FITTING A MAINS PLUG (U.K. only] This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: + Remove fuse cover and fuse. ¢ Fix new fuse which should be a BS1362 54, AS.TA. or BSI approved type, * Refit the fuse cover. 1f the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug filed in its. place.
CONTENTS INTRODUCTION Power supply Siting the Compact Disc Chanel Connecting headphones | FUNCTIONAL Front of changer PLAYBACK. inserting CDs.. Normal playback Selecting another track during play Selecting another D during play Searching for a passage during play. Starting with a particular CD Starting with a particular track Scanning CDs Playing in random order Calling up other information on the display .
POWER SUPPLY SETTING * Check that the types plate on the rear of your changer indicates the correct supply voltage. * if your main supply voltage is different, consult your dealer or owr Service Organization. Certain versions of this changer are skipped with a voltage erector 4, which enables you to set the player to the correct sang voltage yourself.
FRONT OF CHANGER 1 13 [t | Switching on and off, — Selecting another track during play. DISC SELECT — Selecting a track to start play with, L m Selecting another CD during play. Selecting a CD to start play with. Selecting CDs when compiling a programmer. 3a PROGRAM Opening the memory when compiling a programmer, b SCAN Automatically playing the beginning of each track. ¢ EDIT Activating the EDIT function when making a tape recording. d FARED Fading in and out during play.
' FUNCTIONAL OVERVIEW REMOTE CONTROL DISPLAY X PHILIPS COTAFBITTERIATRCL C— — 2X15VR0O3/ UM4/AAA 1 PAUSE Interrupting play. 2 scan Automatically playing the beginning of each track, PRIG. Not functional for this medal DISC Selecting another CD during play. Selecting a CD to start play with. Selecting CDs when compiling a programmer. TRAY OPEN C Opening and closing the CD compartment. 6 SHUFFLE Playing in random order. 7 1-DIGITIZES Selecting another track, Selecting 8 frack to start play with.
PLAYBACK i INSERTING THE CDs NOTE! Use only audio CDs; no CD-ROM, CD1 or CDV, * Press POWER 17 to switch the changer on, The changer will now start CD detection to check how many CDs there are in the CD compartment. The turntable will rotate slowly unit all positions the CD compartment have been checked. ~ The position which is being checked is always shown on the display (BIB ~ After CD detection the 16 CD number indicator will show the number of CDs in the CD compartment.
PLAYBACK SELECTING ANOTHER TRACK DURING PLAY [ ) * Crass less than 0.5 seconds) until the desired track number appears under TRACK. s e e len | B 140 ~ The music tops and a moment later the selected track begins to play. KOG TRACK Lights up when you select a nor-existent track number, SELECTING ANOTHER CD DURING P‘LAV {DISC SELECT) * Key in the desired CD number. The music stops and & moment later the selected CD begins 10 play.
PLAYBACK. CALLING UP INFORMATION ON THE DISPLAY (TIME)} In STOP mode: Text display ~ After loading the CDs and closing the CD compartment, the display shows the number of the CD 1o be played {= default display in STOP made}. ege T150 7 During play: 1. Rime display When you start play (from STOP mode), the display shows the elapsed playing time of the current track {= default display in PLAY mode). ey ik .
ADJUSTING THE SOUND LEVEL ACTIVATING THE FADE IN AND FADE-OUT FUNCTION -~ VOLUME +) {FARED) NOTE! NOTE! Use the -~ VOLUME + keys fon the remote control only if The FARED function can be used if the changer is connected to the changer i§ connected vja the‘ANALOG OUT output to an the amplifier or the system via the ANALOG OUT output. amplifier or Whiff system without its own control. « During play press FARED 2d.
EDIT memory. recording time. signal from the changer. The EDIT function has two recording modes in which you can store the recording time of the tape in the changer EDIT NORMAL The changer will determine which tracks fit on each side of the tape and will stop after the last track. The tracks will be recorded in the order in which they appear on the Disc.
ADDITIONAL INFORMATION STAND BY » When the changer is incorporated in a WiFi system, the changer can be set to STAND BY with the STAND BY button on the cremate control of the stern. The changer will go to STAND BY mode automatically if the whole stern is set to STAND BY mode. it the CD compartment was open, it will now close. ~ Any programmer present will be erased.
If a fault scours, run through the points listed below before taking your changer for repair. [f the fault remains, try to clear it by switching the changer off and on again. If this also fails to help, consult your dealer. Under no circumstances should you repair the changer yourself as this will invalidate the guarantee! SYMPTOM POSSIBLE CAUSE REMEDY Playback does not start or interruption of playback. The current CD has been loaded upside down. No CDs inserted.
