Quick start guide CD280/CD285
What’s in the box Charger Power adapter  Handset Mode d’emploi Guide de mise en route Garantie Note • In some countries, you have to connect the line adapter to the line cord, then plug the line cord to the telephone socket. Caution • Use only the supplied batteries and power adapter.
1 Connect Connect the base station Power socket Power adapter Extra handset charger Connect each end of the power adapter to: • the DC input jack at the bottom of the extra handset charger. • the power socket on the wall.
2 Get started Configure your phone 1 The batteries are pre-installed in the handset. Pull the battery tape off from the battery door before charging. 2 Set the date and time. • If the time is in 12-hour format, press / key to select [AM] or [PM].
Charge your phone Place the handset on the base station to charge the handset. When the handset is placed correctly on the base station, you hear a docking sound. »» The handset starts charging. Note Charge the batteries for 8 hours before first use. Charge 8 hours Check the battery level When the handset is off the base station/charger, the bars indicate the battery level (full, medium and low). When the handset is on the base station/charger, the bars flash until charging completes.
3 Enjoy Call • To make a call, press and dial the phone number. • To answer a call, press when the phone rings. • To end a call, press . Adjust the earpiece volume Press or to adjust the volume during a call. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. © 2011 Koninklijke Philips Electronics N.V. All rights reserved.
