bSure 2 Philips Multimedia Projector User Guide
Controls 1. A/V Mute: To mute the sound of the projector and to mute the picture. 2. Source: To select the current projection source (Computer, Component, RGBS, S-Video, Video). The button toggles between the five signals. 3. -/+: To adjust the volume. 4. Menu: To activate and deactivate the menu. 5. OK: To confirm actions in the menu when the menu is on screen. 6. Standby/Standby indicator: To switch the projector in or out of the Power/Standby mode.
Remote Control 1. Stand by On: To switch the projector in or out of the Power/Standby mode. 2. Mouse Left/Right: Function as the Left and Right mouse keys of your pc when USB or PS/2 connection has been made. 3. -Volume+: To adjust the volume. 4. Menu: To activate and de-activate the menu. 5. Source: To select the current projection source (Computer, Component, RGBS, S-Video, Video). The button toggles between the five signals. 6. D-Freeze: To capture a (moving) picture.
Connections Data source connections 1. Computer: Input socket to connect to the Data out terminal of a computer. 2. Audio in computer: Input socket to connect to the Audio out terminal of a computer. 3. USB: In-/Output socket to connect a PC or Apple Macintosh computer equipped with a USB downlink connection. When USB connection is used the mouse cursor on the connected computer can be controlled via the projector remote control.
Operation 1. Remove the lens cap. 2. When switching on, first switch on the projector and then the computer. Press any button on projector or remote control to switch on the projector. The Standby indicator lights up orange. Then, when the projection lamp comes on, the Standby indicator lights up green and the start-up screen appears for several seconds. 3. Select the required source, Computer, by pressing the Source button repeatedly 4. Turn on the computer.
Moving/Turning Off 1. Before disconnecting the power cord to completely turn off the projector, make sure that the cooling fan has stopped (about 3 minutes after the projector has been switched to Power/Standby). 2. Wait until the cooling fan has stopped before moving the projector. 3. Replace the lens cap. 4. Disconnect the cables. 5. Store the projectors and cables in the provided bag.
