Quick start guide

ManualsBrandsPhilips Manualsaudio & home theatreBTM630/12

What’s in the Box?

You should find these items upon opening the box.

Quick Start Guide

User Manual

Aux-in Cable MW antenna

FM antenna

Remote Control with

two AAA batteries

Quick Start Guide

User manual

Quick Start Guide

BTM630

AC power adaptor

8 X iPod dock adaptors

BTM630 QSG_12_Eng 2007.9.24, 16:261

Summary of content (4 pages)

PAGE 1
BTM630 Quick Start Guide What’s in the Box? You should find these items upon opening the box. 1 Aux-in Cable MW antenna FM antenna Remote Control with two AAA batteries 2 User Man ual Qu ick 1 St ar tG uid e AC power adaptor BTM630 QSG_12_Eng 8 X iPod dock adaptors 1 User manual Quick Start Guide 2007.9.
PAGE 2
Tips – See the User Manual for how to connect other equipment to this system. – Use the supplied AC power adaptor only! Using any other power connection device may damage your main set! 1 Connect the MW and FM antennas. 2 Connect the AC power adaptor of the system. FM wire antenna MW loop antenna 2 1 AC power adaptor Setting the clock 1 In standby mode, press PROG on the system (or PROG/CLOCK on the remote control). ➜ SET CLOCK is displayed briefly. Then, 12HR or 24HR is displayed.
PAGE 3
C Enjoy Playing a disc 1 Insert a disc into the disc loader. ➜ Make sure the label side is facing up. 2 In DISC mode, press ÉÅ to start playback. 3 To stop playback, press 9. Operating a Bluetooth-enabled device via the system 1 Place a Bluetooth-enabled device for pairing within 10 meters from the system. 2 Press SOURCE on the top of the system (or BLUETOOTH on the remote control) to select the Bluetooth source. 3 Press and hold ANSWER/PAIRING for more than 3 seconds.
PAGE 4
C Enjoy Programming and tuning to radio stations 1 Press SOURCE repeatedly (or TUNER on the remote control) to select the tuner source. 2 Press PROG on the system (or PROG/CLOCK on the remote control) for more than two seconds to program all available stations in order of waveband. 3 Press ALBUM•PRESET +/- on the system (or 3/4 on the remote control) until the desired preset station is displayed.