Register your product and get support at www.philips.
What’s in the box Base station OR Handset Battery door Base station with answering machine 2 AAA rechargeable batteries Power supply Line cord* User manual Guarantee Quick Start Guide *You may find in the box the line adaptor delivered separately from the line cord. In this case, you have to connect the line adaptor to the line cord first before plugging the line cord to the line socket.
1 Connect Connect the base station 1. Place the base station in a central location near the telephone line socket and electricity socket. 2. Connect the line cord and the power cable to their corresponding connectors at the back of the base station. 3. Connect the other end of the line cord and power cable to their respective sockets. 2 A Install Insert rechargeable batteries and charge Insert batteries B Charge handset for 24 hours Configure your phone (if necessary) 1.
3 Enjoy Make a call Dial the number (maximum 24 digits) and press t or l. OR Press t or l to take the line, and dial the number. Answer a call When the phone rings, press t or l. End a call To end a conversation, press h. Adjust earpiece or speaker volume During a call, press n to select from LEVEL 1 to LEVEL 5. Set the ring melody There are 10 ring melodies available on your handset. 1. Press m in idle mode, scroll n to PERSONAL SET and press o. 2.
Call from the phonebook 1. Press d in idle mode. 2. Scroll n to a phonebook entry. 3. Press t. • The call is initiated. Listen to messages recorded on the answering machine (for CD255/SE255 only) Press e on the base station to turn on the answering machine (the LED is turned on). The outgoing message is played. Press p on the base station to play phone messages (the first recorded message will be played first). Press f to skip the current message and play the next message.
Troubleshooting For more information, please refer to the User Manual that came with your phone. Problem • There’s no dialling tone! Solution • No power: Check the connections. • Batteries are empty: Charge the batteries. • Move closer to the base station. • Wrong line cord used: Use the line cord provided. • Line adaptor may be required: If applicable, connect the line adaptor to the line cord. • Caller does not hear me clearly! • Move closer to the base station.
