Software Upgrade

Introduction:

Philips strives to continually bring you the best experience from our products. To obtain the optimal

playback and latest features, you are highly recommended to upgrade the firmware of your device.

Preparation for firmware upgrade:

 A PC with an archive utility that supports the ZIP-format (e.g. WinZip for Windows).

 Your device with more than 15 Mb free spaces to hold the firmware file.

Upgrade Procedure:

Step 1: Check your current firmware version

1. Turn on the device.

2. Press and hold the LEFT button.

3. Press TWICE and hold the PLAYBACK.

4. Until you see the below screen, the highlighted red numbers is software version.

5. Compare the firmware version displayed to the latest version. If the existing firmware in your

player is of an earlier version than the new release, please proceed to Step 2.

Otherwise, the latest firmware is installed and hence an upgrade is not needed.

Step 2: Upgrade the firmware for your device

1. Download firmware.

Click on the Download icon in support page to download the new firmware package to your

computer.

2. Transfer firmware to your device.

NOTE: Ensure that the device battery icon has at least two grids to provide sufficient power

for the upgrade process

1. Check your current firmware

version

2. Upgrade the firmware for your

device

3. Confirm upgrade

successfulness

PAGE 1
Introduction: Philips strives to continually bring you the best experience from our products. To obtain the optimal playback and latest features, you are highly recommended to upgrade the firmware of your device. Preparation for firmware upgrade:   A PC with an archive utility that supports the ZIP-format (e.g. WinZip for Windows). Your device with more than 15 Mb free spaces to hold the firmware file. Upgrade Procedure: 1. Check your current firmware version 2.
PAGE 2
i. Connect the device to your PC. Your PC shall recognize it as two icons like drive “CAM150” and “CAM150 SD”. Note: Ensure the device has more than 15Mb free spaces at internal memory “CAM150”. ii. Charge up your device if it has less than two grids of battery levels iii. Copy the firmware such as Philips_CAM150.bin into the root directory of the internal memory “CAM150”. (the drive without “SD”) Note: DO NOT rename the bin file. iv. Disconnect your device from PC safety when the copy is finished. 3.