Always there to help you Register your product and get support at www.philips.
Contents 1 Safety 2 Know these safety symbols Important safety instructions Hearing safety 2 2 3 2 Your micro music system 4 4 4 4 5 3 Before use 7 7 7 7 Introduction What's in the box Overview of the main unit Overview of the remote control Connect the FM antenna Connect power Install the remote control battery 4 Get started Turn on Set the clock Select a source Adjust the brightness of LCD display 8 8 8 8 9 5 Play from hard media 9 9 9 10 10 6 Use Bluetooth devices 11 11 11 12 7 Listen to
1 Safety Read and understand all instructions before you use this micro music system. If damage is caused by failure to follow the instructions, the warranty does not apply. Know these safety symbols This 'bolt of lightning' indicates uninsulated material within your unit may cause an electric shock. For the safety of everyone in your household, please do not remove product covering.
• If the product is transported in temperatures below 5°C, unpack the product and wait until its temperature matches room temperature before connecting it to the power outlet. Risk of overheating! • Never install this product in a confined space. Always leave a space of at least four inches around the product for ventilation. • Make sure that curtains or other objects never cover the ventilation slots on the product.
2 Your micro music system Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. If you contact the Consumer Care, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the rear of the apparatus. Write the numbers here: Model No. __________________________ Serial No.
c d e • Start, pause, or resume play. • Stop the play of music. • Connect a compatible USB storage device for music play. Connect a compatible USB device for charging. • f Disc compartment g h • • • • Press to eject the disc from the disc compartment. / Skip to the previous or next track. Press and hold to search within a track. Tune to a radio station. i VOL+/VOL• Increase or decrease the volume level.
d FM/ • Switch the source to FM tuner or the audio streamed from a Bluetooth device. e PRESET/ALBUM / • Skip to the previous or next album. • Select a preset radio station. f • • • / Skip to the previous or next track. Press and hold to search within a track. Tune to a radio station. g + VOL • Increase or decrease the volume level. h • Stop the play of music. i DISPLAY • In working mode, press to display the current time.
3 Before use Connect the FM antenna Note DC IN •• For optimal reception, fully extend the antenna and adjust its position, or connect an outdoor antenna. •• This product does not support AM (amplitude modulation) radio reception. Connect the AC power adaptor between • the DC IN socket on the back panel, and • the power supply. »» blinks. Install the remote control battery a c b Connect the FM antenna to the product.
4 Get started • Caution Press to switch this product • between the working mode and the normal standby mode, or • from the eco power standby mode to the working mode. •• Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence.
You can also press source buttons on the remote control to select a source. • FM/ : the FM tuner or the audio streamed from a Bluetooth device • CD: the disc in the disc compartment • AUDIO IN/USB: the audio input through the AUDIO IN socket, or the .mp3 files stored on the connected USB storage device 5 Play from hard media Play a disc Note •• Make sure that the disc contains playable audio content.
Buttons Note / •• Gibson Innovations does not guarantee compatibility with all USB storage devices. •• NTFS (New Technology File System) file product is not supported. REPEAT SHUFFLE 1 2 Program tracks Press USB or SOURCE to switch the source to . »» Play starts automatically. You can program a maximum of 20 tracks. Press / to select a folder. Press / Press to start play. to select a file. Control play During play, follow the instructions below to control play.
6 Use Bluetooth devices Bluetooth indicator Bluetooth connection Blinking blue Connecting or waiting for connection Connected Solid blue With this product, you can listen to audio from an external device through Bluetooth. Note Disconnect a device On your device, disable the Bluetooth connection with this product. •• Gibson Innovations does not guarantee the compatibility with all Bluetooth devices.
Buttons / Functions Start, pause, or resume play. Press to skip to the previous or next track. Stop play. Clear the pairing information In Bluetooth mode, press and hold remote control for 8 seconds. on the 7 Listen to FM radio Tune to an FM radio station Note •• Make sure that you have connected and fully extended the FM antenna. 1 2 Press FM or SOURCE repeatedly to switch the source to . Press and hold / until the frequency starts to change.
Program radio stations automatically Note •• You can program a maximum of 20 preset radio 8 Adjust sound The following operations are applicable to all supported media. stations. Press and hold PROG until the frequency starts to change. »» All available stations are programmed in the order of waveband reception strength. »» The first programed radio station is broadcast automatically.
9 Other features »» If TIMER is displayed, the alarm timer is activated. Use the alarm timer Stop an alarm This product can be used as an alarm clock. You can select the disc, FM, or .mp3 files on a USB storage device as alarm source. When an alarm rings, press to stop it. or SLEEP/TIMER Note •• If you do not stop an alarm, it keeps ringing for 30 Note minutes, and then the product automatically switches to normal standby mode. •• Make sure that you have set the clock correctly.
Listen to an external device Charge your USB device You can also listen to an external audio device, for example, MP3 player, through this product. Connect your USB device, such as, smart phone and tablet, to this product with USB cable for charging. Note •• Gibson Innovations does not guarantee the compatibility with all USB devices. AUDIO IN 1 2 3 Press AUDIO IN or SOURCE repeatedly to switch the source to . Connect an audio input cable with 3.
10 Product information Note •• Product information is subject to change without prior notice. General information Operation power consumption Eco standby power consumption USB Direct Dimensions: Main unit (W x H x D) Weight - With packing - Main unit Model: AS300-120AE250 (Philips) Input: 100 - 240 V ~, 50/60 Hz, 1.1 A Output: 12 V 2.5 A 20 W ≤ 0.5 W Version 1.1, 2.0 420 x 226 x 97 mm 3.4 kg 2.
USB playability information Maintenance Compatible USB devices: • USB flash memory (USB 2.0 or USB1.1) • USB flash players (USB 2.0 or USB1.1) • Memory cards (requires an additional card reader to work with this unit) Clean the cabinet • Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives.
11 Troubleshooting Warning •• Never remove the casing of this device. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www.philips.com/support). When you contact the Consumer Care, make sure that the product is nearby and the model number and serial number are available. Problems No power.
Problems The audio quality is poor after connection with a Bluetoothenabled device. Failed to connect a Bluetooth enabled device with this product. Solutions The Bluetooth reception is poor. Move the device closer to this product or remove any obstacle between them. The device does not support the profiles required for this product. The Bluetooth function of the device is not enabled. Refer to the user manual of the device to find out how to enable the function. This product is not in pairing mode.
Care of the environment Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/ EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste.
2015 © Gibson Innovations Limited. All rights reserved. This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. BTM2280_12_UM_V4.
