Quick start guide

To fully enjoy your new Beard and Head

Trimmer, a body comb for trimming hair

below the neckline is included as well as a

pouch for convenient storage.

Body Trimming with Body Comb

– Make sure that the Groomer is fully

charged before you start trimming.

– Make sure hair is clean and dry as wet hair

tends to stick to the body. Take your time

and do not move the Groomer too fast.

Make smooth and gentle movements.

– Always use the body comb when trimming

sensitive areas.

1 Press trimming head on Groomer making

sure the projection on the back of the

trimming head ts exactly onto the notch

in the hair chamber (g. 1).

2 Slide the body comb into the guiding

grooves on both sides of the handle (g. 2).

3 Turn the Zoom Wheel to the desired hair

length setting.

The body comb cuts hair to a length of

3/64-23/32in / 1-18mm.

Norelco is a registered trademark of

Philips Electronics North America Corporation

PHILIPS is a registered trademark of

Koninklijke Philips N.V.

www.philips.com

4222.002.8747.1

BT5210_4222_002_8747_1_LEAFLET_A7_bl.indd 2-3 24/08/16 17:15

PAGE 1
To fully enjoy your new Beard and Head Trimmer, a body comb for trimming hair below the neckline is included as well as a pouch for convenient storage. Norelco is a registered trademark of Philips Electronics North America Corporation PHILIPS is a registered trademark of Koninklijke Philips N.V. © 2016 Philips Electronics North America Corporation. All rights reserved. www.philips.com 4222.002.8747.1 BT5210_4222_002_8747_1_LEAFLET_A7_bl.
PAGE 2
4 The setting selected is shown on the front of the appliance. (fig. 3). – If you are trimming for the first time, start by using the comb at the maximum trimming length setting (23/32 in/18mm) to prevent accidentally trimming hairs too short. As you become familiar with the settings, adjust Hair Length Setting Selector to desired trimming length. Selector will ‘click’ into position at each setting. 5 Turn the Groomer ON (fig. 4).