User manual Register your product and get support at www.philips.
Contents 1 Important Safety Notice 2 Your Micro Music System Introduction What's in the box Overview of the main unit Overview of the remote control 3 Get started Place your product Connect the radio antenna Connect power Prepare the remote control Power on Set the clock 4 Play Play from disc Play from USB Control play Skip tracks Program tracks Play from Bluetooth-enabled devices 5 Listen to the radio Listen to DAB+ radio Listen to FM radio 6 Adjust sound Select a preset sound effect Adjust volume le
1 Important Warning •• Never remove the casing of this apparatus. •• Never lubricate any part of this apparatus. •• Never look into the laser beam inside this Safety apparatus. •• Never place this apparatus on other electrical equipment. Read and understand all instructions before you use this micro music system. If damage is caused by failure to follow the instructions, the warranty does not apply. •• Keep this apparatus away from direct sunlight, naked flames or heat.
Hearing safety Caution Care of the environment Disposal of your old product and battery •• To avoid hearing damage, limit the time you use the headphones at high volume and set the volume to a safe level. The louder the volume, the shorter is the safe listening time. Be sure to observe the following guidelines when using your headphones. • Listen at reasonable volumes for reasonable periods of time. • Be careful not to adjust the volume as your hearing adapts.
Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment. This apparatus includes this label: Note The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Gibson Innovations is under license.
2 Your Micro Music System Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/support.
Overview of the main unit 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 a IR sensor b LED indicator • Standby indicator: turns red when this product is switched to standby. • Bluetooth indicator: turns blue to indicate the Bluetooth connection status. c Display panel • Show current status. d e g h i • Start or pause play. • • Stop play. Erase a program. • Eject a disc. • Headphone socket. j Disc slot • • • 6 f EN Switch this product on or to standby.
m n • Select a DAB+ station. • (volume) Adjust volume. • Connect to the supplied radio antenna. o Micro USB socket for DAB upgrade (for use by the service center only) p q • Connect external audio devices. • jack Connect to the supplied power adapter. Overview of the remote control 1 2 18 3 17 16 4 15 5 14 13 12 6 11 7 10 8 9 a b c d • Switch this product on or to standby. • Select CD source. • Select FM or DAB+ source. • • / Skip to the previous/next track.
e • • • Tune to an FM station. Adjust time. Select a DAB+ station. • Select shuffle mode to play tracks randomly. Select repeat mode to play a track or all tracks repeatedly. • f g h i j k l m n o p • • 8 r / Select a preset radio station. Skip to previous/next album. • Display playback information, or radio service information. • • Set sleep timer. Set alarm timer. • • • Set the clock. View clock information. In standby, press and hold to toggle clock display on or off.
3 Get started Caution •• Use of controls or adjustments or Connect the radio antenna Connect the supplied radio antenna to this product before listening to radio. performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. Place your product Before you place this product on the table, attach the supplied table stand to the main unit, as illustrated below.
Prepare the remote control Caution •• Risk of product damage! When the remote control is not used for long periods, remove the batteries. •• Batteries contain chemical substances, so they should be disposed of properly. To insert the remote control battery: 1 2 3 Open the battery compartment. Insert the supplied AAA battery with correct polarity (+/-) as indicated. Power on Press . »» The product switches to the last selected source.
4 Play Note •• To view clock in power on mode, press briefly . •• In standby, you may press and hold to toggle clock display on or off. •• If clock display is turned on in standby, power consumption increases. Play from disc 1 2 Press to select CD source. Insert a disc. »» Play starts automatically. If not, press . BTB2670 Play from USB Note •• Make sure that the USB device contains playable audio content. 1 2 Insert a USB device into the socket. Press to select the USB source.
Skip tracks For CD: Press / to select tracks. For MP3 disc and USB: 1 2 BTB2670 Control play Start, pause, or resume play. Stop play. Select an album or a folder. Press to skip to the previous or next track. Press and hold to search backward/forward within a track. Play a track or all tracks repeatedly. Play tracks randomly. Increase or decrease the volume. Mute or unmute sound. / / +/- Select a preset sound equalizer. Adjust display brightness. Show playback information. 12 EN Press / folder.
Play from Bluetoothenabled devices 3 Note •• Compatibility with all Bluetooth devices is not guaranteed. •• Any obstacle between the unit and the device can reduce the operational range. •• The effective operation range between this Select “Philips BTB2670” on your Bluetooth enabled device and if necessary input '0000' as the paring password. • If you fail to search for “Philips BTB2670” or cannot pair with this product, press and hold for more than 2 seconds to enter pairing mode.
To connect and play from the third Bluetooth-enabled device • Press and hold for more than 2 seconds to enter pairing mode. »» The first connected device or the device with no music playback is disconnected. 5 Listen to the radio With this product, you can listen to DAB + radio and FM radio. Note •• Position the antenna as far as possible from TV, or other radiation source. •• For optimal reception, fully extend and adjust the position of the antenna.
2 Press and hold for more than 2 seconds. »» The product scans and stores all DAB+ radio stations automatically. 3 4 »» After scan, the first available station is broadcast. Store DAB+ radio stations manually 1 2 3 4 Press / station. to select a DAB+ radio Display DAB+ information While listening to DAB+ radio, press repeatedly to display various information (if available), such as frequency, signal strength, time, etc.
Display RDS information Note •• You can store a maximum of 20 FM radio stations. 1 2 Press FM source. repeatedly to select Press and hold for more than 2 seconds. »» All available stations are programmed in the order of waveband reception strength. »» The first programmed radio station is broadcast automatically. Store FM radio stations manually 1 2 3 4 Tune to an FM radio station. Press to activate program mode. »» is displayed.
6 Adjust sound The following operations are applicable to all supported media. Select a preset sound effect • Press repeatedly to select a preset sound effect. 7 Other features Set the alarm timer This product can be used as an alarm clock. You can select the disc, radio, or .mp3 files on a USB storage device as alarm source. Note Adjust volume level • mode. •• If CD/USB source is selected, but no disc is placed or no USB device is connected, the radio source is selected automatically.
Activate/deactivate alarm timer 3 In standby mode, press repeatedly to activate or deactivate timer. »» If timer is activated, is displayed. • Start to play the device (see the device user manual). BTB2670 In standby, you may press and hold to toggle clock display on or off. Set the sleep timer This music system can switch to standby automatically after a set period of time. • When the music system is turned on, press repeatedly to select a set period of time (in minutes).
2 Connect the product to power. »» Once the device is recognized, the charging starts. 8 Product information Note Note •• Compatibility of this product with all devices is not guaranteed. •• Product information is subject to change without prior notice. • • • • • • • • • • • • • • Rated output power (Amplifier): Total 20W (max.) Acoustic frequency response: 63Hz - 20kHz Speaker driver: 2 x 2.
• • • • • Power: • Model (Philips branded AC power adapter): AS360-120-AE250 • Input: 100-240 V~, 50/60 Hz, 1.2A • Output: DC 12.0V, 2.5A Operation power consumption: 15W Standby power consumption: < 0.5W (clock display off) Dimensions (W x H x D): 433 x 226 x 67 mm (without stand) Weight: 2.2 kg USB playability information Compatible USB devices: • USB flash memory (USB2.0 or USB1.1) • USB flash players (USB2.0 or USB1.
9 Trouble shooting Warning •• Never remove the casing of this device. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www.philips.com/support). When you contact Philips, make sure that the device is nearby and the model number and serial number are available.
Music playback is unavailable on this unit even after successful Bluetooth connection. •• The device cannot be used to play music through this unit wirelessly. The audio quality is poor after connection with a Bluetooth-enabled device. •• The Bluetooth reception is poor. Move the device closer to this unit or remove any obstacle between them. Bluetooth cannot be connected with this unit. •• The device does not support the profiles required for this unit.
Copyright © 2017 Gibson Innovations Limited. This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. The Philips trademark and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. used under license. BTB2670_12_UM_V1.
