Quick Install Guide

Note for mounting

To secure the mounting on wall, concrete wall is required.

Use screws to mount the device on the wall

1. Use this sheet as a template. Mark the position where you want to hang the device on the wall (as

shown above) and then drill two 6mm diameter holes.

2. Secure the 2 dowels and 2 screws (both supplied) in the holes respectively. Leave a gap of 5 mm

between the head of the screw and the wall.

3. Hang the device on the fastening screws.

BTB2462/BTB2465/05_wall mounting _V1.0

140 mm (5.51")

Wall mounting instructions

Drill holes on wall at hole

positions marked.*

BTB2465_05 Wall Mounting 140 x100.indd 1 20/04/2016 3:17:06 PM

PAGE 1
40 mm (5.51") Wall mounting instructions Drill holes on wall at hole positions marked.* Note for mounting To secure the mounting on wall, concrete wall is required. Use screws to mount the device on the wall 1. Use this sheet as a template. Mark the position where you want to hang the device on the wall (as shown above) and then drill two 6mm diameter holes. 2. Secure the 2 dowels and 2 screws (both supplied) in the holes respectively. Leave a gap of 5 mm between the head of the screw and the wall. 3.