Micro music system User manual BTB2570 Register your product and get support at www.philips.
Contents 1 Important Safety Notice Declaration of conformity 2 Your Micro Music System Introduction What's in the box Overview of the main unit Overview of the remote control 3 Get started Connect speakers Connect the radio antenna Connect power Prepare the remote control Power on Set the clock 4 Play Play from disc Play from USB Control play Skip tracks Program tracks Play from Bluetooth-enabled devices 5 Listen to the radio Listen to DAB+ radio Listen to FM radio 6 Adjust sound Adjust volume level M
1 Important Safety • • • This ‘bolt of lightning’ indicates uninsulated material within the device may cause an electrical shock. For the safety of everyone in your household, please do not remove the covering. The ‘exclamation mark’ calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems.
Disposal of your old product and battery Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. This symbol on a product means that the product is covered by European Directive 2012/19/EU. This symbol means that the product contains batteries covered by European Directive 2013/56/EU which cannot be disposed of with normal household waste.
2 Your Micro Music System Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/support.
Overview of the main unit AUDIO IN 13 FM/DAB AERIAL (75 ) 8 12 11 10 9 1 8 2 3 7 4 5 6 a IR sensor b LED indicator • Standby indicator: turns red when this product is switched to standby. • Bluetooth indicator: turns blue to indicate the Bluetooth connection status. c • Switch this product on or to standby. d e • Connect USB storage devices. • Open or close the disc compartment. f Disc compartment g Volume knob • Adjust volume. h Display panel • Show current status.
i • • Press to select a source: DISC, USB, TUNER, AUDIO IN, BT. In Bluetooth mode, press and hold for more than 2 seconds to disconnect the currently connected device and enter pairing mode. Overview of the remote control 1 • Start or pause play. 2 18 • • 3 17 • • • • Stop play. Erase a program. / Skip to previous/next track. Search within a track/disc. Tune to a radio station. Adjust time. • socket Connect with the speakers. • Connect external audio devices.
e • • • Tune to an FM station. Adjust time. Select a DAB+ station. • Select shuffle mode to play tracks randomly. Select repeat mode to play a track or all tracks repeatedly. • f g h i j k l m n o p • • r • • Select USB source. Select AUDIO IN source. • • Select Bluetooth source In Bluetooth mode, press and hold for more than 2 seconds to enter pairing mode / Select a preset radio station. Skip to previous/next album. • Display playback information, or radio service information.
3 Get started Caution •• Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. AERIAL FM/DAB ) (75 AUDIO IN Always follow the instructions in this chapter in sequence. Connect speakers Note •• Insert the stripped portion of each speaker wire into the socket completely. •• For better sound quality, use the supplied speakers only.
Switch to standby mode AERIAL FM/DAB ) (75 AUDIO IN Press again to switch the product to standby with no clock display, or to standby with clock display. »» The red standby indicator lights up. • In standby, you may press and hold to toggle clock display on or off. Connect the power cord to the wall socket. Note Prepare the remote control •• The product switches to standby mode after 15 minutes of inactivity.
4 Play Play from disc 1 2 3 4 5 Press CD to select DISC source. Press to open the disc compartment. Insert a disc with the label side up. Press to close the disc compartment. BTB2570 Play starts automatically. If not, press . Control play / / BTB2570 +/- Play from USB Note •• Make sure that the USB device contains playable audio content. 1 2 10 Insert a USB device into the socket. Press / repeatedly to select the USB source. »» Play starts automatically. If not, press .
Skip tracks For CD: Press / Play from Bluetoothenabled devices to select tracks. Note For MP3 disc and USB: 1 2 Press / folder. Press file. to select an album or a / to select a track or a •• Compatibility with all Bluetooth devices is not guaranteed. •• Any obstacle between the unit and the device can reduce the operational range. •• The effective operation range between this unit and your Bluetooth enabled device is approximately 25 meters (82 feet).
3 Select ' BTB2570' on your Bluetooth enabled device and if necessary input '0000' as the paring password. »» After successful pairing and connection, the Bluetooth indicator turns solid blue, and the unit beeps twice. • 4 If you fail to search for ‘ BTB2570’ or cannot pair with this product, press and hold for 2 seconds to enter pairing mode. Play audio on the connected device. »» Audio streams from your Bluetooth enabled device to this product.
2 Press and hold for more than 2 seconds. »» The product scans and stores all DAB+ radio stations automatically. »» After scan, the first available station is broadcast. 3 4 To select an option, press . If sub-option is available, repeat steps 2-3. Display DAB+ information Select a DAB+ radio station While listening to DAB+ radio, press repeatedly to display various information (if available), such as frequency, signal strength, time, etc.
»» The first programmed radio station is broadcast automatically. Store FM radio stations manually 1 2 3 4 Tune to an FM radio station. Press to activate program mode. »» is displayed. Adjust volume level • On the remote control, press repeatedly. On the main unit, rotate the volume knob. • Repeat steps 1-3 to program more stations. Mute sound •• To overwrite a programmed station, store another station in its place. Select a preset FM radio station In FM mode, press / to select a preset number.
7 Other features Set the alarm timer This product can be used as an alarm clock. You can select the disc, radio, or .mp3 files on a USB storage device as alarm source. Note •• Alarm timer is not available in AUDIO IN mode. •• If CD/USB source is selected, but no disc is placed or no USB device is connected, the radio source is selected automatically. 1 1 2 3 4 5 Make sure that you have set the clock correctly. In standby, press and hold for 2 seconds. »» The hour digits blink.
3 Start to play the device (see the device user manual). Note •• Compatibility of this product with all devices is not guaranteed. AERIAL FM/DAB ) (75 AUDIO IN 8 AUDIO IN BTB2570 Charge your devices With this micro music system, you can charge your external devices, such as your cell phone, MP3 player or other mobile devices. 1 2 16 Use a USB cable to connect the USB socket of this product with the USB socket of your devices. Connect the product to power.
8 Product information • • Dimensions (W x H x D): 220 x 104 x 242 mm (Main unit); 140 x 263 x 183 mm (Speaker box) Weight: 1.7 kg (Main unit); 2 x 1.76 kg (Speaker box) Note •• Product information is subject to change without prior notice. • • • • • • • • • • • • • • • • • Rated output power (Amplifier): Total 45W (max.
Supported MP3 disc formats • • • • • ISO9660, Joliet Maximum title number: 128 (depending on file name length) Maximum album number: 99 Supported sampling frequencies: 32 kHz, 44.1 kHz, 48 kHz Supported Bit-rates: 32~256 (kbps), variable bit rates 9 Troubleshooting Warning •• Never remove the casing of this device. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service.
Remote control does not work •• Before you press any function button, first select the correct source with the remote control instead of the main unit. •• Reduce the distance between the remote control and the unit. •• Insert the batteries with polarities (+/– signs) aligned as indicated. •• Replace the battery. •• Aim the remote control directly at the sensor on the front of the unit. No disc detected •• Insert a disc. •• Check if the disc is inserted upside down.
•• For some devices, the Bluetooth connection may be deactivated automatically as a power-saving feature. This does not indicate any malfunction of this unit. Timer does not work •• Set the clock correctly. •• Switch on the timer. Clock/timer setting erased •• Power has been interrupted or the power cord has been disconnected. •• Reset the clock/timer. How to keep clock display on or off in standby? •• In standby, press and hold to toggle clock display on or off.
EN 21
22 EN
EN 23
Copyright © 2017 Gibson Innovations Limited. This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. The Philips trademark and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. used under license. BTB2570_12_UM_V1.