User Manual

Introduction:

Philips strives to continually bring you the best experience from our products. To obtain the optimal

latest features, you are highly recommended to upgrade the firmware of your player.

Preparation for firmware upgrade:

• A PC with an archive utility that supports the ZIP-format (e.g. WinZip for Windows).

• A USB flash device with enough free space to hold the firmware file. An empty one is advised to

avoid a crash among files.

(You can check the size of the firmware file at the top of the screen.)

Upgrade Procedure:

Step 1: Check your current firmware version

Turn on the player.

Press the <HOME> button on the remote control, select [Setup] > [Preferences] > [Version

Info] in the TV on-screen menu.

The firmware version will be displayed on the TV screen.

Compare the firmware version displayed to the latest version. If the existing firmware in your

player is of an earlier version than the new release, please proceed to Step 2.

Otherwise, the latest firmware is installed and hence an upgrade is not needed.

Step 2: Upgrade the firmware for your player

You can upgrade your firmware via a USB flash drive.

Upgrade firmware via USB

Download firmware.

Click on the Download icon at the top of the screen to download the new firmware package to

your computer.

Transfer firmware to a USB flash drive.

Warning: DO NOT remove the USB flash device during the firmware upgrade procedure. If an error

occurs during the upgrade, retry the procedure. If you need further assistance, please call your local

Philips Consumer Care Center or use our Live Chat function.

1. Check your current firmware

version

2. Upgrade the firmware for your

player

3. Confirm upgrade

successfulness

PAGE 1
Introduction: Philips strives to continually bring you the best experience from our products. To obtain the optimal latest features, you are highly recommended to upgrade the firmware of your player. Preparation for firmware upgrade: • • A PC with an archive utility that supports the ZIP-format (e.g. WinZip for Windows). A USB flash device with enough free space to hold the firmware file. An empty one is advised to avoid a crash among files.
PAGE 2
i. Extract the downloaded zip file, then, you will get a .hex file and a bin file on your PC. Note: Please DO NOT rename the file name to avoid an upgrade corruption. ii. Following the steps 3 and 4, DO NOT copy both files into USB flash drive 3. Upgrade the MCU software to the player Warning: DO NOT press any buttons or interrupt the main supply during the upgrading process, otherwise the product may become defective. i. Copy the extracted .hex file to the root directory in the USB flash drive ii.