User manual BT3900 Register your product and get support at www.philips.
Contents 1 Important Safety Notice 2 Your Bluetooth speaker Introduction What's in the box Overview of the speaker 3 Get started Turn on/off Check the battery level Charge the built-in battery 4 Play from Bluetooth devices Connect a Bluetooth device Play from a connected Bluetooth device Disconnect a device Reconnect a device Clear pairing information Control your phone call 5 Other features Listen to an external device Adjust volume Attach the lanyard cable 6 Specifications 7 Troubleshooting Genera
1 Important Safety Warning •• Never remove the casing of this speaker. •• Never place this speaker on other electrical Compliance sunlight, naked flames or heat. Hereby, Gibson Innovations declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. You can find the Declaration of Conformity on www.philips.com/support. Only use attachments or accessories specified by the manufacturer.
service centre to have a professional remove the rechargeable battery. Inform yourself about the local separate collection system for electrical and electronic products and rechargeable batteries. Follow local rules and never dispose of the product and rechargeable batteries with normal household waste. Correct disposal of old products and rechargeable batteries helps prevent negative consequences for the environment and human health.
2 Your Bluetooth speaker Overview of the speaker Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/ welcome. Introduction With this speaker, you can enjoy audio from Bluetooth-enabled devices or other external audio devices through a 3.5mm audio-in cable. a • • b -/+ • Adjust volume.
3 Get started Always follow the instructions in this chapter in sequence. Turn on/off • To manually check the battery level, briefly press in either power-on or power-off mode. »» The different behavior of the four LEDs indicates different battery levels. LED indication: LED 1 LED 2 LED 3 LED 4 • To turn the speaker on, press and hold for over two seconds. »» The Bluetooth indicator starts flashing. »» The battery level indicators light up briefly.
To charge the built-in battery: • Pull out the USB cable from the USB lanyard cable as illustrated. • Connect the speaker to AC power by using a power adaptor (not supplied; 5V 0.5A adaptor recommended). System Battery status status System behavior On During charging Beep once, without charging indication. Off During charging Shows the charging indication Off Fully charged All LEDs are on, then turn off after three minutes.
4 Play from Bluetooth devices With this speaker, you can listen to audio from Bluetooth-enabled devices and control the incoming call through Bluetooth. 2 3 On your Bluetooth device, enable Bluetooth and search for Bluetooth devices that can be paired (see the user manual of the device). Select [Philips BT3900] displayed on your device for pairing. If necessary, input “0000” as the pairing password. »» After successful connection, the speaker beeps twice, and the LED turns solid blue.
Button Tip •• You can also use your Bluetooth device to control play. Disconnect a device • • • • Press and hold for two seconds; Turn off the speaker; Disable Bluetooth on your device; or Move the device beyond the communication range. Reconnect a device • • When you turn on the speaker, it tries to reconnect the last connected device automatically; If not successful, select [Philips BT3900] on your Bluetooth menu to start reconnection. Clear pairing information • Press and hold for 10 seconds.
5 Other features Listen to an external device With this speaker, you can also listen to an external audio device such as an MP3 player. Adjust volume During music playback, press -/+ to increase or decrease volume. Tip •• You can press and hold -/+ to increase or decrease volume continuously. •• When the volume reaches the maximum, the speaker beeps twice. Note •• Make sure that music playback through Bluetooth is stopped.
6 Specifications 7 Trouble shooting Note •• Product information is subject to change without prior notice. Warning •• Never remove the casing of this device. Rated output power (Amplifier) 4W RMS ≤ 1% THD Acoustic frequency response 95-20000 Hz Speaker driver 1 x 2” full range, 4 Ω Bass enhancement 1 x 2.25” passive radiator Bluetooth version V2.1+EDR Bluetooth supported profiles HFP V1.6, A2DP V1.2, AVRCP V1.4 Bluetooth frequency band / Output power 2.400GHz ~ 2.
•• If the issue remains, when the speaker is switched on, hold both the - and + keys at the same time for 7 seconds until the speaker is off. Then wait for the speaker to reset and switch on again automatically. About Bluetooth device The audio quality is poor after connection with a Bluetooth-enabled device. •• The Bluetooth reception is poor. Move the device closer to this product or remove any obstacle between them. Fail to find [Philips BT3900] on your device for pairing.
Copyright © 2017 Gibson Innovations Limited. This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. BT3900_00 _UM_V3.
