Color TV with built-in VCR CCZ132AT CCW135AT Owner’s Manual Important! Return your Warranty Registration Card within 10 days. See why inside. AUDIO EARPHONE VIDEO STOP/EJECT REW PLAY F.
Return your Warranty Registration card today to ensure you receive all the benefits you’re entitled to. Once your PHILIPS MAGNAVOX purchase is registered, you’re eligible to receive all the privileges of owning a PHILIPS MAGNAVOX product. So complete and return the Warranty Registration Card enclosed with your purchase at once. And take advantage of these important benefits.
Introduction 3 Welcome to your TV/VCR owner’s manual. This manual has six sections: Setting Up Your TV/VCR; Description of Controls; Basic Operations; Recording Options; Playing Options; and Information You May Need. The instructions explain all of the TV/VCR’s features, which are listed below.
Table of Contents Setting Up Your TV/VCR Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Before Using the TV/VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Hooking Up the TV/VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Before Using the TV/VCR 5 Putting Batteries in the Remote Control 1 1 2 2 3 3 Remove the battery compartment lid on the bottom of the remote control by sliding it in the direction of the arrow. Place two AA batteries inside the battery compartment with their + and – ends aligned as indicated. Replace the battery compartment lid. Removing the Shipping Card ● A shipping card may be inserted in the cassette compartment of the TV/VCR. Before you insert a cassette tape, remove the shipping card.
Hooking Up The TV/VCR 1 Hook up your TV/VCR using one of the connections shown. A. Hooking Up Your TV/VCR With a Cable Signal or Outdoor Antenna Connect a Cable signal or an antenna to the ANT(enna) Jack. ANT. ANT. B. Hooking Up Your TV/VCR With a Cable Box To view any channel, set the TV/VCR to the Cable Box output channel (channel 03 or 04). Then, select channels at the Cable Box. Connect the Cable signal to the IN Jack on the Cable Box.
Hooking Up The TV/VCR (cont’d) 7 D. Hooking Up Your TV/VCR to Another Video Source (VCR or Camcorder) You may need this connection if you want to copy tapes. Details are on page 31. AUDIO/VIDEO OUT Jacks on VCR 3CH 4CH AUDIO VIDEO OUT IN Use an Audio cable to connect the AUDIO OUT Jack on the VCR to the AUDIO Jack on the front of the TV/VCR. IN ANT. OUT AUDIO VIDEO AUDIO EARPHONE 3CH 4CH AUDIO VIDEO OUT IN VIDEO STOP/EJECT REW PLAY F.
Using the Swivel Base (CCW135 only) Caution: Always place the swivel base on a flat surface. 1 Carefully place the TV/VCR upside down and attach the assembled swivel base to the bottom of the TV/VCR as shown. 2 Tighten the screws (supplied) into the holes marked by the arrows. 3 Place the TV/VCR upright. You now can rotate the TV/VCR in either direction.
Turning On the TV/VCR 9 Before you turn on the TV/VCR, make sure there are batteries in the remote control and the TV/VCR is hooked up correctly. The instructions on this page work only when you turn on the TV/VCR for the first time. 1 1 SLEEP POWER ALT.CH Press the POWER button. The TV/VCR will come on and the screen shown below will appear. 1 2 3 4 5 6 7 SELECT LANGUAGE 8 9 0 +100 o MUTE VOLUME SPEED ON ESPAÑOL 2 o PLAY REW F.
Language Selection Follow the steps below to change the language of the on-screen displays. 1 2-4 Press the MENU button. PRESS B > PRIM. SETUP VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS SLEEP POWER ALT.CH 2 1 2 3 4 5 6 7 8 9 0 +100 o MUTE VOLUME o CHANNEL Press the PLAY/▲ button or the STOP/▼ button to select PRIM. SETUP. Then, press the F.FWD/B button.
Automatic Channel Setup 11 Although the TV/VCR may automatically memorize the channels you receive when you turn it on for the first time, you may set up channels again by following the steps below. 1 Press the MENU button. Wait for the TV/VCR to set up channels. 5 2&4 TO ADJUST PRESS { / B > INPUT CABLE SLEEP POWER EXIT PRIM. SETUP VCR PROGRAM VCR SETUP CAPTION ALT.
Automatic Channel Setup (cont’d) Adding/Deleting Channels 1 3 Press the MENU button. SLEEP POWER TO ADJUST PRESS { / B CH123 SAVED > CHANNEL INPUT EXIT PRIM. SETUP VCR PROGRAM VCR SETUP 3 4 5 6 o CHANNEL 7 2 8 9 0 +100 o MUTE VOLUME SPEED p p o PLAY o Press the PLAY/▲ button or the STOP/▼ button to select CHANNEL, then press the F.FWD/B button. 2 REW F.FWD o 2 ALT.CH 1 STOP p TO ADJUST PRESS { / B CH123 SAVED > CHANNEL INPUT EXIT PRIM.
Setting the Clock 13 There are three ways to set the clock: Manually, with Automatic PBS Channel Selection, or with Manual PBS Channel Selection. With manual clock setting, you tell the TV/VCR the current time. With Automatic or Manual PBS Channel Selection, the TV/VCR gets the time from your local PBS station. If you use either Manual PBS Channel Selection or Automatic PBS Channel Selection, follow the steps on page 20 to have the TV/VCR maintain the clock according to your Time Zone.
Setting the Clock (cont’d) 4 If ON appears beside AUTO CLOCK, press the F.FWD/B button so that OFF appears to the right of AUTO CLOCK, then press the MENU button. If OFF appears beside AUTO CLOCK, press the MENU button. 5-6 SET MANUAL CLOCK TIME – – : – – SLEEP POWER DATE – – / – – / – – ALT.
Setting the Clock (cont’d) 15 Automatic PBS Channel Selection 1 Press the MENU button. > PRIM. SETUP VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS 2-3 PRESS B SLEEP POWER ALT.CH 2 1 2 3 4 5 6 7 8 9 0 +100 o MUTE VOLUME o CHANNEL Press the PLAY/▲ button or the STOP/▼ button to select PRIM. SETUP. Then, press the F.FWD/B button. SPEED p p o PRIMARY SETUP > SELECT LANGUAGE AUTO PROGRAMMING CH MEMORY REVIEW VOLUME BAR [ON] SET CLOCK F.
Setting the Clock (cont’d) 5 Press the PLAY/▲ button or the STOP/▼ button to select SET PBS CH. AUTO. Then, press the F.FWD/B button. 6 Wait for the TV/VCR to find the time. SET AUTO CLOCK TIME ––:–– DATE ––/––/–– SLEEP POWER NOW SEARCHING ALT.CH 1 2 3 4 5 6 7 8 9 0 +100 o MUTE VOLUME TO END PRESS EXIT 6 o CHANNEL 7 SPEED p o o PLAY REW F.FWD o NOW SEARCHING flashes on the TV/VCR screen.
Setting the Clock (cont’d) 17 Manual PBS Channel Selection 1 Press the MENU button. > PRIM. SETUP VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS 2-3 PRESS B SLEEP POWER ALT.CH 2 1 2 3 4 5 6 7 8 9 0 +100 o MUTE VOLUME o CHANNEL Press the PLAY/▲ button or the STOP/▼ button to select PRIM. SETUP. Then, press the F.FWD/B button. SPEED p p o PRIMARY SETUP > SELECT LANGUAGE AUTO PROGRAMMING CH MEMORY REVIEW VOLUME BAR [ON] SET CLOCK F.
Setting the Clock (cont’d) 5 Press the PLAY/▲ button or the STOP/▼ button to select SET PBS CH. MANUAL. Then, press the F.FWD/B button. 7 Wait for the TV/VCR to find the time. AUTO CLOCK (PBS) CH – – TIME ––:–– DATE ––/––/–– SELECT CHANNEL NUMBER TO END PRESS EXIT Use the Number buttons to select your PBS station. If you make a mistake, press the CLEAR button, then enter the correct number. ALT.
Daylight-Saving Time 19 When the Daylight-Saving Time feature is ON, the TV/VCR clock will automatically move forward one hour on the first Sunday in April and move back one hour on the last Sunday in October. To turn Daylight-Saving Time ON or OFF, follow the steps below. 1 2-4 Press the MENU button. SLEEP POWER ALT.CH > PRIM.
Time Zone When you set the clock using AUTO CLOCK, specify a time zone in which a local PBS channel is located. The TV/VCR will maintain the clock according to your time zone. 1 2-5 Press the MENU button. > PRIM. SETUP VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS PRESS B SLEEP POWER ALT.CH 2 1 2 3 4 5 6 7 8 9 0 +100 o MUTE VOLUME o CHANNEL Press the PLAY/▲ button or the STOP/▼ button to select PRIM. SETUP. Then, press the F.FWD/B button.
Front Panel 21 Cassette Compartment Insert a video cassette tape here. Wireless Remote Sensor Receives a signal from your remote control so you can operate the TV/VCR from a distance. STOP/EJECT Button Press once to stop the tape. When playback is stopped, press to eject the tape. Press to select an item in the pop up menu. VIDEO Jack Connect this jack to the video out jack of a camcorder or a VCR. Details are on page 31. AUDIO Jack Connect this jack to the audio out jack of a camcorder or a VCR.
Rear Panel ANT. AC Power Cord Connect to a standard AC outlet to supply power to the TV/VCR. ANT(enna) Jack Connect your antenna or cable here. Details are on pages six - seven. Antenna Hole Connect the stem of an indoor antenna here. Details are on page six.
Remote Control Buttons 23 SLEEP Button Press to set the sleep timer. Details are on page 37. POWER Button Press to turn on or off the TV/VCR. Number Buttons Use to select channels and to program TV/VCR functions (such as setting the clock). ● Channels 1 - 9 To select, press 0, then press the channel you want. For example, to select channel 7, press 0, 7. ● Channels 100 and above To select, press the +100 button, then press the last two digits of the channel you want.
Remote Control Buttons (cont’d) ALT. CH (Alternate Channel) Button Press to return to the TV channel you were viewing immediately before switching to your current channel. CHANNEL o/p Buttons Press to scan through the TV/VCR’s channels. VOLUME o/p Buttons Press to adjust the sound level. If you press the VOLUME o/p buttons when the sound is muted, the sound will be restored. POWER MUTE Button Press to eliminate the TV/VCR’s sound. Press again to return to the previous volume level. F.
Adjusting the Picture Controls 25 Follow these steps to adjust the TV/VCR’s brightness, picture, color, tint, and sharpness. 1 Press the MENU button. SLEEP POWER K ALT.CH 1 2 3 4 5 6 7 8 9 0 +100 o MUTE VOLUME o CHANNEL 2 Press the PLAY/▲ button or the STOP/▼ button to select the desired control (BRIGHTNESS, for example). p p o PLAY REW F.
On-Screen Status Displays A status display will appear when you press the STATUS/EXIT button or certain function buttons. The contents of the status display will vary. To choose the status display mode, follow the steps below. If you select STATUS ON, then select COUNTER ONLY OFF: ● Whenever you press the STOP/p button or the PLAY/o button, the status display will appear for five seconds.
Reminder 27 The channel number will remain on-screen at all times when you set REMINDER to ON in the pop up menu. The exception is during tape playback, Forward and Reverse Searching and Still modes, and when closed captioning is selected (CAPTION in the pop up menu). Set REMINDER to ON or OFF by following the steps below. 1 SLEEP POWER ALT.CH Press the MENU button.
Playing Follow the steps below to play a tape. 1 Insert a tape in the TV/VCR. The power will come on. If the tape’s record tab has been removed, playback should start automatically. 1 5 Insert a tape in the TV/VCR. Press the STOP/EJECT button on the TV/VCR. 2 ALT.CH If playback does not start automatically, press the PLAY/▲ button to start playback. Press the REW(ind)/{ button to rewind the tape. 2 3 4 5 6 7 8 9 0 +100 o MUTE VOLUME o SPEED p p o o 4 PLAY REW F.
Recording 29 Read and follow the steps below to record a TV program. 1 Place a tape with its record tab intact (see page five) in the TV/VCR. The power will come on. Or, if the tape is already in the TV/VCR, press the POWER button. Press the SPEED button until the desired tape speed appears on the TV/VCR screen. Details about tape speed are given below. 3 4 Press the REC(ord)/OTR button once to start recording. The REC(ord) light will glow.
One-Touch Recording The One-Touch Recording (OTR) function allows you to program an immediate timed recording from 30 minutes to eight hours long without setting the timer. Before you begin, make sure: ● Channels are set up. ● There is a tape in the TV/VCR. The record tab must be intact. 4 Press the STOP/EJECT button on the TV/VCR to stop the OTR. 1 2 ALT.CH 1 2 3 4 5 6 7 8 9 p 0 +100 o MUTE VOLUME o CHANNEL 2 SPEED p PLAY REW F.
Rerecording (Tape Duplication) 31 AUDIO and VIDEO OUT Jacks on source unit (VCR or Camcorder) AUDIO VIDEO EARPHONE STOP/EJECT VIDEO AUDIO OUT IN Audio Cable (white) from AUDIO OUT to AUDIO Video Cable (yellow) from VIDEO OUT to VIDEO AUDIO and VIDEO Jacks on TV/VCR 1 Make the connections shown above, using audio and video cables. (Make sure the source unit is connected to a power source.) 2 The source unit (VCR or camcorder) will play your tape. Insert a prerecorded tape in the source unit.
Timer Recording Follow the steps below to program the TV/VCR to record TV programs while you’re away from home. The TV/VCR will turn itself on, record, and turn itself off automatically. Before you begin, make sure: ● The clock is set. If not, CLOCK MUST BE SET appears. ● Channels are set up. ● There is a tape in the TV/VCR. (Make sure the tape’s record tab is intact and the tape is long enough to record the program.) 2-3 SLEEP POWER ALT.
Timer Recording (cont’d) 33 4 Use the Number buttons (1 - 8) to select a position in which to store the timer recording. Flashing numbers indicate an open position (one in which a timer recording has not yet been stored). NOTE: If you select a number that has already been used to store a timer recording, PREVIOUSLY SET PROGRAM will appear on-screen for a few seconds. Then information about the program in that position will appear on-screen. If this happens, press the STATUS/EXIT button.
Timer Recording (cont’d) 8 Press the Number 1 button to record in SP speed, press the Number 2 button to record in LP speed, or press the Number 3 button to record in SLP speed. Details about tape speed are on page 29. You cannot use the SPEED button at this time. 11 8 ONE TIME PROGRAM SLEEP POWER PROGRAM 1 CHANNEL 10 TIME ON 09:30 PM TIME OFF 11:00 PM REC SPEED SLP SP=1 LP=2 SLP=3 ALT.
Timer Recording (cont’d) 35 Checking or Clearing Timer Recordings 1 2 With the TV/VCR on, press the MENU button. 2-3 Press the PLAY/▲ button or the STOP/▼ button to select VCR PROGRAM, then press the F.FWD/B button. ALT.CH 3 5 To cancel the timer recording displayed, press the CLEAR button. Either the display will disappear or information about other timer recordings will appear. If you do not press any other buttons, the display will disappear after all timer recordings have been displayed.
Defeat Recording Follow the steps below to prevent accidental recording. 1 Press the MENU button. > PRIM. SETUP 2-3 PRESS B SLEEP POWER VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS ALT.CH 1 2 3 4 5 6 7 8 9 0 +100 o MUTE VOLUME o CHANNEL 2 SPEED Press the PLAY/▲ button or the STOP/▼ button to select VCR SETUP, then press the F.FWD/B button. p p o REW F.
Setting the Sleep Timer 37 Use the sleep timer to program the TV/VCR to shut off in a certain amount of time. 1 Press the SLEEP button. The sleep timer display will appear on-screen. (You can not set the sleep timer during a recording.) 1-2 SLEEP POWER ALT.CH SLEEP 0 MIN 1 2 3 4 5 6 7 8 9 0 +100 o MUTE VOLUME o CHANNEL 2 SPEED p o o PLAY REW F.FWD o Within five seconds, press the SLEEP button repeatedly to select 30 minutes, 60 minutes, 90 minutes, or 120 minutes.
Closed Caption When you watch a program that is being broadcast with closed captions, you can access on-screen boxes containing the program’s dialogue (for example, what a character is saying), dialogue in a foreign language, or information (such as a channel guide, schedule, or announcements). Follow the steps below to select closed captions. Not all TV programs and commercials are broadcast with closed captions. Similarly, all types of closed captions (second language, half-screen text, etc.
Closed Caption (cont’d) 39 4 Press the STATUS/EXIT button. The type of closed captions you selected at step 3 will appear on-screen. SLEEP POWER ALT.CH 1 2 3 4 5 6 7 8 9 0 +100 o MUTE VOLUME o CHANNEL SPEED HELLO p p o Standard Closed Captions F.
Volume Bar Usually, the volume bar appears when you press the VOLUME o/p buttons. If you do not need it, set the VOLUME BAR to OFF position. For example, when you watch a program that is being broadcast with closed captions, you may choose to set the VOLUME BAR to OFF so the captions can remain on-screen. The captions will remain on-screen even when you press the VOLUME o/p buttons or the MUTE button. 1 SLEEP POWER ALT.CH Press the MENU button.
Repeat Play 41 Follow the steps below to program the TV/VCR to play a tape over and over. 1 Press the MENU button. 2-3 SLEEP POWER > PRIM. SETUP PRESS B VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS ALT.CH 1 2 3 4 5 6 7 8 9 0 +100 o MUTE VOLUME o CHANNEL 2 SPEED p p Press the PLAY/▲ button or the STOP/▼ button to select VCR SETUP, then press the F.FWD/B button. o F.
A - B Repeat Play Follow the steps below to program the TV/VCR to play the material between two specified points (A and B) on a tape over and over again. 1 Insert a tape in the TV/VCR. 1 2 Insert a tape in the TV/VCR. SLEEP POWER ALT.CH Press the MENU button. 1 2 3 4 5 6 7 8 9 0 +100 o MUTE VOLUME o CHANNEL > PRIM. SETUP PRESS B 3-4 SPEED p o PLAY REW F.
A - B Repeat Play (cont’d) 43 6 Press the STATUS/EXIT button to remove the display. AB REPEAT will appear on-screen. Beneath it, the letter A will flash beside the real-time counter. . SLEEP POWER A ALT.CH A-B REPEAT 0:00:00 7 1 2 3 4 5 6 o CHANNEL 7 9 0 +100 o MUTE VOLUME SPEED p p o o PLAY REW F.FWD o Play, fast forward, or rewind the tape to the position at which you want to begin playback. Stop the tape, then press the MEMORY button to set the start position (A).
Real-Time Counter Memory Follow the steps below to reset the real-time counter to zero at a tape location you want to refer to later. 1 Play, fast forward, or rewind a tape to the location that you would like to refer to later. Stop the tape. 2 SLEEP POWER Press the STATUS/EXIT button. The real-time counter will appear on-screen. 01:08 PM CH10 ALT.CH 1 2 3 4 5 6 7 8 9 0 +100 o MUTE VOLUME o STOP CHANNEL SPEED p p SLP o 1 : 23 : 45 3 F.
Automatic Operation Features 45 The following playback features will always operate. Automatic Playback When you put a tape in the TV/VCR, the power will come on automatically. If the tape’s record tab is missing, playback will begin. If a timer recording is set, the power will not come on automatically when you insert a tape with the record tab intact. If a timer recording is set and the VCR power is off, the TV/VCR will eject the tape if the record tab is missing.
Playback Options Forward and Reverse Searching (SP/LP/SLP) 1 During tape playback, press and release the F.FWD/B button or the REW(ind)/{ button. A fast forward or reverse picture search will begin. SLEEP POWER 2 ALT.CH To return to normal playback, press the PLAY/▲ button. 1 2 3 4 5 6 7 8 9 0 +100 o MUTE VOLUME o CHANNEL Super High Speed Searching (LP/SLP) 1 p o o PLAY REW F.FWD o During tape playback, press the F.FWD/B button or the REW(ind)/{ button, then press again.
Specifications / Glossary 47 Specifications Glossary General CRT: 13-inch in line gun Television system: NTSC-M Closed caption system: Section 15.119, FCC (Federal Communications Commission) Standard Video Heads: Two heads Tape width: 1/2 inch (12.65 mm) Tape speed SP: 33.35 mm/sec. LP: 16.67 mm/sec. SLP: 11.12 mm/sec.
Helpful Hints If you are having problems with your product, check this list of problems and possible solutions before requesting service. You may be able to solve the problem yourself. If you need to call a customer service representative, please know the model number and serial number of your product before you call. This information is displayed on the back of the product. Also, please take a moment to identify the problem you are having, and be prepared to explain this to the representative.
Helpful Hints (cont’d) 49 The remote control is not available, or the remote control will not access the pop up menu. • Use the buttons on the front panel of the TV/VCR to access the pop up menu (page 21). You can not enter numbers (for example, to program a timer recording) using the front panel buttons. TV/VCR has no power. • Make sure the power plug is completely connected to an AC (alternating current) outlet. TV/VCR power shuts off after 15 minutes.
Limited Warranty TV/VCR COMBINATION 90 Days Free Labor/One Year Free Parts Exchange (Two Years Free Exchange on Color Picture Tube) This product must be carried in for repair. WHO IS COVERED? You must have proof of purchase to receive warranty service. A sales receipt or other document showing that you purchased the product is considered proof of purchase. WHAT IS COVERED? Warranty coverage begins the day you buy your product.
Index 51 a-b repeat play . . . . . . . .42 - 43 accessories . . . . . . . . . . . . . . .52 ant(enna) jack . . . . . . . . . . .6, 22 audio jack . . . . . . . . . . .7, 21, 31 automatic playback . . . . . . . . . . . . . . .45 rewind . . . . . . . . . . . . . . . .45 menu button . . . . . . . . . . . . . . . .23 front panel button access . .21 mute button . . . . . . . . . . . . . .24 number buttons . . . . . . . . . . .23 one-touch recording . . . . . . . .30 batteries . . . . . . . . . . . . . . . . . .
SUPPLIED ACCESSORIES Check to be sure the items on this page are packed with your TV/VCR. These accessories are provided to help you use or set up your TV/VCR.
