or more times. «> Play skips to the beginning of the present, previous or subsequent tracks. o * Key in the required track number using the numerical keys on the remote control, For 2-digit track numbers, press the keys in rapid succession. = Piaf skips to the beginning of the selected track. Selecting a track when CD play is stopped 1 Briefly press e or » one or more times.
FIXING PROBLEMS ysijfiug o Troubleshooting 1f you think your CD recorder is defective, it is wise to check this list first and run the diagnostic program. Maybe you have forgotten a simple step. Warning! Under no circumstances should you attempt te repair the €D recorder yourself as this will invalidate the guarantee.
