Χ∆530_Χ∆535_ΘΣΓ_ΕΝ.
Χ∆530_Χ∆535_ΘΣΓ_ΕΝ.φµ Παγε 2 Ωεδνεσδαψ, Μαρχη 1, 2006 3:52 ΠΜ What’s in the box Handset Base station Line cord 2 AAA rechargeable batteries User Guide Quick Start Guide Power supply for base station Battery door Warranty card The line adaptor may not be attached to the line cord. In this case, you have to connect the line adaptor to the line cord first before plugging the line cord to the line socket.
Χ∆530_Χ∆535_ΘΣΓ_ΕΝ.φµ Παγε 3 Ωεδνεσδαψ, Μαρχη 1, 2006 3:52 ΠΜ EN 1 Connect Connect the base station 1. Place the base station in a central location near the telephone line socket and electricity sockets. 2. Connect the line cord and the power cable to the proper connector at the back of the base station. B 1. A 2. Connect the power supply A A Connect the line cord to the line socket B 3.
Χ∆530_Χ∆535_ΘΣΓ_ΕΝ.φµ Παγε 4 Ωεδνεσδαψ, Μαρχη 1, 2006 3:52 ΠΜ 3 Enjoy Make a call Enter the phone number and press r. OR Press r and enter the phone number. Answer a call When the phone rings, press r key. End a call Press e key. Adjust earpiece volume during a call Press : to select from Volume 1 to Volume 5. Set the ring melody 1. Press mMENU, scroll : to Personal Set and press mSELECT, press Handset Tones, scroll : to Ring Melody and press mSELECT. 2.
Χ∆530_Χ∆535_ΘΣΓ_ΕΝ.φµ Παγε 5 Ωεδνεσδαψ, Μαρχη 1, 2006 3:52 ΠΜ EN Switch the handset On/Off Press and hold e key for 5 seconds to switch off the handset in stand-by mode. Short press e key to switch on the handset again. Keypad lock/unlock Press and hold * key for 2 seconds to lock and unlock keypad in stand-by mode. Paging 1. Press c key on the base until the handset starts to ring. 2. Once the handset is retrieved, press e to end the paging. Press To m Enter the main menu from stand-by mode.
Χ∆530_Χ∆535_ΘΣΓ_ΕΝ.φµ Παγε 6 Ωεδνεσδαψ, Μαρχη 1, 2006 3:52 ΠΜ Troubleshooting For more information, please refer to p.50 of CD530 user manual and p.58 of CD535 user manual.
