Quick start guide

What’s in the box
R
Handset
Charger
User manual
Power supply
Guarantee Quick Start Guide
Note
Caution
In some countries, you have to connect the line adaptor to the line cord, then •
plug the line cord to the line socket.
In multi-handset packs, there are additional handsets and chargers with power •
supply units.
Use only the supplied batteries and adaptor •
1
2
Enjoy
Install
Install the handset
1 Press and dial the phone number; or
2 Dial the phone number and Press
to dial out the call.
1 Press menu.
2 Select [PERSONAL SET] > [HANDSET TONES] > [RING
TONES], then press [SELECT] to conrm.
3 Select a ringtone, then press [SELECT] to conrm.
The setting is saved.
»
1 Press menu.
2 Select [PHONEBOOK] > [NEW ENTRY], then press
[SELECT] to conrm.
3 Enter the name then press [OK] to conrm.
4 Enter the number, then press [SAVE] to conrm.
When the phone rings. Press
or to answer the call.
Press
.
Press
or to adjust the volume during a call.
1 The batteries are pre-installed in the handset. Pull the battery tape off from
the battery door before charging.
2 Place the handset on the charging cradle to power up.
R
Congure your phone (if necessary)
Make a call
Set the handset’s ringtone
Add a record
Answer a call
End a call
Adjust the earpiece volume
Set the date and time.
The phone is now ready to use.
»