Always there to help you Register your product and get support at www.philips.
Contents 1 Important 2 Safety Notice 2 2 2 Your Micro Music System Introduction What's in the box Overview of the main unit Overview of the remote control 3 Get started Connect speakers Connect power Prepare the remote control Demonstrate the features Power on Set the clock Select a source 5 5 5 6 7 9 9 9 9 10 10 10 11 4 Play 12 5 Listen to the radio 15 6 Adjust sound 16 Play from disc Play from USB Control play Skip tracks Program tracks Play from Bluetooth-enabled devices Tune to a radi
1 Important Safety Read and understand all instructions before you use this micro music system. If damage is caused by failure to follow the instructions, the warranty does not apply. Warning •• Never remove the casing of this apparatus. •• Never lubricate any part of this apparatus. •• Never look into the laser beam inside this apparatus. •• Never place this apparatus on other electrical equipment. •• Keep this apparatus away from direct sunlight, naked flames or heat.
• • Batteries (packed or installed) shall not be exposed to excessive heat such as sunshine, fire or the like. • Remove batteries when the unit is not used for a long time. Only use attachments/accessories specified by the manufacturer. Notice Any changes or modifications made to this device that are not expressly approved by Gibson Innovations may void the user’s authority to operate the equipment.
programs, files, broadcasts and sound recordings, may be an infringement of copyrights and constitute a criminal offence. This equipment should not be used for such purposes. Care for your product • • • • Do not insert any objects other than discs into the disc compartment. Do not insert warped or cracked discs into the disc compartment. Remove the discs from the disc compartment if you are not using the product for an extended period of time. Only use microfiber cloth to clean the product.
2 Your Micro Music System Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/support. Introduction With this unit, you can: • enjoy audio from discs, USB devices, Bluetooth devices, and other external devices; • listen to radio stations.
Overview of the main unit a b c lk j a d ef • • Turn on the product. Switch to standby mode or ECO power standby mode. c Display panel • Show current status. e • • • • / Skip to previous/next track. Search within a track/disc. Tune to a radio station. Adjust time. • Start or pause play. f VOLUME knob • Adjust volume. g h 6 n o i Disc compartment b Bluetooth indicator • Indicate the Bluetooth connection status. d m i h g • Open or close the disc compartment. • • Stop play.
Overview of the remote control d a e b r c q p d o n e m • Play tracks randomly. f ALBUM/PRESET / • Select a preset radio station. • Skip to previous/next album. g DISPLAY • Adjust display brightness. • During playback, display the play information. h SLEEP/TIMER • Set sleep timer. • Set alarm timer. i CLOCK • Set the clock. • View clock information. k j PROG • Program tracks. • Program radio stations. • Auto store FM radio stations. j h / Skip to the previous/next track.
q FM/AUDIO IN • Select FM source. • Select AUDIO IN source. r 8 • EN Select Bluetooth source.
3 Get started Caution •• Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Connect power Caution •• Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit. •• Before you connect the AC power cord, ensure that you have completed all other connections. Always follow the instructions in this chapter in sequence.
Demonstrate the features In standby mode, press to demonstrate features of this device. »» The features are displayed one by one across the display panel. • To turn off the demonstration, press again. Power on Note •• The product switches to ECO power standby mode after 15 minutes in standby mode. Switch between standby mode and ECO powerstandby mode: • Press and hold for more than two seconds.
Select a source On the main music system Press SOURCE repeatedly to select a source. • [DISC]: the disc in the disc compartment • [USB]: .mp3 files stored on the connected USB storage device • [TUNER]: the FM tuner • [AUDIO IN]: the audio input through the AUDIO IN socket • [BT]: audio on the Bluetooth device On the remote control Press CD, FM, USB, orAUDIO IN to select each source directly. • CD: the disc in the disc compartment • FM: the FM tuner • USB: the .
4 Play Play from disc 1 2 3 4 Press CD to select CD source. Press to open the disc compartment. Insert a disc with the label side up. Press to close the disc compartment. »» Play starts automatically. If not, press . Control play / / Play from USB Note •• Make sure that the USB device contains playable audio content. 1 2 12 Insert a USB device into the VOL +/socket. Press USB to select the USB source. »» Play starts automatically. If not, press . EN SOUND DISPLAY Start, pause, or resume play.
Skip tracks BT When playing a CD: Press / to select tracks. When playing an MP3 disc and USB: 1 2 Press Press / to select an album or a folder. / to select a track or a file. Program tracks 3 Philips BTM1360 This function allows you to program 20 tracks in the desired sequence. 1 2 3 4 5 1 For MP3 tracks, press album. 2 to select an Press / to select a track, and then press PROG to confirm. Repeat steps 2 to 3 to program more tracks. Press to play the programmed tracks.
Tip •• The product can memorize up to 8 previously connected Bluetooth devices. To disconnect the Bluetooth-enabled device: • Deactivate Bluetooth on your device; or • Move the device beyond the communication range. Enter Bluetooth pairing mode Press and hold SOURCE/PAIRING for three seconds until your hear a beep sound to disconnect the currently connected device and enter Bluetooth pairing mode. Clear Bluetooth pairing history • Press and hold on the main set for 8 seconds.
5 Listen to the radio Tune to a radio station Tip •• Position the antenna as far as possible from TV, or other Program radio stations manually 1 2 3 radiation source. •• For optimal reception, fully extend and adjust the position of the antenna. 1 2 3 Press FM/AUDIO IN repeatedly to select FM source. Press and hold / for more than two seconds. »» The radio tunes to a station with strong reception automatically. Repeat step 2 to tune to more stations.
6 Adjust sound The following operations are applicable to all supported media. Select a preset sound effect • Press SOUND repeatedly to select a preset sound effect. • DSC1, DSC2, DSC3, DSC4, and DSC5 Adjust volume level • • On the remote control, press VOL +/repeatedly. On the main unit, rotate the volume knob. Mute sound • Press 16 EN to mute or unmute the sound.
7 Other features Note •• If CD/USB source is selected, but no disc is placed or no USB device is connected, the TUNER source is selected automatically. Set the alarm timer This product can be used as an alarm clock. You can select the disc, FM, or .mp3 files on a USB storage device as alarm source. Note •• Make sure that you have set the clock correctly. •• If the selected alarm source is unavailable, this product switches to FM mode automatically.
Note •• Philips does not guarantee the compatibility of this product with all devices. AUDIO IN Charge your devices With this micro music system, you can charge your external devices, such as your cell phone, MP3 player or other mobile devices. 1 2 18 Use a USB cable to connect the USB socket of product with the USB socket of your devices. Connect the product to power. »» Once the device is recognized, the charging starts.
8 Product information Note notice. Amplifier Maximum 30 W 60 Hz - 20 kHz; ±3 dB ≥75 dBA <1% 600 mV ± 100 mV RMS 22 kohm 4 ohm Full range 3.5" 83 ± 3dB/m/W Tuner (FM) Tuning Range Tuning grid Sensitivity - Mono, 26dB S/N Ratio - Stereo, 46dB S/N Ratio Search Selectivity Total Harmonic Distortion Signal to Noise Ratio 2.0 Full Speed 5V, 500mA S/N Ratio Semiconductor 12 cm/8 cm CD-DA, CD-R, CD-RW, MP3-CD 24 Bits/44.1 KHz <3% (1 KHz) 20 Hz - 20 kHz (44.
USB playability information Compatible USB devices: • USB flash memory (USB2.0 or USB1.1) • USB flash players (USB2.0 or USB1.
9 Troubleshooting Warning •• Never remove the casing of this device. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www. philips.com/support). When you contact Philips, make sure that the device is nearby and the model number and serial number are available.
•• This unit is already connected with another Bluetooth-enabled device. Disconnect that device and then try again. The paired mobile device connects and disconnects constantly. •• The Bluetooth reception is poor. Move the device closer to this unit or remove any obstacle between them. •• Some mobile phones may connect and disconnect constantly when you make or end calls. This does not indicate any malfunction of this unit.
Copyright © 2016 Gibson Innovations Limited. Revised Edition © 2017 This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. BTM1360_05_UM_V2.
