Always there to help you Register your product and get support at www.philips.
Contents 1 Important Safety 2 Your micro system Introduction What's in the box Overview of the main unit Overview of the remote control 3 Get started Place the speaker Connect FM antenna Connect power Prepare the remote control Set clock Turn on 4 Play Play from disc Play from USB Control play Skip to a track Program tracks Play from Bluetooth-enabled devices 2 2 3 3 3 4 5 7 7 7 7 8 8 8 8 Product information 16 9 Troubleshooting 18 10 Notice 20 14 14 14 15 Specifications USB playability i
1 Important Safety • • • • • • Make sure that there is enough free space around the product for ventilation. Only use attachments or accessories specified by the manufacturer. Battery usage CAUTION – To prevent battery leakage which may result in bodily injury, property damage, or damage to the product: • Install the battery correctly, + and - as marked on the product. • Remove the battery when the product is not used for a long time.
2 Your micro system Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Introduction With this unit, you can: • enjoy audio from discs, Bluetooth-enabled devices, USB storage devices, or other external devices; • listen to FM radio stations.
Overview of the main unit a b c d e f g h i j k l m n a • • Turn the unit on or off. Switch to standby mode or Eco standby mode. b SOURCE • Press to select a source: DISC, USB, TUNER, BT, AUDIO IN. c d • • /PAIRING Start, pause, or resume play. In Bluetooth mode, press and hold for 3 seconds to enter pairing mode. • Stop play or erase a program. e • USB socket. f Disc compartment g h • Open/close the disc compartment. • • • • / Skip to the previous/next track.
k FM ANT • FM antenna socket. l • a Headphone socket. c FM • Press to select the FM source. n DC IN 12V 2.5A • Power socket. d Overview of the remote control e a b r c q e p o n / Skip to the previous/next track. Search within a track/disc/USB. Tune to a radio station. Adjust time. • Play tracks randomly. f ALBUM/PRESET / • Select a preset radio station. • Skip to the previous/next album. g DISPLAY • Adjust display brightness. • During playback, display the play information.
o p • Stop play or erase a program. • Start, pause, or resume play. q USB/AUDIO IN • Press repeatedly to select the USB or AUDIO IN source. r 6 PAIRING Press to select the BT (Bluetooth) source. • In Bluetooth mode with one device connected, press and hold for 3 seconds to enter pairing mode. • In Bluetooth mode with two devices connected, press and hold for 3 seconds to disconnect the first connected device or the device without music playback and enter pairing mode.
3 Get started Caution Connect FM antenna • Connect the supplied antenna to this device before listening to the radio. •• Use of controls or adjustments or performance of procedures other than herein may result in hazardous laser exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the back of the apparatus.
Prepare the remote control Tip •• You can press CLOCK to view clock information in power-on mode. Caution •• Risk of product damage! When the remote control is not used for long periods, remove the battery. To insert the remote control battery: 1 2 3 Open the battery compartment. Insert the supplied AAA battery with correct polarity (+/-) as indicated. Turn on • Close the battery compartment. Press . »» The unit switches to the last selected source.
4 Play Play from disc Note •• Make sure that the disc contains playable audio content. 1 2 Press CD to select the DISC source. Insert a disc into the disc compartment with the printed side facing you. »» Play starts automatically. If not, press . Control play / / Play from USB Select a folder. Press to skip to the previous or next track. Press and hold to search backward/ forward within a track. Pause or resume play. Stop play. Play a track or all tracks repeatedly.
Program tracks You can program a maximum of 20 tracks. 1 2 3 4 5 Stop play, and then press PROG/SCAN to activate programming mode. For MP3 tracks, press ALBUM/PRESET to select an album. / Press / to select a track, and then press PROG/SCAN to confirm. Repeat steps 2-3 to program more tracks. Press to play the programmed tracks. • To erase the program, stop play, and then press .
3 4 Select 'Philips BTM2460' on your Bluetooth enabled device and if necessary input '0000' as the pairing password. »» After successful pairing and connection, the Bluetooth indicator turns solid blue, and the unit beeps. »» 'BT’ is displayed. Play music on the connected device. »» Music streams from your Bluetooth enabled device to this unit.
5 Listen to the radio Tip •• Position the antenna as far as possible from TV or other radiation sources. •• Make sure that you have connected the supplied FM antenna. •• For optimal reception, fully extend and adjust the position of the antenna. 2 1 2 3 Press FM to select the tuner source. 1 2 3 5 Press and hold / for 3 seconds. »» The radio tunes to a station with strong reception automatically. Repeat step 2 to tune to more stations.
6 Adjust sound The following operations are applicable to all supported media. Select a preset sound effect • Press SOUND repeatedly to select a preset sound effect. • DSC 1 (Powerful), DSC 2 (Balanced), DSC 3 (Warm), DSC 4 (Bright), DSC 5 (Clear) Adjust volume level • • On the remote control, press +/repeatedly. On the main unit, press VOL+/VOLrepeatedly. Mute sound • Press to mute or restore the sound.
7 Other features Set the alarm timer Set the sleep timer • This unit can be used as an alarm clock. You can select DISC, USB, or TUNER as the alarm source. Note •• Make sure that you have set the clock correctly. 1 2 3 4 In standby mode, press and hold SLEEP/ TIMER for three seconds. Press / repeatedly to select an alarm source (DISC, USB,or TUNER) Press SLEEP/TIMER to confirm. »» The hour digits begin to blink. Repeat steps 2-3 to set the hour, minute, and adjust volume of the alarm.
3 Start to play music on the connected device (see the device user manual). Listen through a headphone • Plug a headphone (not supplied) into the socket.
8 Product information USB Direct Version •• Product information is subject to change without prior notice. Specifications Amplifier 2 x 10 W 63 -20KHz, +/-3dB <1%(1 KHz) >72dBA 650mV RMS 22kohm Tuning Range Tuning grid Preset stations Sensitivity - Mono, 26 dB S/N Ratio - Stereo, 46 dB S/N Ratio Search Selectivity Total Harmonic Distortion Signal to Noise Ratio Audio DAC Total Harmonic Distortion Frequency Response S/N Ratio Semiconductor 12 cm CD-DA, CD-R, CD-RW, MP3-CD 24 Bits/44.
USB playability information Compatible USB devices: • USB flash memory (USB2.0 or USB1.1) • USB flash players (USB2.0 or USB1.
9 Troubleshooting Warning •• Never remove the casing of this unit. To keep the warranty valid, never try to repair the unit yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www. philips.com/support). When you contact Philips, make sure that the device is nearby and the model number and serial number are available.
The paired mobile device connects and disconnects constantly. •• The Bluetooth reception is poor. Move the device closer to this unit or remove any obstacle between them. •• Some mobile phones may connect and disconnect constantly when you make or end calls. This does not indicate any malfunction of this unit. •• For some devices, the Bluetooth connection may be deactivated automatically as a power-saving feature. This does not indicate any malfunction of this unit.
10 Notice Any changes or modifications made to this device that are not expressly approved by Gibson Innovations may void the user’s authority to operate the equipment. SIG, Inc. and any use of such marks by Gibson Innovations Limited is under license. Other trademarks and trade names are those of their respective owners. This apparatus includes this label: Disposal of your old product Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.
This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. BTM2460_11_UM_V3.
