Always there to help you Register your product and get support at www.philips.
Contents 1 Important Safety 2 Your micro system Introduction What's in the box Overview of the main unit Overview of the remote control 2 2 3 3 3 4 5 3 Get started 6 6 6 6 6 7 4 Play 8 8 8 8 8 5 Use the Bluetooth devices 9 9 9 Connect power Demonstrate the features Prepare the remote control Set clock Turn on Play from USB Control play Skip to a track Program tracks Play from Bluetooth-enabled devices Connect a device through NFC 6 Listen to the radio 11 11 11 11 11 7 Other features 12 12 12
1 Important Safety Safety Warning •• Never remove the casing of this apparatus. •• Never lubricate any part of this apparatus. •• Never look into the laser beam inside this apparatus. •• Never place this apparatus on other electrical equipment. •• Keep this apparatus away from direct sunlight, naked flames or heat. •• Ensure that you always have easy access to the power cord, plug or adaptor to disconnect the apparatus from the power. • • • • • The device shall not exposed to dripping or splashing.
2 Your micro system Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Introduction With this unit, you can: • enjoy audio Bluetooth-enabled devices, NFC enabled devices, USB storage devices, or other external devices; • listen to FM radio stations.
Overview of the main unit k a j b i h c g f d e a • • Turn the unit on or off. Switch to standby mode or Eco standby mode. b SOURCE • Select a source: USB, BT, AUDIO IN or FM. c • Stop play or erase a program. d Display panel • Show current status. e Bluetooth indicator • Show Bluetooth status. f • • / Skip to the previous/next track. Select a preset radio station. g VOLUME +/• Adjust volume. h • Jack for a USB device. i AUDIO IN • Audio input jack (3.5mm) for an external audio device.
f VOL +/• Adjust volume. Overview of the remote control g MUTE • Mute or restore volume. a WOOFER b c r h TIMER • Set the alarm timer. q i CLOCK • Set the clock. • View clock information. p j SLEEP • Set sleep timer. AUDIO IN FM PRESET/ALBUM d e REPEAT f SHUFFLE g h i MUTE DISPLAY PROG TIMER CLOCK SLEEP o n m l k j k PROG • Program tracks. • Program radio stations. • Auto store FM radio stations. l DISPLAY • Adjust display brightness. m SHUFFLE • Play tracks randomly.
3 Get started Caution •• Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the back of the apparatus. Write the numbers here: Model No. __________________________ Serial No.
4 Repeat steps 2-3 to set hour and minute. Note •• If no button is pressed in 90 seconds, the system exits clock setting mode automatically. Tip •• You can view clock information in power-on mode by pressing CLOCK. Turn on Press . »» The unit switches to the last selected source. Switch to standby mode Press again to switch the unit to standby mode. »» The clock (if set) is displayed on the panel. Switch to ECO standby mode: Press and hold for more than two seconds. »» The display panel is dimmed.
4 Play Skip to a track For USB: Play from USB 1 2 Press Press / to select an album or a folder. / to select a track or a file. Note •• Make sure that the USB device contains playable audio content. 1 2 Press USB to select the USB source. Insert a USB device into the socket. »» Play starts automatically. If not, press . Program tracks You can program a maximum of 20 tracks. 1 2 3 4 5 Press PROG to activate the program mode. For MP3 tracks, press album.
5 Use the Bluetooth devices 3 4 Play from Bluetooth-enabled devices Select 'Philips BT2110 on your Bluetooth enabled device and if necessary input '0000' as the paring password. »» After successful pairing and connection, the Bluetooth indicator turns solid blue, and the speaker beeps twice. Play audio on the connected device. »» Audio streams from your Bluetooth enabled device to this unit.
3 4 On your Bluetooth device, accept the pairing request with "BT2110". If necessary, input "0000" as the pairing password. Follow the on-screen instructions to complete the pairing and connection. »» After successful pairing and connection, the micro music system beeps twice and the Bluetooth indicator turns solid blue.
6 Listen to the radio Tune to a radio station Tip Program radio stations manually 1 2 3 •• Position the antenna as far as possible from TV, VCR, or other radiation source. •• For optimal reception, fully extend and adjust the position of the antenna. 1 2 3 Press FM/ repeatedly to select the FM source. Press and hold / for more than two seconds. »» The radio tunes to a station with strong reception automatically. Repeat step 2 to tune to more stations.
7 Other features Set the alarm timer This unit can be used as an alarm clock. You can select USB, or FM as alarm source. •• Make sure that you have set the clock correctly. 2 3 4 To set the sleep timer, in turn on mode, press SLEEP repeatedly to select a set period of time (in minutes). »» When sleep timer is activated, is displayed. Otherwise, disappears. Adjust the display brightness Press DISPLAY repeatedly to adjust the display brightness.
8 Product information Note •• Product information is subject to change without prior notice. Specifications USB Direct Version USB 5 V Power Maximum Output Power Frequency Response Signal to Noise Ratio Total Harmonic Distortion Aux Input 80 W 60 Hz - 16 kHZ; ±3 dB >70 dBA <1% 600 mV RMS Speakers Speaker Sensitivity 2 x 8 ohm + 4 ohm 2.75" full range + 5.
• File name in Unicode UTF8 (maximum length: 32 bytes) Unsupported USB formats: • Empty albums: an empty album is an album that does not contain MP3/WMA files, and will not be shown in the display. • Unsupported file formats are skipped. For example, word documents (.doc) or MP3 files with extension .dlf are ignored and not played. • WMA, AAC, WAV, PCM audio files • DRM protected WMA files (.wav, .m4a, .m4p, .mp4, .
9 Troubleshooting Warning •• Never remove the casing of this device. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www. philips.com/support). When you contact Philips, make sure that the device is nearby and the model number and serial number are available.
Timer does not work •• Set the clock correctly. •• Switch on the timer. Clock/timer setting erased •• Power has been interrupted or the power cord has been disconnected. •• Reset the clock/timer.
10 Notice Any changes or modifications made to this device that are not expressly approved by WOOX Innovations may void the user’s authority to operate the equipment. Care of the environment Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. Compliance Hereby, WOOX Innovations declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
Trademark notice This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by WOOX Innovations is under license. © 2014 CSR plc and its group companies.
EN 19
Specifications are subject to change without notice. 2014 © WOOX Innovations Limited. All rights reserved. Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used by WOOX Innovations Limited under license from Koninklijke Philips N.V. BT2110_10_UM_V1.
