User manual Register your product and get support at www.philips.
Contents 1 Important Safety Notice Declaration of conformity 2 Your Micro Music System Introduction What's in the box Overview of the main unit Overview of the remote control 3 Get started Connect FM/DAB+ antenna Connect power Prepare the remote control Power on Set the clock 4 Play Play from disc Play from USB Control play Skip tracks Program tracks Play from Bluetooth-enabled devices 5 Listen to the radio Listen to DAB+ radio Listen to FM radio 6 Adjust sound Adjust volume level Mute sound 2 2 2 2
1 Important Safety • • • This ‘bolt of lightning’ indicates uninsulated material within the device may cause an electrical shock. For the safety of everyone in your household, please do not remove the covering. The ‘exclamation mark’ calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems.
Disposal of your old product and battery Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. This symbol on a product means that the product is covered by European Directive 2012/19/EU. This symbol means that the product contains batteries covered by European Directive 2013/56/EU which cannot be disposed of with normal household waste.
2 Your Micro Music System Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/support.
Overview of the main unit 13 12 1 2 3 4 5 10 6 8 11 9 7 a b • • • c d e • Open or close the disc compartment. Press to select a source: DISC, USB, FM, DAB+, AUDIO IN, BT. In Bluetooth mode, press and hold for 2 seconds to disconnect the currently connected device and enter pairing mode. Switch this product on or to standby. • Connect USB storage devices. • Connect external audio devices. h Display panel • Show current status. i j • Start or pause play.
Overview of the remote control e • • • Tune to an FM station. Adjust time. Select a DAB+ station. • Select shuffle mode to play tracks randomly. Select repeat mode to play a track or all tracks repeatedly. • 1 2 18 3 f 17 16 g 4 • • • Display playback information, or radio service information. • • Set sleep timer. Set alarm timer. • • • Set the clock. View clock information. In standby, press and hold to toggle clock display on or off. • • • Program tracks. Program radio stations.
q r • • Select USB source. Select AUDIO IN source. • • Select Bluetooth source In Bluetooth mode, press and hold for more than 2 seconds to enter pairing mode 3 Get started Caution •• Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. Connect FM/DAB+ antenna Connect the supplied antenna to this product before listening to radio.
Switch to standby mode Press again to switch the product to standby with no clock display (ECO standby), or to standby with clock display. »» The red standby indicator lights up. • In standby, you may press and hold to toggle clock display on or off. Connect the power cord to the wall socket. Note Prepare the remote control •• The product switches to standby mode after 15 minutes of inactivity.
4 Play Play from disc 1 2 3 4 5 Press to select CD source. Press to open the disc compartment. Insert a disc with the label side up. Press to close the disc compartment. Play starts automatically. If not, press . BTB4800 Control play / / BTB4800 +/- Play from USB Start, pause, or resume play. Stop play. Select an album or a folder. Press to skip to the previous or next track. Press and hold to search backward/forward within a track. Play a track or all tracks repeatedly. Play tracks randomly.
2 Press file. / to select a track or a Program tracks BTB4800 This function allows you to program 20 tracks in the desired sequence. 1 2 3 4 5 In stop mode, press activate the program mode. »» is displayed. For MP3 tracks, press an album. Press / then press / to to select to select a track, and to confirm. Repeat steps 2 to 3 to program more tracks. Press tracks. Philips BTB4800 to play the programmed To erase the program Press twice.
To disconnect the Bluetooth-enabled device: • Deactivate Bluetooth on your device. • Press and hold for 2 seconds to enter pairing mode. 5 Listen to the radio With this product, you can listen to DAB + radio and FM radio. Note •• Position the antenna as far as possible from TV, or other radiation source. •• For optimal reception, fully extend and adjust the position of the antenna.
4 »» The product scans and stores all DAB+ radio stations automatically. »» After scan, the first available station is broadcast. Display DAB+ information Select a DAB+ radio station After DAB+ radio stations are scanned and stored, press / to select a DAB+ station. Store DAB+ radio stations manually 1 2 3 4 Press / station. to select a DAB+ radio Press / to allocate a number from 1–20 to this radio station, and then press to confirm. Repeat steps 1-3 to program more stations.
»» The first programmed radio station is broadcast automatically. Store FM radio stations manually 1 2 3 4 Tune to an FM radio station. Press to activate program mode. »» is displayed. Press / to allocate a number from 1–20 to this radio station, and then press to confirm. Repeat steps 1-3 to program more stations. Note 6 Adjust sound The following operations are applicable to all supported media. Adjust volume level • • On the remote control, press repeatedly.
7 Other features Set the alarm timer This product can be used as an alarm clock. You can select the disc, FM, or .mp3 files on a USB storage device as alarm source. Note •• Alarm timer is not available in AUDIO IN mode. •• If CD/USB source is selected, but no disc is placed or no USB device is connected, the radio source is selected automatically. 1 2 3 4 5 6 14 Make sure that you have set the clock correctly. In standby, press and hold for 2 seconds. »» The hour digits blink.
8 Product information Note AUDIO IN •• Product information is subject to change without prior notice. • BTB4800 • • • • • • • • • • • • • • • • • Rated output power (Amplifier): 2 x 15W RMS ≤ 0.3% THD Acoustic frequency response: 60 - 15KHz Driver: 2 x 3” full range, 6Ω Bass enhancement: 2 x bass port Support disc type: CD-DA, CD-R, CDRW, MP3-CD (8/12 cm) Bluetooth version: V2.1 +EDR Bluetooth supported profiles: HFP V1.5, A2DP V1.2, AVRCP V1.0 Bluetooth frequency band / Output power: 2.402GHz~ 2.
USB playability information Supported MP3 disc formats Compatible USB devices: • USB flash memory (USB2.0 or USB1.1) • USB flash players (USB2.0 or USB1.
9 Troubleshooting •• Warning •• Never remove the casing of this device. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www.philips.com/support). When you contact Philips, make sure that the device is nearby and the model number and serial number are available.
• Connect the L-shape plug to this product, and fit the plug on the other end into your wall socket. •• not indicate any malfunction of this unit. For some devices, the Bluetooth connection may be deactivated automatically as a power-saving feature. This does not indicate any malfunction of this unit. Timer does not work •• Set the clock correctly. •• Switch on the timer. Music playback is unavailable on this unit even after successful Bluetooth connection.
Copyright © 2017 Gibson Innovations Limited. This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. The Philips trademark and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. used under license. BTB4800_12_UM_V1.
