User manual

5EN
3 Get started
Always follow the instructions in this
chapter in sequence.
Turn on/o
• To turn the speaker on, press and
hold
for over two seconds.
» The Bluetooth indicator starts
ashing.
» The battery level indicators light
up briey.
» The speaker beeps.
• To turn the speaker o, press and
hold
for two seconds again.
Note
• When there is no Bluetooth connection for
15 minutes or the battery is at low level, the
speaker turns o automatically to save power.
Check the battery level
The speaker is powered by the built-in
rechargeable battery. After power-on,
the speaker shows the battery level
immediately, and the battery indication
disappears in ve seconds.
• To manually check the battery level,
briey press
in either power-on or
power-o mode.
» The dierent behavior of the four
LEDs indicates dierent battery
levels.
LED indication:
Battery
power
LED 1 LED 2 LED 3 LED 4
Full Solid white
> 8% Solid white O
50% -
80%
Solid white O
20% -
50%
Solid
white
O
Low
battery
(<20%)
Flash
red
O
Charge the built-in battery
Note
•
It takes you approximately three hours to
fully charge the battery.
• The micro USB socket is for charging only.
• Rechargeable battery has a limited number
of charge cycles. Battery life and number of
charge cycles vary by use and settings.
• You can use a power adaptor compatible
with Quick Charge 3.0 (not supplied; 5V
2A output recommended) to speed up the
charging process.
LED 1
LED 3
LED 4
LED 2