Always there to help you Register your product and get support at www.philips.
Contents 1 Important 2 2 Your Bluetooth speaker 3 3 3 4 3 Get started 5 5 6 4 Use Bluetooth devices 7 7 8 8 8 8 Introduction What's in the box Overview of the speaker Power supply Turn on Connect a device Play from Bluetooth device Control your phone call Disconnect the Bluetooth-enabled device Enter Bluetooth pairing mode Connect another Bluetooth-enabled device 5 Other features Listen to an external device Charge your mobile devices Adjust volume Reset the speaker 8 9 9 9 9 9 6 Product infor
1 Important Warning •• Never remove the casing of this speaker. •• Never lubricate any part of this speaker. •• Never place this speaker on other electrical equipment. •• Keep this speaker away from direct sunlight, naked flames or heat. •• Make sure that you always have easy access to the power cord, plug, or adaptor to disconnect the speaker from the power. • • • • • • Make sure that there is enough free space around the speaker for ventilation.
2 Your Bluetooth speaker Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Introduction With this speaker, you can • enjoy audio from your Bluetooth-enabled devices or other external audio devices; and • charge mobile devices through the micro USB socket.
Overview of the speaker a b i h g f e d c a • Turn the speaker on or off. b PAIRING • Enter Bluetooth pairing mode. • Disconnect Bluetooth connection. c DC IN • Connect power. d AUDIO IN • Connect an external audio device. e Reset • Restore factory default settings. f CHARGING • Charge mobile devices (in AC mode). g Volume knob • Adjust volume. h 4 • • • EN Answer or reject an incoming call. End the current phone call. Transfer the call to your mobile device.
3 Get started 2 Insert 4 AA batteries with correct polarity (+/-) as indicated. Always follow the instructions in this chapter in sequence. Power supply Either AC power or alkaline battery (LR6 AA) can be used as power supply of this product. Option 1: Battery power Caution •• Risk of explosion! Keep batteries away from heat, sunshine, or fire. Never discard batteries in fire. •• Batteries contain chemical substances, so they should be disposed of properly.
Turn on Press . »» The speaker switches to Bluetooth mode. »» The LED indicator flashes blue. Note •• If battery is low, the LED indicator flashes red. Switch to standby mode The speaker switches to standby mode in the following situation: • Press again; • The connection with Bluetooth device or other device is invalid for 15 minutes; or • Music playback is stopped for 15 minutes.
4 Use Bluetooth devices With this speaker, you can listen to audio from Bluetooth-enabled devices and control the incoming call through Bluetooth. Connect a device Note 4 •• Make sure that your Bluetooth device is compatible with this speaker. •• Before pairing a device with this speaker, read its user manual for Bluetooth compatibility. •• The speaker can memorize a maximum of 4 paired devices.
Play from Bluetooth device Note •• If there is an incoming call on the connected mobile phone, music play pauses. After successful Bluetooth connection, play audio on the Bluetooth device. »» Audio streams from your Bluetooth device to the speaker. Control your phone call After Bluetooth connection, you can control an incoming call with this speaker. Button Function Press to answer an incoming call. Press and hold to reject an incoming call. During a call, press to end the current call.
5 Other features Note •• The USB socket is for charging only. Listen to an external device With this speaker, you can also listen to an external audio device such as an MP3 player. CHARGING Note •• Make sure that music playback through Bluetooth is paused. 1 Connect an audio input cable (not supplied) with a 3.5 mm connector on both ends to • the AUDIO IN socket on this speaker, and • the headphone socket on the external device.
6 Product information Note •• Product information is subject to change without prior notice. Specifications Amplifier Rated Output Power Signal to Noise Ratio AUX Input 10W RMS > 62 dBA 600 mV Bluetooth Bluetooth Version Supported Profiles Range V4.0 HFP, A2DP, AVRCP 10 m (Free space) General information Power Supply - AC Power (power adapter) - Battery Charging Voltage and Current Operation Power Consumption 10 EN Brand name: PHILIPS; Model: TPA103B18120-EU; Input: AC100-240 V~, 50/60 Hz, 1.
7 Troubleshooting Warning •• Never remove the casing of this device. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www. philips.com/support). When you contact Philips, make sure that the device is nearby and the model number and serial number are available.
8 Notice Any changes or modifications made to this device that are not expressly approved by WOOX Innovations may void the user’s authority to operate the equipment. Compliance 1177 Hereby, WOOX Innovations declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. You can find the Declaration of Conformity on www.philips.com/ support. Environmental information All unnecessary packaging has been omitted.
EN 13
2014 © WOOX Innovations Limited. All rights reserved. Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used by WOOX Innovations Limited under license from Koninklijke Philips N.V. BT5500_12_UM_V3.
