Owner's Manual

ManualsBrandsPhilips ManualsMisc ElectronicsPhilips CCZ192AT99

Owner’s Manual

Important!

Return your Warranty Registration

Card within 10 days. See why inside.

Color TV with built-in VCR

CCZ191AT

CCZ192AT

CCZ191/CCZ191comb.QX33 4/6/99 6:41 PM Page 1

Summary of content (52 pages)

PAGE 1
CCZ191/CCZ191comb.QX33 4/6/99 6:41 PM Page 1 Color TV with built-in VCR CCZ191AT CCZ192AT Owner’s Manual Important! Return your Warranty Registration Card within 10 days. See why inside.
PAGE 2
CCZ191/CCZ191comb.QX33 4/6/99 6:41 PM Page 2 Return your Warranty Registration card today to ensure you receive all the benefits you’re entitled to. Once your PHILIPS MAGNAVOX purchase is registered, you’re eligible to receive all the privileges of owning a PHILIPS MAGNAVOX product. So complete and return the Warranty Registration Card enclosed with your purchase at once. And take advantage of these important benefits.
PAGE 3
CCZ191/CCZ191comb.QX33 4/6/99 6:42 PM Page 3 Introduction 3 Welcome to your TV/VCR owner’s manual. This manual has six sections: Setting Up Your TV/VCR; Description of Controls; Basic Operations; Recording Options; Playing Options; and Information You May Need. The instructions explain all of the TV/VCR’s features, which are listed below.
PAGE 4
CCZ191/CCZ191comb.QX33 4/6/99 6:42 PM Page 4 4 Table of Contents Setting Up Your TV/VCR Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Before Using the TV/VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Hooking Up the TV/VCR . . . . . . . . . . .
PAGE 5
CCZ191/CCZ191comb.QX33 4/6/99 6:42 PM Page 5 Before Using the TV/VCR 5 Putting Batteries in the Remote Control 1 1 2 2 3 3 Remove the battery compartment lid on the bottom of the remote control by sliding it in the direction of the arrow. Place two AA batteries inside the battery compartment with their + and – ends aligned as indicated. Replace the battery compartment lid. Erasure Prevention 1 Video cassette tapes have record tabs to ensure that recordings are not accidentally erased.
PAGE 6
CCZ191/CCZ191comb.QX33 4/6/99 6:42 PM Page 6 6 Hooking Up The TV/VCR 1 Hook up your TV/VCR using one of the connections shown. A. Hooking Up Your TV/VCR With a Cable Signal or Outdoor Antenna Connect a Cable signal or an antenna to the ANT(enna) Jack. ANT. ANT. B. Hooking Up Your TV/VCR With a Cable Box To view any channel, set the TV/VCR to the Cable Box output channel (channel 03 or 04). Then, select channels at the Cable Box. Connect the Cable signal to the IN Jack on the Cable Box.
PAGE 7
CCZ191/CCZ191comb.QX33 4/6/99 6:42 PM Page 7 Hooking Up The TV/VCR (cont’d) 7 D. Hooking Up Your TV/VCR to Another Video Source (VCR or Camcorder) You may need this connection if you want to copy tapes. Details are on page 31. AUDIO/VIDEO OUT Jacks on VCR 3CH 4CH AUDIO VIDEO OUT IN Use an Audio cable to connect the AUDIO OUT Jack on the VCR to the AUDIO Jack on the front of the TV/VCR. IN ANT. OUT AUDIO VIDEO AUDIO VIDEO STOP/EJECT REW PLAY F.
PAGE 8
CCZ191/CCZ191comb.QX33 4/6/99 6:42 PM Page 8 8 Turning On the TV/VCR Before you turn on the TV/VCR, make sure there are batteries in the remote control and the TV/VCR is hooked up correctly. The instructions on this page work only when you turn on the TV/VCR for the first time. 1 1 SLEEP POWER ALT.CH Press the POWER button. The TV/VCR will come on and the screen shown below will appear. 1 2 3 4 5 6 7 8 9 0 +100 o MUTE VOLUME SELECT LANGUAGE SPEED ON ESPAÑOL 2 o PLAY REW F.
PAGE 9
CCZ191/CCZ191comb.QX33 4/6/99 6:42 PM Page 9 Language Selection 9 Follow the steps below to change the language of the on-screen displays. 1 2-4 Press the MENU button. > PRIM. SETUP PRESS B VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS SLEEP POWER ALT.CH 2 1 2 3 4 5 6 o CHANNEL 7 Press the PLAY/▲ button or the STOP/▼ button to select PRIM. SETUP. Then, press the F.FWD/ B button.
PAGE 10
CCZ191/CCZ191comb.QX33 4/6/99 6:42 PM Page 10 10 Automatic Channel Setup Although the TV/VCR may automatically memorize the channels you receive when you turn it on for the first time, you may set up channels again by following the steps below. 1 Press the MENU button. 5 2-4 Wait for the TV/VCR to set up channels. TO ADJUST PRESS { / B > INPUT CABLE SLEEP POWER EXIT PRIM. SETUP VCR PROGRAM VCR SETUP CAPTION ALT.
PAGE 11
CCZ191/CCZ191comb.QX33 4/6/99 6:42 PM Page 11 Automatic Channel Setup (cont’d) 11 Adding/Deleting Channels 1 3 Press the MENU button. SLEEP POWER TO ADJUST PRESS { / B CH123 SAVED > CHANNEL INPUT EXIT PRIM. SETUP VCR PROGRAM VCR SETUP 2 3 4 5 6 o CHANNEL 7 2 8 9 0 +100 o MUTE VOLUME SPEED p p o PLAY o Press the PLAY/▲ button or the STOP/▼ button to select CHANNEL. 1 REW F.FWD o 2 ALT.CH STOP p TO ADJUST PRESS { / B CH123 SAVED > CHANNEL INPUT EXIT PRIM.
PAGE 12
CCZ191/CCZ191comb.QX33 4/6/99 6:42 PM Page 12 12 Setting the Clock There are three ways to set the clock: Manually, with Automatic PBS Channel Selection, or with Manual PBS Channel Selection. With manual clock setting, you tell the TV/VCR the current time. With Automatic or Manual PBS Channel Selection, the TV/VCR gets the time from your local PBS station.
PAGE 13
CCZ191/CCZ191comb.QX33 4/6/99 6:42 PM Page 13 Setting the Clock (cont’d) 13 4 If ON appears beside AUTO CLOCK, press the F.FWD/ B button so that OFF appears to the right of AUTO CLOCK, then press the MENU button. If OFF appears beside AUTO CLOCK, press the MENU button. 5-6 SET MANUAL CLOCK TIME – – : – – SLEEP POWER DATE – – / – – / – – ALT.
PAGE 14
CCZ191/CCZ191comb.QX33 4/6/99 6:42 PM Page 14 14 Setting the Clock (cont’d) Automatic PBS Channel Selection 1 Press the MENU button. > PRIM. SETUP VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS 2-3 PRESS B SLEEP POWER ALT.CH 2 1 2 3 4 5 6 o CHANNEL 7 Press the PLAY/▲ button or the STOP/▼ button to select PRIM. SETUP. Then, press the F.FWD/ B button.
PAGE 15
CCZ191/CCZ191comb.QX33 4/6/99 6:42 PM Page 15 Setting the Clock (cont’d) 15 5 Press the PLAY/▲ button or the STOP/▼ button to select SET PBS CH. AUTO. Then, press the F.FWD/ B button. 6 Wait for the TV/VCR to find the time. SET AUTO CLOCK TIME ––:–– DATE ––/––/–– SLEEP POWER ALT.CH NOW SEARCHING TO END PRESS EXIT 1 2 3 4 5 6 7 8 9 0 +100 o MUTE VOLUME o CHANNEL 6 SPEED 7 p o o PLAY REW F.FWD o NOW SEARCHING flashes on the TV/VCR screen.
PAGE 16
CCZ191/CCZ191comb.QX33 4/6/99 6:42 PM Page 16 16 Setting the Clock (cont’d) Manual PBS Channel Selection 1 Press the MENU button. > PRIM. SETUP VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS PRESS B 2-3 SLEEP POWER ALT.
PAGE 17
CCZ191/CCZ191comb.QX33 4/6/99 6:42 PM Page 17 Setting the Clock (cont’d) 17 5 Press the PLAY/▲ button or the STOP/▼ button to select SET PBS CH. MANUAL. Then, press the F.FWD/ B button. 7 Wait for the TV/VCR to find the time. AUTO CLOCK (PBS) CH – – TIME ––:–– DATE ––/––/–– SLEEP POWER ALT.CH SELECT CHANNEL NUMBER TO END PRESS EXIT 6 6 1 2 3 4 5 6 7 8 9 0 +100 o MUTE VOLUME SPEED Use the Number buttons to select your PBS station.
PAGE 18
CCZ191/CCZ191comb.QX33 4/6/99 6:42 PM Page 18 18 Daylight-Saving Time When the Daylight-Saving Time feature is ON, the TV/VCR clock will automatically move forward one hour on the first Sunday in April and move back one hour on the last Sunday in October. To turn Daylight-Saving Time ON or OFF, follow the steps below. 2-4 1 Press the MENU button. SLEEP POWER ALT.CH > PRIM.
PAGE 19
CCZ191/CCZ191comb.QX33 4/6/99 6:42 PM Page 19 Time Zone 19 When you set the clock using AUTO CLOCK, specify a time zone in which a local PBS channel is located. The TV/VCR will maintain the clock according to your time zone. 1 Press the MENU button. > PRIM. SETUP VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS 2-5 PRESS B SLEEP POWER ALT.CH 2 1 2 3 4 5 6 o CHANNEL 7 Press the PLAY/▲ button or the STOP/▼ button to select PRIM. SETUP. Then, press the F.FWD/ B button.
PAGE 20
CCZ191/CCZ191comb.QX33 4/6/99 6:42 PM Page 20 20 Front Panel Cassette Compartment Insert a video cassette tape here. Wireless Remote Sensor Receives a signal from your remote control so you can operate the TV/VCR from a distance. STOP/EJECT Button Press once to stop the tape. When playback is stopped, press to eject the tape. Press to select an item in the pop up menu. VIDEO Jack Connect this jack to the video out jack of a camcorder or a VCR. Details are on page 31.
PAGE 21
CCZ191/CCZ191comb.QX33 4/6/99 6:42 PM Page 21 Rear Panel 21 ANT. AC Power Cord Connect to a standard AC outlet to supply power to the TV/VCR. ANT(enna) Jack Connect your antenna or cable here. Details are on pages six - seven. Antenna Hole Connect the stem of an indoor antenna here. Details are on page six.
PAGE 22
CCZ191/CCZ191comb.QX33 4/6/99 6:42 PM Page 22 22 Remote Control Buttons SLEEP Button Press to set the sleep timer. Details are on page 37. POWER Button Press to turn on or off the TV/VCR. Number Buttons Use to select channels and to program TV/VCR functions (such as setting the clock). ● Channels 1 - 9 To select, press 0, then press the channel you want. For example, to select channel 7, press 0, 7.
PAGE 23
CCZ191/CCZ191comb.QX33 4/6/99 6:42 PM Page 23 Remote Control Buttons (cont’d) 23 ALT. CH (Alternate Channel) Button Press to return to the TV channel you were viewing immediately before switching to your current channel. CHANNEL ▲/▼ Buttons Press to scan through the TV/VCR’s channels. VOLUME ▲/▼ Buttons Press to adjust the sound level. If you press the VOLUME ▲/▼ buttons when the sound is muted, the sound will be restored. POWER MUTE Button Press to eliminate the TV/VCR’s sound.
PAGE 24
CCZ191/CCZ191comb.QX33 4/6/99 6:42 PM Page 24 24 Adjusting the Picture Controls Follow these steps to adjust the TV/VCR’s brightness, picture, color, tint, and sharpness. 1 Press the MENU button. TO ADJUST PRESS { / B SLEEP ALT.CH K Press the PLAY/▲ button or the STOP/▼ button to select the desired control (BRIGHTNESS, for example). Press the REW(ind)/{ button or the F.FWD/ B button to adjust the picture control. (Refer to the chart on page 25.
PAGE 25
CCZ191/CCZ191comb.QX33 4/6/99 6:42 PM Page 25 Adjusting the Picture Controls (cont’d) 25 Decrease decreased brightness decreased contrast paler more purple softer BRIGHTNESS PICTURE COLOR TINT SHARPNESS Increase increased brightness increased contrast more brilliant more green clearer Press the REW(ind)/{ button to decrease a picture control. Press the F.FWD/ B button to increase a picture control. AUDIO VIDEO STOP/EJECT REW PLAY F.
PAGE 26
CCZ191/CCZ191comb.QX33 4/6/99 6:42 PM Page 26 26 On-Screen Status Displays A status display will appear when you press the STATUS/EXIT button or certain function buttons. The contents of the status display will vary. To choose the status display mode, follow the steps below. If you select STATUS ON, then select COUNTER ONLY OFF: ● Whenever you press the STOP/▼ button or the PLAY/▲ button, the status display will appear for five seconds.
PAGE 27
CCZ191/CCZ191comb.QX33 4/6/99 6:42 PM Page 27 Reminder 27 The channel number will remain on-screen at all times when you set REMINDER to ON in the pop up menu. The exception is during tape playback, Forward and Reverse Searching and Still modes, and when closed captioning is selected (CAPTION in the pop up menu). Set REMINDER to ON or OFF by following the steps below. 1 SLEEP POWER ALT.CH Press the MENU button.
PAGE 28
CCZ191/CCZ191comb.QX33 4/6/99 6:42 PM Page 28 28 Playing Follow the steps below to play a tape. 1 Insert a tape in the TV/VCR. The power will come on. If the tape’s record tab has been removed, playback should start automatically. 1 5 Insert a tape in the TV/VCR. Press the STOP/EJECT button on the TV/VCR. 2 ALT.CH If playback does not start automatically, press the PLAY/▲ button to start playback. Press the REW(ind)/{ button to rewind the tape.
PAGE 29
CCZ191/CCZ191comb.QX33 4/6/99 6:42 PM Page 29 Recording 29 Read and follow the steps below to record a TV program. 1 Place a tape with its record tab intact (see page five) in the TV/VCR. The power will come on. Or, if the tape is already in the TV/VCR, press the POWER button. Press the SPEED button until the desired tape speed appears on the TV/VCR screen. Details about tape speed are given below. 3 4 Press the REC(ord)/OTR button once to start recording. The RECORD light will glow.
PAGE 30
CCZ191/CCZ191comb.QX33 4/6/99 6:42 PM Page 30 30 One-Touch Recording The One-Touch Recording (OTR) function allows you to program an immediate timed recording from 30 minutes to eight hours long without setting the timer. Before you begin, make sure: ● Channels are set up. ● There is a tape in the TV/VCR. The record tab must be intact. 4 Press the STOP/EJECT button on the TV/VCR to stop the OTR. 1 2 ALT.CH 1 2 3 4 5 6 7 8 9 p 0 +100 o MUTE VOLUME o CHANNEL 2 SPEED p PLAY REW F.
PAGE 31
CCZ191/CCZ191comb.QX33 4/6/99 6:42 PM Page 31 Rerecording (Tape Duplication) 31 AUDIO and VIDEO OUT Jacks on source unit (VCR or Camcorder) AUDIO VIDEO STOP/EJECT IN REW EARPHONE VIDEO AUDIO OUT Audio Cable (white) from AUDIO OUT to AUDIO Video Cable (yellow) from VIDEO OUT to VIDEO AUDIO and VIDEO Jacks on TV/VCR 1 Make the connections shown above, using audio and video cables. (Make sure the source unit is connected to a power source.
PAGE 32
CCZ191/CCZ191comb.QX33 4/6/99 6:42 PM Page 32 32 Timer Recording Follow the steps below to program the TV/VCR to record TV programs while you’re away from home. The TV/VCR will turn itself on, record, and turn itself off automatically. Before you begin, make sure: ● The clock is set. If not, CLOCK MUST BE SET appears. ● Channels are set up. ● There is a tape in the TV/VCR. (Make sure the tape’s record tab is intact and the tape is long enough to record the program.) 2-3 SLEEP POWER ALT.
PAGE 33
CCZ191/CCZ191comb.QX33 4/6/99 6:42 PM Page 33 Timer Recording (cont’d) 33 4 Use the Number buttons (1 - 8) to select a position in which to store the timer recording. Flashing numbers indicate an open position (one in which a timer recording has not yet been stored). NOTE: If you select a number that has already been used to store a timer recording, PREVIOUSLY SET PROGRAM will appear on-screen for a few seconds. Then information about the program in that position will appear on-screen.
PAGE 34
CCZ191/CCZ191comb.QX33 4/6/99 6:42 PM Page 34 34 Timer Recording (cont’d) 8 Press the Number 1 button to record in SP speed, press the Number 2 button to record in LP speed, or press the Number 3 button to record in SLP speed. Details about tape speed are on page 29. You cannot use the SPEED button at this time. ONE TIME PROGRAM PROGRAM 1 CHANNEL 10 TIME ON 09:30 PM TIME OFF 11:00 PM REC SPEED SLP SP=1 LP=2 SLP=3 11 8 SLEEP POWER ALT.
PAGE 35
CCZ191/CCZ191comb.QX33 4/6/99 6:42 PM Page 35 Timer Recording (cont’d) 35 Checking or Clearing Timer Recordings 1 2 With the TV/VCR on, press the MENU button. 2-3 ALT.CH Press the PLAY/▲ button or the STOP/▼ button to select VCR PROGRAM, then press the F.FWD/ B button. Press the F.FWD/ B button to display information about the next programmed timer recording. (If you do not press a button within 10 seconds, information about the next programmed timer recording will appear.
PAGE 36
CCZ191/CCZ191comb.QX33 4/6/99 6:42 PM Page 36 36 Defeat Recording Follow the steps below to prevent accidental recording. 1 Press the MENU button. > PRIM. SETUP 2-3 PRESS B SLEEP POWER VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS ALT.CH 1 2 3 4 5 6 o CHANNEL 2 7 8 9 0 +100 o MUTE VOLUME SPEED Press the PLAY/▲ button or the STOP/▼ button to select VCR SETUP, then press the F.FWD/ B button. p p o REW F.
PAGE 37
CCZ191/CCZ191comb.QX33 4/6/99 6:42 PM Page 37 Setting the Sleep Timer 37 Use the sleep timer to program the TV/VCR to shut off in a certain amount of time. 1 Press the SLEEP button. The sleep timer display will appear on-screen. (You can not set the sleep timer during a recording.) 1-2 SLEEP POWER ALT.CH SLEEP 0 1 2 3 4 5 6 7 8 9 0 +100 o MUTE VOLUME MIN o CHANNEL 2 p o o PLAY REW F.
PAGE 38
CCZ191/CCZ191comb.QX33 4/6/99 6:42 PM Page 38 38 Closed Caption When you watch a program that is being broadcast with closed captions, you can access on-screen boxes containing the program’s dialogue (for example, what a character is saying), dialogue in a foreign language, or information (such as a channel guide, schedule, or announcements). Follow the steps below to select closed captions. Not all TV programs and commercials are broadcast with closed captions.
PAGE 39
CCZ191/CCZ191comb.QX33 4/6/99 6:42 PM Page 39 Closed Caption (cont’d) 39 4 Press the STATUS/EXIT button. The type of closed captions you selected at step 3 will appear on-screen. SLEEP POWER ALT.CH 1 2 3 4 5 6 o CHANNEL 7 HELLO 8 9 0 +100 o MUTE VOLUME SPEED p p o Standard Closed Captions REW F.
PAGE 40
CCZ191/CCZ191comb.QX33 4/6/99 6:42 PM Page 40 40 Volume Bar Usually, the volume bar appears when you press the VOLUME ▲/▼ buttons. If you do not need it, set the VOLUME BAR to OFF position. For example, when you watch a program that is being broadcast with closed captions, you may choose to set the VOLUME BAR to OFF so the captions can remain on-screen. The captions will remain on-screen even when you press the VOLUME ▲/▼ buttons or the MUTE button. SLEEP POWER 1 ALT.CH Press the MENU button.
PAGE 41
CCZ191/CCZ191comb.QX33 4/6/99 6:42 PM Page 41 Repeat Play 41 Follow the steps below to program the TV/VCR to play a tape over and over. 1 2-3 Press the MENU button. SLEEP POWER ALT.CH > PRIM. SETUP PRESS B VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS 1 2 3 4 5 6 7 8 9 0 +100 o MUTE VOLUME o CHANNEL SPEED p p 2 o Press the PLAY/▲ button or the STOP/▼ button to select VCR SETUP, then press the F.FWD/ B button. F.
PAGE 42
CCZ191/CCZ191comb.QX33 4/6/99 6:42 PM Page 42 42 A - B Repeat Play Follow the steps below to program the TV/VCR to play the material between two specified points (A and B) on a tape over and over again. 1 Insert a tape in the TV/VCR. 1 2 Insert a tape in the TV/VCR. SLEEP POWER ALT.CH Press the MENU button. PRESS B 3 4 5 6 7 8 9 0 +100 o MUTE VOLUME o 3-4 SPEED p p o PLAY REW F.FWD o VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS 2 CHANNEL o > PRIM.
PAGE 43
CCZ191/CCZ191comb.QX33 4/6/99 6:42 PM Page 43 A - B Repeat Play (cont’d) 43 6 Press the STATUS/EXIT button to remove the display. AB REPEAT will appear on-screen. Beneath it, the letter A will flash beside the real-time counter. SLEEP POWER . ALT.CH 1 2 3 4 5 6 o CHANNEL A 7 A-B REPEAT 0:12:34 7 8 9 0 +100 o MUTE VOLUME SPEED p p o o PLAY REW F.FWD STOP p REC/OTR MEMORY PAUSE/STILL o MENU STATUS/EXIT CLEAR TRACKING p .
PAGE 44
CCZ191/CCZ191comb.QX33 4/6/99 6:42 PM Page 44 44 Real-Time Counter Memory Follow the steps below to reset the real-time counter to zero at a tape location you want to refer to later. 1 Play, fast forward, or rewind a tape to the location that you would like to refer to later. Stop the tape. SLEEP POWER 2 ALT.CH Press the STATUS/EXIT button. The real-time counter will appear on-screen.
PAGE 45
CCZ191/CCZ191comb.QX33 4/6/99 6:42 PM Page 45 Automatic Operation Features 45 The following playback features will always operate. Automatic Playback When you put a tape in the TV/VCR, the power will come on automatically. If the tape’s record tab is missing, playback will begin. If a timer recording is set, the power will not come on automatically when you insert a tape with the record tab intact.
PAGE 46
CCZ191/CCZ191comb.QX33 4/6/99 6:42 PM Page 46 46 Playback Options Forward and Reverse Searching (SP/LP/SLP) 1 During tape playback, press and release the F.FWD/ B button or the REW(ind)/{ button. A fast forward or reverse picture search will begin. SLEEP POWER ALT.CH 2 1 2 3 4 5 6 7 To return to normal playback, press the PLAY/▲ button. 8 9 0 +100 o MUTE VOLUME SPEED o o PLAY REW F.FWD o During tape playback, press the F.
PAGE 47
CCZ191/CCZ191comb.QX33 4/6/99 6:42 PM Page 47 Specifications / Glossary 47 Specifications Glossary General CRT: 19-inch in line gun Television system: NTSC-M Closed caption system: Section 15.119, FCC (Federal Communications Commission) Standard Video Heads: Two heads Tape width: 1/2 inch (12.65 mm) Tape speed SP: 33.35 mm/sec. LP: 16.67 mm/sec. SLP: 11.12 mm/sec.
PAGE 48
CCZ191/CCZ191comb.QX33 4/6/99 6:42 PM Page 48 48 Helpful Hints If you are having problems with your product, check this list of problems and possible solutions before requesting service. You may be able to solve the problem yourself. If you need to call a customer service representative, please know the model number and serial number of your product before you call. This information is displayed on the back of the product.
PAGE 49
CCZ191/CCZ191comb.QX33 4/6/99 6:42 PM Page 49 Helpful Hints (cont’d) 49 The remote control is not available, or the remote control will not access the pop up menu. • Use the buttons on the front panel of the TV/VCR to access the pop up menu (page 20). You can not enter numbers (for example, to program a timer recording) using the front panel buttons. TV/VCR has no power. • Make sure the power plug is completely connected to an AC (alternating current) outlet. TV/VCR power shuts off after 15 minutes.
PAGE 50
CCZ191/CCZ191comb.QX33 4/6/99 6:42 PM Page 50 50 Limited Warranty TV/VCR COMBINATION 90 Days Free Labor/One Year Free Parts Exchange (Two Years Free Exchange on Color Picture Tube) This product must be carried in for repair. WHO IS COVERED? You must have proof of purchase to receive warranty service. A sales receipt or other document showing that you purchased the product is considered proof of purchase. WHAT IS COVERED? Warranty coverage begins the day you buy your product.
PAGE 51
CCZ191/CCZ191comb.QX33 4/6/99 6:42 PM Page 51 Index 51 a-b repeat play . . . . . . . .42 - 43 accessories . . . . . . . . . . . . . . .52 ant(enna) jack . . . . . . . . . . .6, 21 audio jack . . . . . . . . . . .7, 20, 31 automatic playback . . . . . . . . . . . . . . .45 rewind . . . . . . . . . . . . . . . .45 menu button . . . . . . . . . . . . . . . .22 front panel button access . .20 mute button . . . . . . . . . . . . . .23 number buttons . . . . . . . . . . .22 one-touch recording . . . . . . . .
PAGE 52
SUPPLIED ACCESSORIES CCZ191/CCZ191comb.QX33 4/6/99 6:42 PM Page 52 Check to be sure the items on this page are packed with your TV/VCR. These accessories are provided to help you use or set up your TV/VCR. Lighted Remote Control for CCZ191 (4835 218 37228) Remote Control for CCZ192 (4835 218 37216) Two AA Batteries (4835 138 17012) If any of these items are not included, or if you need to replace an item, contact Philips Service Solutions Group at the address below. Philips Service Solutions Group P.