Register your product and get support at www.philips.com/welcome CD440 EN Digital Cordless Telephone ! Warning Use only rechargeable batteries. Charge each handset for 24 hours before use.
Table of contents 1 1.1 1.2 1.3 1.4 Important Safety information Power requirements Conformity Recycling and disposal 3 3 3 3 3 2 2.1 2.2 2.2.1 2.2.2 2.2.3 Your phone What’s in the box Overview of the phone Handset Display icons on the handset Base station 5 5 6 6 8 8 3 3.1 3.2 3.3 Getting started Connect the base station Install rechargeable batteries Place the handset on the charging cradle Configure your phone How to power off or on the handset power 9 9 9 3.4 3.5 4 4.1 4.1.1 4.1.2 4.1.3 4.1.
5.7.4 5.7.5 5.7.6 5.7.7 5.7.8 5.7.9 5.7.10 5.7.11 5.7.12 5.8 5.8.1 5.8.2 5.8.3 5.8.4 5.8.5 5.8.6 5.8.7 5.9 5.9.1 5.9.
1 Important Take time to read this user manual before you use your CD440. It contains important information and notes regarding your phone. 1.1 Safety information This equipment is not designed to make emergency calls when the power fails. An alternative has to be made available to allow emergency calls. The default product PIN code is preset to 0000. If you change this PIN code, keep the PIN details in a safe place where you have easy access to them. Do not lose the PIN code.
Use one of the following disposal options : • Dispose of the complete product (including its cables, plugs and accessories) in the designated WEEE collection facilities. • If you purchase a replacement product, hand your complete old product back to the retailer. He should accept it as required by the WEEE directive. Disposal instructions for batteries : Batteries should not be disposed of with general housedhold waste.
2 Your phone Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. 2.1 What’s in the box Telephone handset Base station Power supply unit - + + - Line cord 2xAAA Rechargeable batteries User Manual Warranty card Quick start guide Belt clip (Country dependent) Note The line adaptor may not be attached to the line cord. You may find the line adapter in the box.
2.2 Overview of the phone 2.2.1 Handset A B C D E 6 A Event LED OFF : No new events RED BLINKING : Unread events (example : a missed call if you have subscribed the Caller Line Identification Service (CLI) from your network provider.
F G H I J K L M Your phone F Talk off/Exit key In idle mode : Long press for about 5 seconds to power off the handset. If the handset is powered off, short press to power on the handset. In idle mode : If voice mail waiting icon is on, long press to turn off the voice mail waiting icon. In menu mode : Long press to return to idle mode, short press to return to previous menu.
2.2.2 Display icons on the handset Indicate battery level Display when the battery is fully discharged Display when the battery is running low Display when the battery is partially charged Display when the battery is fully charged Display battery icon animation during charging Display when the phone is in use. Blink during ringing.
3 3 Getting started Connect the base station Caution Avoid placing the base station too close to large metal objects such as filing cabinets, radiators or electrical appliances. This can impair the range and sound quality. Buildings with thick internal and external walls may impair transmission of signals to and from the base. ! Warning Power is applied when the power adaptor is plugged into the unit and connected to the electricity socket.
3 When the handset is fully charged, displayed is 3.4 Configure your phone Depending on your country, the WELCOME screen may not appear. In that case, you do not need to select the country code to configure your phone. Before using your phone, you need to configure it according to the country of use. After charging it for a few minutes, the WELCOME screen appears. Follow these steps to configure your phone : to display the list of countries 1 Press • Available country will display on the screen.
4.1.4 Call from the phonebook In idle mode : to access the phonebook 1 Press 2 3 • Press / to select your desired phonebook entry Press to dial the number The call is initiated. Tip Instead of pressing or to browse the phonebook entries, press the numeric key corresponding to the first letter of the phonebook entry that you wish to locate. For example, pressing once will show the entries starting with A. Pressing twice will show the entries starting with B. 4.1.
4.5.1 How to make a second call During a call : and / to select 1 Press INIT 2NDCALL to dial your second call number 2 Press • The second call is initiated. Note You can press and / to select SWITCH CALL or CONFERENCE to switch calls between the first and second calls or to make a conference call. 4.5.2 How to answer a second call To use this feature, you have to subscribe the service with your local service provider.
Press to call your desired handset Your desired handset rings. on the called handset to start 4 Press intercom Note You can press to switch the call between the internal call and the external call. on the calling handset 5 Long press • The calling handset, called handset and the external call would be in 3-way conference. 3 • During the conference call : to put the external call on hold 1 Press and go back to internal call • The external call is put on hold automatically.
3. Philips is committed to develop, produce and market products that cause no adverse health effects. 4. Philips confirms that if its products are handled properly for their intended use, they are safe to use according to scientific evidence available today. 5. Philips plays an active role in the development of international EMF and safety standards, enabling Philips to anticipate further developments in standardization for early integration in its products. 5 Use more of your phone 5.
5.2.1 How to store a number in the phonebook 4 5 In idle mode : to access the main menu 1 Press to select PHONEBOOK 2 Press to select NEW ENTRY 3 Press 4 Enter the name (maximum 12 characters) to enter the number (maximum 5 Press 24 digits) to choose a group (, , , ) to save the entry 7 Press • A beep tone is emitted and your phonebook entry is saved.
Key 2 will not display. If voice mail number and information service number of your network operator are unavailable, Key 1 and Key 2 will display on top of Key 3 as the direct access memory options, see section 5.8.2 and 5.8.3 for details. In idle mode : to access the main menu 1 Press to select PHONEBOOK 2 Press / to scroll to DIRECT MEM.
5.3.3 How to delete the call log entry In idle mode : to access the call log 1 Press to enter CALL LIST 2 Press / to select an entry 3 Press and / to select DELETE 4 Press to confirm 5 Press • A beep tone is emitted and the selected call log entry is deleted. 5.3.4 How to delete the entire call log In idle mode : to access the calls log 1 Press to enter CALL LIST 2 Press / to select an entry 3 Press to select DELETE ALL 4 Press to confirm 5 Press to re-confirm 6 Press • A beep tone is emitted.
5.5.2 How to set an alarm to access the main menu 1 Press / to select CLOCK&ALARM 2 Press and / to select ALARM 3 Press and / to select OFF, ON 4 Press ONCE, or ON DAILY Note If you have selected ON ONCE, or ON DAILY, enter the time for the alarm to save the settings 5 Press Note When the alarm is selected as ON ONCE or ON DAILY, will display on the screen. When the alarm is reached, the alarm tone will sound and ALARM will blink on the screen. You can press to mute the alarm tone. 5.5.
There are three phonebook groups (Group A, B, C) available for you to organize your contacts. Each group can be assigned a unique melody. to access the main menu 1 Press / to select PERSONAL SET 2 Press to select HANDSET TONE 3 Press and / to select GROUP 4 Press MELODY and / to scroll to your 5 Press desired group (GROUP A, GROUP B, GROUP C) and / to scroll to your 6 Press desired group melody Note The phone will play the corresponding melody when browsing the melody list. to save the settings 7 Press 5.
5.6.4 How to set the auto pick-up This function allows you to answer a call automatically by lifting the handset from the base station. to access the main menu 1 Press / to select PERSONAL SET 2 Press and / to select AUTO 3 Press PICK-UP and / to select ON or OFF 4 Press to save the settings 5 Press 5.6.7 1 2 3 4 5 5.7 5.6.5 How to set the auto hang-up This function allows you to end a call automatically by placing the handset on the base station.
5.7.3 Call barring Call barring enables you to restrict selected handsets from dialling a phone number beginning with certain numbers. You can set up to four different barring numbers, with each number containing up to four digits. Note You will be required to enter the 4-digit master PIN before you can activate or deactivate call barring mode, add or modify call barring number. 5.7.3.
5.7.5 How to manually select a base station One CD440 handset can register up to four different CD440 base stations. to access the main menu 1 Press / to select ADVANCED SET 2 Scroll and / to select BASE 3 Press SELECT and / to select your 4 Press desired base station to confirm 5 Press 5.7.6 How to register an additional handset The procedures described below are the procedures that you will find in your handset. The procedures may vary according to the handset you want to register.
Press to enter the 4-digit master PIN when prompted to enter the new 4-digit PIN 5 Press to enter the new 4-digit PIN again 6 Press for reconfirmation to save the settings 7 Press Note The default product PIN code is preset to 0000. If you change this PIN code, keep the PIN details in a safe place where you have easy access to them. Do not lose the PIN code. 4 5.7.9 How to reset to default settings You can reset your phone to the default settings (see Section 6).
The default numbers and values that are preset in your phone should be the best suited for your country network and therefore you do not need to change them. 5.8.1 Call forward There are three call forwarding options available : Unconditional Call Forwarding,When Busy and When Unanswered. 5.8.1.1 How to activate call forwarding to access the main menu 1 Press / to select NET.
Press to save the settings Tip When a voice mail number is set, press and hold will dial out to the voice mail number directly. 6 Information services from network operator This feature allows the caller to listen to information provided by your network provider. The availability of this feature is dependent of your country and your subscription with your network provider. This info are stored by the network rather than in your handset itself.
5.8.6 Withhold ID 5.8.6.1 How to activate withhold ID to access the main menu 1 Press / to select NET. SERVICE 2 Press and / to select 3 Press WITHHOLD ID and / to select ACTIVATE 4 Press 5 When the number has been dialled, press to return to idle mode 5.8.6.2 How to set up withhold ID number to access the main menu 1 Press / to select NET. SERVICE 2 Press and / to select 3 Press WITHHOLD ID and / to select 4 Press SETTINGS to enter the number 5 Press to save the settings 6 Press 5.8.
6 Default settings Items Handset name : Date : Time : Earpiece volume : Ring melody : Ring volume : Alarm : Alarm ringer melody : Key tone : Contrast : Auto pick-up : Auto hang-up : First ring : Language : Backlight : Recall time : Barring mode : Dial mode : Baby call mode : Master PIN : Conference mode : Default settings Default values PHILIPS --.
7 Menu structure The table below describes the menu tree of your phone. PHONEBOOK NEW ENTRY LIST ENTRY EDIT ENTRY DELETE ENTRY DELETE ALL DIRECT MEM KEY 1 ... * Key 1 and Key 2 may not appear as these options are country dependent KEY 9 PHB TRANSFER CLOCK&ALARM SET CLOCK ENTER DATE AND TIME ALARM OFF ON ONCE ON DAILY ALARM TONE MELODY 1 ...
HANDSET NAME AUTO PICK-UP ON OFF AUTO HANG-UP ON OFF LANGUAGE BACKLIGHT LIST OF LANGUAGES ON OFF ADVANCED SET RECALL TIME DIAL MODE TONE PULSE CALL BARRING BARR MODE ON OFF BARR NUMBER NUMBER 1 NUMBER 2 NUMBER 3 NUMBER 4 BABY CALL BABY MODE ON OFF BABY CALL NR. BASE SELECT BASE 1 BASE 2 BASE 3 BASE 4 *Only display the subscribed base stations. REGISTRATION UNREGISTER CHANGE PIN RESET AUTO PREFIX COUNTRY LIST OF AVAILABLE COUNTRIES CONFER. MODE OFF ON NET.
WITHHOLD ID ACTIVATE SETTINGS 30 Menu structure
8 Frequently asked questions www.philips.com/support In this chapter you will find the most frequently asked questions and answers about your phone. Connection The handset does not switch on! • Charge the battery : Put the handset on charger. After a few moments the phone will switch on. • Check the charger connections • Use only the SUPPLIED RECHARGEABLE BATTERIES The phone does not work at all.
Sound Handset does not ring! • Increase the volume • Make sure that the adaptor and the phone cord are connected properly • Move the handset closer to the base unit • Make sure the handset ringer is turned on Caller does not hear me! • Microphone may be muted : During a call, press .
D 9 Index A Accessories 4 Advanced Set 20, 21, 22, 23, 29 Alarm 8, 17, 18, 27, 28 Alarm tone 18, 28 Answer a call 11, 20 Answer a call in handsfree mode 11 Auto hang-up 20, 27, 29 Auto pick-up 20, 27, 29 Auto prefix 23, 29 B Baby call 21, 27, 29 Backlight 20, 27, 29 Base station 5, 8, 9, 16, 20, 22, 23, 31, 32 Battery level 8, 31 C Call 10 Call back 25, 29 Call barring 21, 22, 29 Call forward 24, 29 Call from the call log 10 Call from the phonebook 11 Call from the redial list 11 Call log 6, 8, 16, 17
L U Language 20, 27, 29 Line cord 5, 9, 31 Loudspeaker 7, 8, 14 Unmute 14 Unregister 22, 29 M Voice mail 15, 16, 24, 25, 29 V Make a call 10, 11 Master PIN 21, 22, 23, 27 Menu structure 28 Mute 6, 7, 14, 18 W Withhold ID 26, 30 N Network services 23 P Pause 7 Personal Set 18, 19, 20, 28 Phonebook 6, 8, 14, 15, 16, 17, 18, 19, 23, 26, 28, 32 Power requirements 3 Predialling 6, 10 Pulse 20, 29 Q Quick start guide 5 R Recall 11 Recall time 20, 27, 29 Recycling and disposal 3 Redial 6, 17 Registra
© 2007 Koninklijke Philips Electronics N.V. All rights reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner.
