BT110 User manual Portable speaker Register your product and get support at www.philips.
Contents 1 Important 2 Your portable speaker Introduction What's in the box Overview of the speaker 3 Get started Attach the string Charge the built-in battery Turn on/off 4 Play from Bluetooth devices Connect a device Disconnect a device Reconnect a device Connect another device 2 3 3 3 4 5 5 5 5 6 6 7 7 7 5 Play from external devices 8 6 Product information 9 9 9 9 9 Audio Speaker Bluetooth General information 7 Troubleshooting General About Bluetooth device 8 Notice Compliance Care of the env
1 Important Warning •• Never remove the casing of this product. •• Never place this product on other electrical equipment. •• Keep this product away from direct sunlight, naked flames or heat. • • • • • • • • • Read these instructions. Heed all warnings. Follow all instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Only use attachments/accessories specified by the manufacturer.
2 Your portable speaker Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Introduction This speaker has passed splash-proof test (IPX4) and can be used near water. With this speaker, you can enjoy audio from Bluetooth-enabled devices or other external devices.
Overview of the speaker a b c d e a • • • b • Enter Bluetooth pairing mode. After Bluetooth connection, respond to a call. Clear Bluetooth pairing information. Turn the speaker on or off. c LED indicator • Indicate battery or Bluetooth connection status. d AUDIO IN • Connect an external audio device. e DC IN • Recharge the built-in battery.
3 Get started Always follow the instructions in this chapter in sequence. Connect the USB cable between • the DC IN socket on the speaker, and • a USB socket on a computer. Attach the string For easy carrying, attach the supplied string to this speaker as illustrated. The LED indicator indicates the battery status. Charge the built-in battery The speaker is powered by a built-in rechargeable battery. Note •• Before use, fully charge the built-in battery. •• The micro USB socket is for charging only.
4 Play from Bluetooth devices 2 sec. With this speaker, you can listen to audio from Bluetooth-enabled devices. Connect a device Note 2 •• The speaker can memorize a maximum of four paired devices. The fifth paired device will replace the first one. •• Any obstacle between this speaker and a Bluetooth device can reduce the operational range. •• Keep away from any other electronic device that may cause interference.
Play from a Bluetooth-enabled device Note •• Music play pauses when there is an incoming call, and resumes when your phone call ends. After successful Bluetooth connection, play music on the connected Bluetooth device. »» Music streams from your Bluetooth device to the speaker. Tip Disconnect a device • • • • Reconnect a device • • •• You can use your Bluetooth device to control play. Control your phone call After Bluetooth connection, you can control an incoming call with this speaker.
5 Play from external devices With this speaker, you can also listen to an external audio device such as an MP3 player. Note •• Make sure that music playback through Bluetooth is stopped. 1 2 Connect an audio input cable (not supplied) with a 3.5 mm connector on both ends to • the AUDIO IN socket on this speaker, and • the headphone socket on the external device. Play audio on the external device (refer to its user manual). »» The speaker switches to the AUDIO IN mode.
6 Product information Note •• Product information is subject to change without prior notice. General information DC Power (Supply Input) Built-in Battery Dimensions - Main Unit (W x H x D) Weight - Main Unit 5 V, 1 A 3.7 V, 800 mAh 98 x 77 x 35 mm 0.
7 Trouble shooting Warning •• Never remove the casing of this device. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www.philips.com/support). When you contact Philips, make sure that the device is nearby and the model number and serial number are available. General No power • Recharge your speaker.
8 Notice Any changes or modifications made to this device that are not expressly approved by Gibson Innovations may void the user’s authority to operate the equipment. Compliance Hereby, Gibson Innovations declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. You can find the Declaration of Conformity on www.philips.com/support. This product is designed to be waterproof in compliance with IEC 60529 IPX4.
foam (buffer) and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment. Trademark notice The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Gibson Innovations Limited is under license.
EN 13
2016 © Gibson Innovations Limited. All rights reserved. This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. BT110_00 _UM_V3.
