operation manual

ManualsBrandsPhilips ManualsHome AudioCDC775/00

3139 116 17401

Compact Disc Changer

CDC775

Untitled-19 6/15/00, 1:34 PM1

Summary of content (16 pages)

PAGE 1
CDC775 Compact Disc Changer 1 Untitled-19 1 6/15/00, 1:34 PM 3139 116 17401
PAGE 2
English Important notes for users in the U.K. Italia Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: 1 Remove fuse cover and fuse. 2 Fix new fuse which should be a BS1362 5 Amp, A.S.T.A. or BSI approved type. 3 Refit the fuse cover. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug contains a fuse, this should have a value of 5 Amp.
PAGE 3
Nederlands ............................56 Italiano ...................................69 Svenska .................................82 Dansk .....................................95 Français Español Português ............................121 Português CLASS 1 LASER PRODUCT ∂ÏÏËÓÈÎ¿ ............................ 134 ∂ÏÏËÓÈÎ¿ Suomi ...................................108 Italiano Nederlands Deutsch Deutsch ..................................43 Svenska Español ..................................
PAGE 4
CDC775/22-Eng 6/15/00 1:37 PM Page 4 English CONTENTS INTRODUCTION Introduction . . . . . . . . . . . . . . . . . . . . . . .4 Thank you for selecting the Philips CDC 775 Compact Disc Changer.
PAGE 5
CDC775/22-Eng 6/15/00 1:37 PM Page 5 English INSTALLATION COAXIAL R L DIGITAL OUTPUT ANALOG OUT 1 2 Connections 1 Digital Out This output supplies digital signal and can therefore only be connected to an input which is suitable for this signal. Use here a lead with one cinch plug on either end. Never connect this socket to a non-digital input of an amplifier, such as AUX, CD, TAPE, PHONO etc! 2 Analog Out For the connecting cable to the amplifier.
PAGE 6
CDC775/22-Eng 6/15/00 1:37 PM Page 6 FUNCTIONAL OVERVIEW English 1 23 4 5 6 7 8 9 0! @ # $ % CDC 775 • COMPACT DISC CAROUSEL CHANGER POWER ON/OFF CD TEXT PROG SCAN TRACK 4 REPEAT SCROLL 3 TIME TOT REM TRACK NEXT STOP PLAY PAUSE 1 CD DIRECT PLAY DISC SELECT PAUSE REPEAT 1 DISC SHUFFLE FADE/ P-SEARCH DIGITAL OUTPUT PREV TIME 5 2 PROGRAM EDIT PEAK % – – – 1 IR SENSOR 2 3 4 5 SHUFFLE CD REWRITABLE COMPATIBLE MULTI DISC CHANGER OPEN / CLOSE ^ & * PHONES LEVEL MIN
PAGE 7
CDC775/22-Eng 6/15/00 1:37 PM Page 7 Remote Control DISC 5 TRAY OPEN 4 PROG. SCAN SHUFFLE 1 2 3 4 5 6 7 8 9 3 2 6 PAUSE 1 7 REPEAT 8 9 0 VOLUME 12 10 PLAY PREV. í É STOP NEXT ë 10 Ç 11 DIGITAL REMOTE CONTROL 2 X 1.5 V R03 / UM4 / AAA PAUSE ; Interrupting play. 2 SCAN Automatically playing the beginning of each track. 3 PROG. Opening the memory when compiling a program. 4 DISC – Selecting another CD during play. – Selecting a CD to start play with.
PAGE 8
CDC775/22-Eng 6/15/00 1:37 PM Page 8 FUNCTIONAL OVERVIEW English Display TRACK 4 3 PEAK TOT REM TRACK TIME 5 2 PROGRAM 1 SHUFFLE PAUSE REPEAT 1 DISC { – Lights up when the changer receives a command from the remote control. 4 3 5 1 1 - 5 CD number indicator – Lights up when you switch the changer on. – Indicates the number of CDs in the CD compartment. – Indicates what CD is being played (CD number flashes). PROGRAM – Flashes when a program is being compiled.
PAGE 9
CDC775/22-Eng 6/15/00 1:37 PM Page 9 Inserting the CDs NOTE! Use only audio CD; audio CD-R or audio CD-RW. • Press POWER-ON/OFF to switch the changer on. – The changer will now start CD detection to check how many CDs there are in the CD compartment. The turntable will rotate slowly until all positions (1 - 5) in the CD compartment have been checked. – The position which is being checked is always shown on the display (dISC X).
PAGE 10
CDC775/22-Eng 6/15/00 1:37 PM Page 10 PLAYBACK English Selecting Another Track During Play (S T) • Press T or S (less than 0.5 seconds) until the desired track number appears under TRACK. TRACK TRACK TIME 5 – The music stops and a moment later the selected track begins to play. WRONG tRACK lights up when you select a nonexistent track number. Selecting Another CD During Play (CD DIRECT PLAY) • Key in the desired CD number. – The music stops and a moment later the selected CD begins to play.
PAGE 11
CDC775/22-Eng 6/15/00 1:37 PM Page 11 Playing In Random Order (SHUFFLE) All CDs: • Press SHUFFLE before or during play. – If the CD compartment was open, it will now close. – SHUFFLE lights up and all the tracks are now played in a random order. TRACK TRACK TIME 3 SHUFFLE – If you press T, you will select any one of the following tracks. • Press SHUFFLE again if you wish to return to normal play.
PAGE 12
CDC775/22-Eng 6/15/00 1:37 PM Page 12 PLAYBACK English Note: – Repeating of a CD is not possible during shuffle or program mode. Repeating all CDs: • Press REPEAT three times before or during playback. – REPEAT lights up; all CDs will now be repeated continuously. TRACK TRACK TIME NOTE! – When a program has been stored (for one or more CDs), then only the program will be repeated.
PAGE 13
6/15/00 1:37 PM Page 13 PLAYBACK Activating The Fade-In And Fade-Out Function (FADER) NOTE! – The FADER function can be used if the changer is connected to the amplifier or the system via the ANALOG OUT output. • During play press FADER. – The sound level will now gradually decrease (FADE OUT), after which the changer will go into the PAUSE mode. FAdE ≠ f ™ FAdE ≠ ™ FAdE _ • Press FADER again. – Play continues and the sound level will increase again to the originally set level (FADE IN).
PAGE 14
CDC775/22-Eng 6/15/00 1:37 PM Page 14 EDIT English The EDIT function has two recording modes in which you can store the recording time in the changer memory. EDIT NORMAL – The changer will determine which tracks fit on each side of the tape and will stop after the last track. The tracks will be recorded in the order in which they appear on the CD(s). EDIT OPTIMAL – The changer now calculates the combination of tracks that will optimize the use of available recording time.
PAGE 15
6/15/00 1:37 PM Page 15 EDIT • Press PLAY 2. – The remaining tracks will now be played. – After the last track play will stop; EdIt CANCELLEd lights up. NOTE! – As soon as you press PLAY 2 the other changer functions will temporarily be switched off to prevent the recording being interfered with; EDIT ACTIVE lights up if you press one of the other buttons during recording. – You can quit the EDIT mode by pressing STOP 9. or OPEN/CLOSE ; EDIT CANCELLED then lights up.
PAGE 16
CDC775/22-Eng 6/15/00 1:37 PM Page 16 ADDITIONAL INFORMATION English Technical Data Typical Audio Performance Frequency range: . . . . . . . . . . . . . . . . . . .20 Hz - 20 kHz Amplitude non-linearity: . . . . . . . ≤ 3 dB (1 kHz, -90 dB) Dynamic range: . . . . . . . . . . . . . . . . . . . .>90 dB (1 kHz) Signal-to-noise ratio: . . . . . . . . . . . . . . . .>95 dB (1 kHz) Channel separation: . . . . . . . . . . . . . . . . .>95 dB (1 kHz) Channel unbalance . . . . . . . . . . . . . . . . . .