Quick start guide CD480/CD485
What’s in the box Base station (CD485) Handset* Charger* Base station (CD480) Power adapter* Line cord** User manual Quick start guide Guarantee Note * In multi-handset packs, there are additional handsets, chargers and power adapters. ** In some countries, you have to connect the line adapter to the line cord, then plug the line cord to the telephone socket. Caution • Use only the supplied batteries and power adapter.
1 Connect Connect the base station Power socket Telephone socket Power socket Power adapter 1 Telephone base station 2 3 Extra handset charger 1 Connect each end of the power adapter to: • the DC input jack at the bottom of the base station; • the power socket on the wall. 2 Connect each end of the line cord to: • the telephone socket at the bottom of the base station; • the telephone socket on the wall.
2 Get started Configure your phone 1 The batteries are pre-installed in the handset. Pull the battery tape off from the battery door before charging. 2 When using your phone for the first time, you see a welcome message (country dependent). 3 Please set the country and language if prompted. 4 Set the date and time. • If the time is in 12-hour format, press / key to select [AM] or [PM].
Charge your phone Place the handset on the base station to charge the handset. When the handset is placed correctly on the base station, you hear a docking sound. »» The handset starts charging. Note Charge the batteries for 8 hours before first use. Charge 8 hours Check the battery level When the handset is off the base station/charger, the bars indicate the battery level (full, medium and low). When the handset is on the base station/charger, the bars flash until charging completes.
3 Enjoy Call • To make a call, press and dial the phone number. • To answer a call, press when the phone rings. • To end a call, press . Adjust the earpiece volume Press or to adjust the volume during a call. Add a contact in the phonebook 1 Press . 2 Select [Option] > [Add new], then press [OK] to confirm. 3 Enter the name then press [OK] to confirm. 4 Enter the number, then press [Save] to confirm. Record an announcement (for CD485 only) 1 Press [Menu].
Listen to messages recorded on the answering machine (for CD485 only) Switch on/off the answering machine: Press . Start/Stop listening to the recorded messages: Press . Adjust the volume: Press / . Skip backward: When you listen to the messages, press to listen to the message from the beginning. During the first second of the current message, press to listen to the previous message. e Skip forward: Press to skip to the next message. f Delete the current message: Press .
Welcome to Philips Register your product at www.philips.com/welcome Need help? User manual Refer to the user manual that came with your new phone. Online help www.philips.com/support Reproduction in whole or in part is prohibited without the written consent of the copyright owner. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. © 2011 Koninklijke Philips Electronics N.V. All rights reserved. 0979 QSG_CD480-485_05_EN_V2.
