Always there to help you Register your product and get support at www.philips.
Contents 1 Important Safety 2 Your micro system Introduction What's in the box Overview of the main unit Overview of the remote control 3 Get started Place the unit Connect speakers Connect video options Connect FM antenna Connect power Prepare the remote control Demonstrate the features Set clock Turn on Find the correct viewing channel Select the correct TV system Change system menu language Set up EasyLink (HDMI-CEC control) 2 2 4 4 4 5 6 7 7 8 8 9 10 10 10 10 10 11 11 11 11 4 Play 13 13 14 15 15
1 Important Safety This 'bolt of lightning' indicates uninsulated material within the device may cause an electrical shock. For the safety of everyone in your household, please do not remove the covering. The 'exclamation mark' calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems.
• Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. Warning •• Never remove the casing of this device. •• Never lubricate any part of this device. •• Never place this device on other electrical equipment. •• Keep this device away from direct sunlight, naked flames or heat. •• Never look into the laser beam inside this device.
2 Your micro system Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Introduction With this unit, you can: • watch video from DVD/VCD/SVCD or USB storage devices; • enjoy audio from discs, Bluetooth-enabled devices, USB storage devices, or other external devices; • view pictures from discs or USB storage devices; • enjoy Karaoke by connecting a microphone; • listen to FM radio stations.
Overview of the main unit n a m b l k c j d i e f h g a • • • Turn the unit on or off. Switch to standby mode or Eco standby mode. Bluetooth indicator. b Disc compartment c • USB socket. d MIC IN • Connect a microphone. e SRC • Select a source: DISC, USB, TUNER, BT (Bluetooth), AUDIO IN. f g • Start, pause, or resume play. • Stop play. h i • • • • / Skip to the previous/next track. Search within a track/disc/USB. Tune to a radio station. Adjust time. • Headphone socket.
STANDBY a EJECT u b DISPLAY c SUBTITLE/PRESET d SOURCE t s OK • • SUBTITLE ( ): Select a preset radio station. AUDIO ( ): Set the subtitle language. Set time. • Return to the previous display menu. • Overview of the remote control f g +/• Adjust volume. h • e f AUDIO/ PRESET SOUND g p h i j k l a b 1 2 3 4 5 6 7 8 9 MENU 0 RDS OPTION • • PROG TIME CLOCK SET SLEEP /STANDBY Turn the unit on or off. Switch to standby mode or Eco standby mode.
s OK • Confirm a selection. t SOURCE • Select a source: DISC, USB, TUNER, BT (Bluetooth), AUDIO IN. u EJECT • Press to open or close the disc compartment. 3 Get started Caution •• Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus.
Note •• To avoid magnetic interference or unwanted noise, never place this apparatus and speakers too close to any radiation devices. •• Place this unit on top of a table. •• Never place this unit in an enclosed cabinet. •• Install this unit near the AC outlet where the AC power plug can be easily reached. Connect speakers Note •• For optimal sound, use the supplied speakers only. •• Connect only speakers with impedance that is the same or higher than the supplied speakers.
3 by a single remote control, such as volume control for both the TV and the home theater. TV If you cannot hear the TV audio through your device, set up the audio manually. SUB OUT VIDEO AUDIO IN HDMI SPEAKER OUT Option 2: Connect to TV through standard HDMI Best quality video If your TV is not HDMI ARC compliant, connect this product to the TV through a standard HDMI connection.
Connect power Demonstrate the features Caution •• Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit. •• Risk of electric shock! When you unplug the AC power cord, always pull the plug from the socket. Never pull the cord. •• Before you connect the AC power cord, ensure that you have completed all other connections. In standby mode, press and hold for three seconds to demonstrate features of this device.
Switch to standby mode Press again to switch the unit to standby mode. »» The clock (if set) is displayed on the panel. Switch to ECO standby mode: Press and hold for more than two seconds. »» The display panel is dimmed. Select the correct TV system Change this setting if the video is not displayed correctly. By default, this setting matches the most common setting for TVs in your country. 1 2 3 Note •• The unit switches to Eco Power Standby mode after 3 hours in standby mode.
• Note •• Depending on the manufacturer, HDMI-CEC is known by many names. For information about your device, see the user manual of the device. •• Philips does not guarantee 100% interoperability with all HDMI-CEC devices. Before you start • Connect your product to the HDMICEC compliant device through HDMI connection. • Make the necessary connections described in the quick start guide, and then switch the TV to the correct source for your home theater.
4 Play Play from disc 1 2 3 4 Press SOURCE repeatedly to select DISC source. Press »» The language options are displayed. If the selected audio channel is unavailable, the default disc audio channel is used. Note •• For some DVDs, the language can only be changed from the disc menu. Press MENU to access the menu. to open the disc compartment. Insert a disc with printed side facing upward. Select a subtitle language Press to close the disc compartment. »» Play starts automatically. If not, press .
[Mono Left] [Mono Right] [Mix-Mono] [Stereo] • • • • Play from USB or recored discs You can play DivX (Home Theater 3.1)/MP3/ JPEG picture files copied onto a CD-R/RW, recordable DVD, or USB storage device (Cable USB device is not applicable for this unit). 1 Press SOURCE repeatedly to select the DISC or USB source. 2 Note •• You can only play DivX (Home Theater 3.1) videos rented or purchased through the DivX registration code of this unit. •• Subtitle files with the following filename extensions (.
2 3 Press three numeric buttons sequentially to select a track( Total track numbers<999), or press four numeric buttons sequentially to select a track ( Total track numbers > = 1000) For example: Press 001 to select track 1, or press 0002 to select track 2. Press OK to confirm. Play options Control play ( / / / / +/SOUND DISPLAY ) Select a folder. Fast backward/forward. Skip to the previous or next title/ chapter/track/file. Pause or resume play. Stop play. Increase or decrease volume.
1) I n the [Karaoke Scoring] option, select a level (basic/intermediate/advance). 2) I n the [Karaoke Idol] option, turn on the contest. »» The song selection menu is displayed. Skip to a track For CD: Press / to select another track. For MP3 disc and USB: 1 2 Press Press / 3) I nput a track (VCD/SVCD) or a title/ chapter (DVD) as the first song. Up to four songs can be selected. 4) Then select [Start], and press OK to start play selected songs.
Your Bluetooth device supports both Near Field Communication (NFC) and Advanced Audio Distribution Profile (A2DP). Your Bluetooth device only supports A2DP. Choose Option 1 (recommended) or Option 2. STANDBY DISPLAY Note •• Compatibility with all NFC devices is not guaranteed. 3 4 SOURCE <2 cm SOURCE Choose Option 2.
5 Listen to the radio Tune to a radio station STANDBY DISPLAY Tip EJECT SUBTITLE/PRESET •• Make sure that you have connected the supplied FM SOURCE aerial. SOURCE •• Position the antenna as far as possible from TV, VCR, or OK other radiation source. •• For optimal reception, fully extend and adjust the position of the aerial. BTD7170 PIN 0000 1 2 Stream music through Bluetooth • Play audio on the Bluetooth device connected to this product.
Store FM radio stations manually 1 2 3 4 5 Tip •• There are definitions of RDS program types (see 'Product information' > 'RDS program types'). Tune to a FM radio station. Press PROG to activate programming mode. »» [PROG] (program) blinks. Press / repeatedly to select a number. Press PROG again to confirm. »» The frequency of the preset station is displayed. Repeat above steps to store more FM stations. Select stereo/mono broadcast Note •• Stereo broadcast is the default setting for tuner mode.
6 Other features Set the alarm timer This unit can be used as an alarm clock. You can select DISC, TUNER, or USB as alarm source. Note •• Make sure that you have set the clock correctly. 1 2 3 4 In standby mode, press and hold SLEEP/ TIMER for three seconds. »» [SET TIMER] is displayed, and then [DISC] is displayed and begins to blink. Press / ( / ) repeatedly to select an alarm source (DISC, TUNER, or USB). Press SLEEP/TIMER (or OK) to confirm. »» The hour digits are displayed and begin to blink.
Listen through a headphone Plug a headphone (not supplied) into the socket on front of this product. 7 Adjust settings 1 2 3 Press . Select the [Setup] page. Select a setting and press OK. • To return to the previous menu, press . • To exit the menu, press . General setup On the [General] page, you can set the following options: [Disc Lock]: Lock or unlock a disc. [OSD Language]: Select the preferred language for on-screen display. [DivX(R) VOD Code]: Display the DivX(R) registration code.
[TV Display] (TV display):The TV format determines the aspect ratio of display according to the type of TV you have connected. 4:3 Pan Scan (PS) 4:3 Letter Box (LB) 16:9 (Wide Screen) [4:3 Pan Scan]: full-height display with the trimmed sides. • [4:3 Letter Box]: wide-screen display with black bars on the top and bottom of the screen. • [16:9]: display ratio 16:9. [Picture Setting]: Select a predefined set of picture color settings. • [Standard]: original color setting.
Note •• Rated discs above the level you set in [Parental Control] require a password to be played. •• The ratings are country-dependent. To allow all discs to 8 Product information play, select [8 Adult]. •• Some discs have ratings printed on them but are not recorded with ratings. This function has no effect on such discs. [PBC]: Play VCD interactively according to the menu screen. • [On]: the menu screen is displayed. • [Off]: normal play is resumed.
Audio DAC Total Harmonic Distortion Frequency Response S/N Ratio 24 Bits/44.1 kHz <1% (1 kHz) 60 Hz - 16 kHz; ±3 dB >70 dBA Dimensions -M ain Unit (W x H x D) - S peaker Box (W x H x D) Weight - Main Unit - Speaker Box 230 x 145 x 240 mm 173 x 261 x 241 mm 2.9 kg 2 x 3.1 kg USB USB Direct Version USB Charging 2.0 full speed 1A Bluetooth Bluetooth version Frequency band Range V2.1 + EDR/support APT-X 2.4 GHz ~ 2.
USB playability information RDS program types Compatible USB devices: • USB flash memory (USB2.0 or USB1.1) • USB flash players (USB2.0 or USB1.
9 Troubleshooting Warning •• Never remove the casing of this device. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www.philips.com/support). When you contact Philips, make sure that the device is nearby and the model number and serial number are available.
The aspect ratio of the TV screen cannot be changed even though you have set the TV display format. •• The aspect ratio is fixed on the loaded DVD disc. •• The aspect ratio may not be changed for some TV systems. DivX video files cannot be played. •• Ensure that the DivX video file is complete. •• Ensure that the file extension is correct. •• Due to Digital Rights issue, the DRMprotected video files cannot be played through an analog video connection (e.g. composite, component and scart).
Clock/timer setting erased •• Power has been interrupted or the power cord has been disconnected. •• Reset the clock/timer. 10 Notice Any changes or modifications made to this device that are not expressly approved by WOOX Innovations may void the user’s authority to operate the equipment. Hereby, WOOX Innovations declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. You can find the Declaration of Conformity on www.philips.
cannot be disposed with normal household waste.Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health. Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.
Specifications are subject to change without notice 2015 © WOOX Innovations Limited. All rights reserved. Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used by WOOX Innovations Limited under license from Koninklijke Philips N.V. BTD7170_12_UM_V6.
