C240P4 www.philips.
Table of Contents 1. Important ...............................................1 1.1 1.2 1.3 1.4 1.5 Power adapter safety Information .......1 EMC information ..........................................2 Safety precautions and maintenance .6 Notational Descriptions ............................7 Disposal of product and packing material ...............................................................8 1.6 AntiMicrobial housing .................................9 2. Setting up the monitor .....................
1. Important Shutdown Procedure 1. Important We strongly recommended that you should shut down the system before you start to clean any single components. The monitor is intended for use with Medical Equipment to display alpha, numerical and graphical data. The subject equipment Philips monitor is powered by an external recognized AC/DC adaptor. (IEC/EN60601-1). Please follow the steps below.
1. Important 1.2 EMC information Guidance and manufacturer’s declaration – electromagnetic emissions – for all EQUIPMENT and SYTEMS 7KH PRQLWRU LV LQWHQGHG IRU XVH LQ WKH HOHFWURPDJQHWLF HQYLURQPHQW VSHFLÀHG EHORZ 7KH FXVWRPHU RU WKH XVHU RI the monitor should assure that it is used in such an environment.
1. Important Guidance and manufacturer’s declaration – electromagnetic immunity – for all EQUIPMENT and SYTEMS: 7KH PRQLWRU LV LQWHQGHG IRU XVH LQ WKH HOHFWURPDJQHWLF HQYLURQPHQW VSHFLÀHG EHORZ 7KH FXVWRPHU RU WKH XVHU RI the monitor should assure that it is used in such an environment.
1. Important Guidance and manufacturer’s declaration – electromagnetic immunity – for EQUIPMENT and SYSTEMS that are not LIFE-SUPPORTING: 7KH PRQLWRU LV LQWHQGHG IRU XVH LQ WKH HOHFWURPDJQHWLF HQYLURQPHQW VSHFLÀHG EHORZ 7KH FXVWRPHU RU WKH XVHU RI the monitor should assure that it is used in such an environment.
1. Important Recommended separation distances between portable and mobile RF communications equipment and the EQUIPMENT or SYSTEM – for EQUIPMENT and SYSTEMS that are not LIFE-SUPPORTING: The monitor is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled.
1. Important Do not knock or drop the monitor during operation or transportation. 1.3 Safety precautions and maintenance Maintenance Warnings We strongly recommended that you should shut down the system before you start to clean any single components. To protect your monitor from possible damage, do not put excessive pressure on the monitor panel. When moving your monitor, grasp the frame to lift; do not lift the monitor by placing your hand or fingers on the monitor panel.
1. Important Important information for Burn-in/Ghost image 1.4 Notational Descriptions The following subsections describe notational conventions used in this document. Always activate a moving screen saver program when you leave your monitor unattended. Always activate a periodic screen refresh application if your monitor will display unchanging static content.
1. Important help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please FRQWDFW \RXU ORFDO FLW\ RIÀFH \RXU KRXVHKROG waste disposal service or the shop where you purchased the product 1.
1. Important 1.6 AntiMicrobial housing Germs have become a growing problem in hospitals and clinical environments worldwide as they can cause life-threatening infections. Philips clinical review displaytake care of this challenge by using JIS z2801 compliant antimicrobial additive in its housing material making it an integral part of the display housing.
2. Setting up the monitor Install the base 2. Setting up the monitor 1. Place the monitor face down on a smooth surface. Pay attention not to scratch or damage the screen. 2.1 Installation Package contents C240P4 使用 前请阅读使用说明 in k l © 20 13 Kon 2. Snap in the base in the VESA mount area. User’s Manual Monitor drivers SmartControl software 保留备用 ijke P h il ip s ll r .A N .V ig h se AC/DC Adapter Audio cable na er s re io n ts rv ed .
2. Setting up the monitor Connecting to your PC 2.2 Operating the monitor Description of the control buttons 7 USB 8 6 5 4 3 2 1 3 4 9 5 2 6 1 Kensington anti-theft lock 2 Audio input 3 VGA input 4 DVI input 5 DisplayPort 3 6 AC-DC Adapter 7 USB downstream 8 USB upstream 7 6 9 Earphone jack 5 4 2 1 Switch monitor’s power ON and OFF. Connect to PC 1. Connect the power cord to the back of WKH PRQLWRU ÀUPO\ Access the OSD menu. &RQÀUP WKH 26' DGMXVWPHQW 2.
2. Setting up the monitor Description of the On Screen Display The OSD Menu Below is an overall view of the structure of the On-Screen Display. You can use this as a reference when you want to work your way around the different adjustments later on. What is On-Screen Display (OSD)? On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window.
2. Setting up the monitor Height adjustment 5HVROXWLRQ QRWLÀFDWLRQ This monitor is designed for optimal performance at its native resolution, 1920 × 1200 @ 60 Hz. When the monitor is powered on at a different resolution, an alert is displayed on screen: Use 1920 × 1200 @ 60 Hz for best results. 130mm Display of the native resolution alert can be switched off from Setup in the OSD (On Screen Display) menu.
2. Setting up the monitor Note This monitor accepts a 100mm x 100mm mounting interface. 2.3 Remove the Base Assembly for VESA Mounting Before you start disassembling the monitor base, please follow the instructions below to avoid any possible damage or injury. (Screw type: M4x10) 1. Place the monitor face down on a smooth surface. Pay attention not to scratch or damage the screen. 100mm 100mm 2. Remove the base assembly.
3. Image Optimization 3. Image Optimization 2. Keep pressing to toggle among Clinical D-Image, Text, sRGB image, Video, Standard, Off. 3.1 SmartImageCLINIC 3. The SmartImageCLINIC on screen display will remain on screen for 5 seconds, or you can DOVR SUHVV 2. WR PDNH FRQÀUPDWLRQ There are six modes to select: Clinical D-Image, Text, sRGB image, Video, Standard, Off.
3. Image Optimization at an affordable price point. For more information on DICOM please visit http:// medical.nema.org/ 3.2 Philips SmartControl Premium The new SmartControl Premium software by Philips allows you to control your monitor via an easy to use on-screen graphic interface. Complicated adjustments are a thing of the past as this user friendly software guides you through ÀQH WXQLQJ UHVROXWLRQ &RORU FDOLEUDWLRQ Clock/Phase adjustments, RGB White point adjustment, etc.
3. Image Optimization You can adjust more options without wizard by Standard pane. Start with Standard pane Adjust menu Adjust Menu allows you to adjust Brightness, Contrast, and Resolution. You can follow the instruction and do the adjustment. Cancel prompts user if you want to cancel installation.
3. Image Optimization Color menu Color Menu allows you to adjust RGB, Black Level, White Point, Calibration. You can follow the instruction and do the adjustment. Refer to below table for sub-menu item base on your input. Example for Color Calibration. 1. "Show Me" starts color calibration tutorial. 2. Start - starts the 6-step color calibration sequence. 3. Quick View loads the before/after images. 4. To return to Color home pane, click the &DQFHO button. 5.
3. Image Optimization First Color Calibration Screen Previous button is disabled until the second color screen. Next goes to the succeeding target (6-targets). Final next goes File > Presets pane. Cancel closes the UI and returns to the plug in page.
3. Image Optimization Options menu set to run at startup will not load when this box is unchecked (Disabled). 2SWLRQV!3UHIHUHQFHV - Will only be active when selecting Preferences from the dropdown Options menu. On a non-supported display capable of DDC/CI, only the Help and Options tabs are available. Enable transparency mode (Windows 7, Windows 8, Vista, XP). Default is 0% Opaque. 2SWLRQV!$XGLR - Will only be active when selecting Volume from the drop-down Options menu.
3. Image Optimization available. All other SmartControl Premium tabs are not available. After entering PIN, Accept button takes user to the pop-up dialog box on the following page. Minimum minutes set to 5. Slider set to 5 by default. Does not require the display be attached to a different host to go into Theft Deterrence mode. After creating PIN, the Theft Deterrence pane will indicate Theft Deterrence Enabled and provide PIN Options button: Theft Deterrence Enabled is displayed.
3. Image Optimization Task Tray Menu Enabled +HOS!9HUVLRQ - Will only be active when selecting Version from the drop- down Help menu. On a non-supported display capable of DDC/CI, only the Help and Options tabs are available. The task tray menu can be displayed by rightclicking on the SmartControl Premium icon from the task tray. Left Click will launch the application. 7KH WDVN WUD\ KDV ÀYH HQWULHV v +HOS - Access to User Manual file: Open User Manual file using the default browser window.
3. Image Optimization 3.3 SmartDesktop Guide SmartDesktop SmartDesktop is in SmartControl Premium. Install SmartControl Premium and select SmartDesktop from Options. Task Tray Menu Disabled When the Task Tray is disabled in the preference folder, only the Exit selection is available. To completely remove SmartControl Premium from the task tray, disable Run at Startup in Options>Preferences. Note All the illustrations in this section are for reference only.
3. Image Optimization Title Bar Options align. When the window and mouse cursor are within the region, the region will become highlighted. Desktop partition can be accessed from the title bar of the active window. This provides a quick and easy way to manage the desktop as well as sending any window to any partition without having to drag and drop. Move the cursor into the active window’s title bar to access the drop down menu.
3. Image Optimization ,GHQWLI\ 3DUWLWLRQ – Displays the outline grid on the desktop for the current partition. $OLJQ 2Q $OLJQ 2II – Enables/disables the drag and drop auto align feature. )LQG :LQGRZV – In some cases, the user may have sent multiple windows to the same partition. Find Windows will show all open windows and move the selected window to the forefront. ([LW – Closes Desktop Partition and Display Tune.
3. Image Optimization 6PDUW'HVNWRS 3DUWLWLRQ 'HÀQLWLRQV Name Description Full Desktop Applies all settings to the entire desktop. Image Vertical Assesses the screen resolution and divides the display into two evenly sized vertical regions. )RU PDLQWDLQ YHUWLFDO FRQÀJXUDWLRQ Horizontal Assesses the screen resolution and divides the display into two evenly sized horizontal regions.
3. Image Optimization Name Description Image Vertical Split Right Assesses the screen resolution and divides the display into two vertical regions, the right hand side is a single region, the left hand side is split into two evenly sized regions. For 90 Partition 1&2 on top Partition 3 on bottom.For 270 Partition 3 on top Partition 1&2 on bottom.
4. PowerSensor™ 4. PowerSensor™ Since some dark colored clothing tends to absorb infrared signals even when the user is within 100 cm or 40 inches of the display, step up signal strength when wearing black or other dark clothes. 4. How does it work? PowerSensor works on principle of transmission and reception of harmless “infrared” signals in order to detect userpresence.
7HFKQLFDO 6SHFLÀFDWLRQV 5. Technical Specifications Picture/Display Monitor Panel Type Backlight Panel Size Aspect Ratio Pixel Pitch Brightness Contrast Ratio (typ.
7HFKQLFDO 6SHFLÀFDWLRQV Heat Dissipation* Normal Operation Sleep (Standby) Off (AC switch) Power LED indicator Power Supply Dimension Product with stand (WxHxD) Product without stand (WxHxD) Weight Product with stand Product without stand Product with packaging AC Input Voltage AC Input Voltage AC Input Voltage at 100VAC , 50Hz at 115VAC , 60Hz at 230VAC , 50Hz 59.37 BTU/hr 59.37 BTU/hr 59.37 BTU/hr 1.37 BTU/hr 1.37 BTU/hr 1.
7HFKQLFDO 6SHFLÀFDWLRQV Note 1. EPEAT Gold or Silver is valid only where Philips registers the product. Please visit www.epeat.net for registration status in your country. 2. This data is subject to change without notice. Go to www.philips.
7HFKQLFDO 6SHFLÀFDWLRQV 5.1 Resolution & Preset Modes Maximum Resolution 1920 x 1200 @ 60 Hz (analog input) 1920 x 1200 @ 60 Hz (digital input) Recommended Resolution 1920 x 1200 @ 60 Hz (digital input) H. freq (kHz) Resolution V. freq (Hz) 31.47 720x400 70.09 31.47 640x480 59.94 35.00 640x480 66.67 37.86 640x480 72.81 37.50 640x480 75.00 37.88 800x600 60.32 46.88 800x600 75.00 48.36 1024x768 60.00 60.02 1024x768 75.03 44.77 1280x720 59.86 63.89 1280x1024 60.02 79.
6. Power Management 6. Power Management If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically.
7. Regulatory Infomation headsets) Acoustic performance – protection against sound spikes (headsets) and fan noise (projectors, computers) Ergonomically designed keyboard (notebooks) 7. Regulatory Information Congratulations! 7KLV SURGXFW LV 7&2 &HUWLÀHG IRU 6XVWDLQDEOH ,7 Electrical Safety, minimal electro-magnetic Emissions Third Party Testing All certified product models have been tested in an independent, accredited laboratory.
7. Regulatory Infomation Lead-free Product CE Declaration of Conformity Lead free display promotes environmentally sound recovery and disposal of waste from electrical and electronic equipment. Toxic substances like Lead has been eliminated and compliance with European community’s stringent RoHs directive mandating restrictions on hazardous substances in electrical and electronic equipment have been adhered to in order to make Philips monitors safe to use throughout its life cycle.
7. Regulatory Infomation Energy Star Declaration FCC Declaration of Conformity (www.energystar.gov) Declaration of Conformity for Products Marked with FCC Logo, ® As an ENERGY STAR Partner, we have determined that this product meets the ENERGY STAR® JXLGHOLQHV IRU HQHUJ\ HIÀFLHQF\ United States Only 1RWH We recommend you switch off the monitor when it is not in use for a long time. This device complies with Part 15 of the FCC Rules.
7. Regulatory Infomation Brancher l’équipement sur un autre circuit que celui utilisé par le récepteur. Demander l’aide du marchand ou d’un technicien chevronné en radio/télévision. 7RXWHV PRGLÀFDWLRQV Q D\DQW SDV UHoX l'approbation des services compétents en matière de conformité est susceptible d'interdire à l'utilisateur l'usage du présent équipement. N'utiliser que des câbles RF armés pour les connections avec des ordinateurs ou périphériques.
7. Regulatory Infomation Ergonomie Hinweis (nur Deutschland) Restriction on Hazardous Substances statement (India) Der von uns gelieferte Farbmonitor entspricht den in der "Verordnung über den Schutz vor Schäden durch Röntgenstrahlen" festgelegten Vorschriften. This product complies with the “India E-waste Rule 2011” and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.
7. Regulatory Infomation Information for U.K. only How to connect a plug The wires in the mains lead are coloured in accordance with the following code: WARNING - THIS APPLIANCE MUST BE EARTHED. BLUE -“NEUTRAL”(“N”) Important: BROWN -“LIVE”(“L”) This apparatus is supplied with an approved moulded 13A plug. To change a fuse in this type of plug proceed as follows: GREEN&YELLOW -“EARTH”(“E”) 1.
7.
8. Customer care and warranty black pixel. Other combinations of lit and dark sub pixels appear as single pixels of other colors. 8. Customer care and warranty Types of Pixel Defects Pixel and sub pixel defects appear on the screen in different ways. There are two categories of pixel defects and several types of sub pixel defects within each category. 8.1 Philips’ Flat Panel Monitors Pixel Defect Policy Philips strives to deliver the highest quality products.
8. Customer care and warranty Proximity of Pixel Defects Note A red or blue bright dot must be more than 50 percent brighter than neighboring dots while a green bright dot is 30 percent brighter than neighboring dots. Because pixel and sub pixels defects of the same type that are near to one another may be PRUH QRWLFHDEOH 3KLOLSV DOVR VSHFLÀHV WROHUDQFHV for the proximity of pixel defects. Black Dot Defects Black dot defects appear as pixels or sub pixels that are always dark or 'off'.
8. Customer care and warranty 8.2 Customer Care & Warranty For warranty coverage information and additional support requirement valid for your region, please visit www.philips.com/support website for details. You may also contact your local Philips Customer Care Center number listed below. Contact Information for WESTERN EUROPE region: &RXQWU\ &63 +RWOLQH 1XPEHU 3ULFH 2SHQLQJ +RXUV Austria RTS +43 0810 000206 € 0.07 Mon to Fri : 9am - 6pm Belgium Ecare +32 078 250851 € 0.
8. Customer care and warranty Contact Information for CENTRAL AND EASTERN EUROPE region: &RXQWU\ &DOO FHQWHU &63 &RQVXPHU FDUH QXPEHU Belarus NA IBA +375 17 217 3386 +375 17 217 3389 Bulgaria NA LAN Service +359 2 960 2360 Croatia NA MR Service Ltd +385 (01) 640 1111 Czech Rep.
8. Customer care and warranty Contact Information for APMEA region: &RXQWU\ Australia $63 AGOS NETWORK PTY LTD &RQVXPHU FDUH QXPEHU 2SHQLQJ KRXUV 1300 360 386 Mon.~Fri. 9:00am-5:30pm New Zealand Visual Group Ltd. 0800 657447 Mon.~Fri. 8:30am-5:30pm Hong Kong Macau Company: Smart Pixels Technology Ltd. Hong Kong: Tel: +852 2619 9639 Macau:Tel: (853)-0800-987 Mon.~Fri. 9:00am-6:00pm Sat. 9:00am-1:00pm India REDINGTON INDIA LTD Tel: 1 800 425 6396 SMS: PHILIPS to 56677 Mon.~Fri.
9. Troubleshooting & FAQs satisfactory, you can do manual adjustments via the OSD menu. 9. Troubleshooting & FAQs Note The Auto Function is not applicable in DVIDigital mode as it is not necessary. 9.1 Troubleshooting This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips customer service representative.
9. Troubleshooting & FAQs The "power on" light is too strong and is disturbing Eliminate the vertical bars using the Phase/ Clock of Setup in OSD Main Controls. It is valid only in VGA mode. You can adjust “power on” light using the power LED Setup in OSD main Controls. For further assistance, refer to the Consumer Information Centers list and contact Philips customer service representative. Image appears blurred, indistinct or too dark Adjust the contrast and brightness on On-Screen Display.
9. Troubleshooting & FAQs Q3. After installing SmartControl Premium, when clicking on SmartControl Premium tab, nothing shows up after a while or a failure message shows, what happened? 9.3 General FAQs Q1: When I install my monitor what should I do if the screen shows 'Cannot display this video mode'? It might be your graphic adaptor is not compatible with the SmartControl Premium.
9. Troubleshooting & FAQs Color Temperature: The six settings are 5000K, 6500K, 7500K, 8200K, 9300K and 11500K. With settings in the 5000K range the panel appears "warm, with a red-white color tone", while a 11500K temperature yields "cool, bluewhite toning". package. Monitor drivers (.inf and .icm ÀOHV ZLOO EH LQVWDOOHG DXWRPDWLFDOO\ Q4: How do I adjust the resolution? Ans.: Your video card/graphic driver and monitor together determine the available resolutions.
9. Troubleshooting & FAQs may cause "burn in", also known as "after-imaging" or "ghost imaging", on your screen. "Burn-in", "after-imaging", or "ghost imaging" is a well-known phenomenon in LCD panel technology. In most cases, the "burned in" or "atter-imaging" or "ghost imaging" will disappear gradually over a period of time after the power has been switched off. Always activate a moving screen saver program when you leave your monitor unattended.
© 2013 Koninklijke Philips N.V. All rights reserved. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V.
