Always there to help you Register your product and get support at www.philips.
Contents 1 Important Safety 2 2 2 Notice 3 3 Your micro system 4 4 4 5 6 4 Get started 7 7 7 7 7 8 8 Introduction What's in the box Overview of the main unit Overview of the remote control Connect speakers Connect power Demonstrate the features Prepare the remote control Set clock Turn on 5 Play 9 9 9 10 10 10 10 6 Listen to the radio 12 12 12 12 12 7 Other features 13 13 13 13 Play from disc Play from USB Control play Skip to a track Program tracks Play from Bluetooth-enabled devices Tune
1 Important Safety Safety Warning •• Never remove the casing of this apparatus. •• Never lubricate any part of this apparatus. •• Never look into the laser beam inside this apparatus. •• Never place this apparatus on other electrical equipment. •• Keep this apparatus away from direct sunlight, naked flames or heat. •• Ensure that you always have easy access to the power cord, plug or adaptor to disconnect the apparatus from the power. • • • • • 2 The device shall not exposed to dripping or splashing.
2 Notice Any changes or modifications made to this device that are not expressly approved by WOOX Innovations may void the user’s authority to operate the equipment. Hereby, WOOX Innovations declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.You can find the Declaration of Conformity on www.philips.com/support. Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.
3 Your micro system Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.
Overview of the main unit h a b c g d f M I C RO M U S I C S YS T E M B T M 2 3 3 5 e a • • Turn on the product. Switch to standby mode or Eco power standby mode. b Display panel • Show current status. c • • Connect USB storage devices. Charge your device. d AUDIO IN • Connect external audio devices. h SOURCE • Select a source: DISC, USB, TUNER, AUDIO IN, BT (Bluetooth). • Start, pause, or resume play. • Stop play or erase a program. / Skip to previous/next track.
f VOL +/• Adjust volume. Overview of the remote control g MUTE • Mute or restore volume. a b c FM CD r h SOUND • Enrich sound effect with Digital Sound Control (DSC). q i CLOCK • Set the clock. • View clock information. AUDIO IN PRESET/ALBUM d p e REPEAT f VOL g SHUFFLE MUTE DISPLAY SOUND CLOCK PROG TIMER h i SLEEP o n m l k j j SLEEP/TIMER • Set sleep timer. • Set alarm timer. k PROG • Program tracks. • Program radio stations. • Auto store FM radio stations.
4 Get started Caution •• Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the back of the apparatus. Write the numbers here: Model No. __________________________ Serial No.
To insert the remote control battery: 1 2 3 Open the battery compartment. Insert the supplied AAA battery with correct polarity (+/-) as indicated. Close the battery compartment. Turn on Press . »» The unit switches to the last selected source. Switch to standby mode Set clock 1 2 3 4 In standby mode, press and hold CLOCK on the remote control for more than two seconds. »» [24H] or [12H] hour format is displayed. Press / to select [24H] or [12H] hour format. press CLOCK to confirm.
2 5 Play Insert a USB device into the socket. »» Play starts automatically. If not, press . Play from disc 1 2 3 4 Press CD to select the CD source. Press to open the disc compartment. M I C RO M U S I C S Y S T E M B T M 2 3 3 5 Insert a disc with printed side facing upward. Press to close the disc compartment. »» Play starts automatically. If not, press .
Control play / / REPEAT SHUFFLE VOL +/MUTE SOUND DISPLAY Select a folder. Select an audio file. Pause or resume play. Stop play. Play a track or all tracks repeatedly. Play tracks randomly. Increase or decrease the volume. Mute or restore sound. Enrich sound effect with DSC: balanced, clear, powerful, warm, and bright. Adjust display brightness.
3 4 Select 'Philips BTM2335' on your Bluetooth enabled device and if necessary input '0000' as the pairing password. »» After successful pairing and connection, the Bluetooth indicator turns solid blue, and the unit beeps. Play audio on the connected device. »» Audio streams from your Bluetooth enabled device to this unit. Tip •• The unit can memorize up to 4 previously connected Bluetooth devices.
6 Listen to the radio Tune to a radio station Tip Program radio stations manually 1 2 3 •• Position the antenna as far as possible from TV, VCR, or other radiation source. •• For optimal reception, fully extend and adjust the position of the antenna. 1 2 3 Press FM/ repeatedly to select the FM source. Press and hold / for more than two seconds. »» The radio tunes to a station with strong reception automatically. Repeat step 2 to tune to more stations.
7 Other features Set the alarm timer This unit can be used as an alarm clock. You can select CD, FM, or USB as alarm source. Note •• Make sure that you have set the clock correctly. 1 2 3 4 In standby mode, press and hold SLEEP/ TIMER for more than two seconds. »» The hour digits are displayed and begin to blink. Press / Set the sleep timer To set the sleep timer, in turn on mode, press SLEEP/TIMER repeatedly to select a set period of time (in minutes). »» When sleep timer is activated, is displayed.
8 Product information Note •• Product information is subject to change without prior notice. Specifications Tuner Tuning Range Tuner Tuning grid Tuner Sensitivity - Mono, 26dB S/N Ratio - Stereo, 46dB S/N Ratio Search Selectivity Total Harmonic Distortion Signal to Noise Ratio 87.
USB playability information Compatible USB devices: • USB flash memory (USB2.0 or USB1.1) • USB flash players (USB2.0 or USB1.
9 Troubleshooting Warning •• Never remove the casing of this device. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www. philips.com/support). When you contact Philips, make sure that the device is nearby and the model number and serial number are available.
•• Some mobile phones may connect and disconnect constantly when you make or end calls. This does not indicate any malfunction of this unit. •• For some devices, the Bluetooth connection may be deactivated automatically as a power-saving feature. This does not indicate any malfunction of this unit. Timer does not work •• Set the clock correctly. •• Switch on the timer. Clock/timer setting erased •• Power has been interrupted or the power cord has been disconnected. •• Reset the clock/timer.
14 © WOOX Innovations Limited. All rights reserved. Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used by WOOX Innovations Limited under license from Koninklijke Philips N.V. BTM2335_12_UM_V1.
