Owner's manual

After 2 weeks of
daily usage, your skin
should have adapted
to treatment with
VisaPure. However,
if you still experience
strong skin reactions
after 2 weeks of daily
usage, we advise you
to stop using VisaPure
and give your skin
some time to recover.
You can continue your
treatment once the
skin reactions have
disappeared, using
reduced treatment time
and frequency. If the
strong skin reactions
reoccur, we advise you
to contact your doctor.
- We advise you to
not cleanse your skin
longer than 1 minute
at a time, to prevent
overtreatment.
- Use a hairband or hair
clips to avoid your
hair getting caught in
the rotating parts.
General
- Please note that the condition of
the skin varies throughout the year.
Facial skin can get dryer during
the winter season. In that case you
can reduce the treatment time or
frequency, depending on the needs
of your skin.
- The appliance cannot be used
directly from the wall socket.
- Regular cleaning of the appliance
ensures optimal results and a
longer lifetime for the appliance.
- Do not clean the
appliance with water
that is hotter than
shower temperature
(max. 40°C/104°F).
- Do not put the
appliance or any part
in the dishwasher.
- Charge, use and store
the appliance at a
temperature between
10°C/50°F and
40°C/104°F.
- Do not use the
appliance on chapped
skin, after eye surgery,
open wounds or if
you suer from skin
diseases or skin
irritations, such as
severe acne, sunburn,
skin infection etc.
- Do not use the
appliance if you are
taking steroid-based
medication.
- If you wear piercings
on your face, remove
the piercings before
you use the appliance
or make sure that
you do not use the
appliance on or near
the piercing.
- If you wear jewelry or
glasses, take them o
before you use the
appliance or make sure
- The appliance complies with the
internationally approved IEC safety
regulations and can be safely used
in the bath or shower and cleaned
under the tap.
- The appliance is equipped with an
automatic voltage selector and is
suitable for mains voltages ranging
from 100 to 240 volts.
Electromagnetic elds (EMF)
This Philips appliance complies with all
applicable standards and regulations
regarding exposure to electromagnetic
elds.
Introduction
Thank you for choosing to buy Philips
VisaPure Essential Mini. Before you get
started, we hope you will register your
product at www.philips.com/welcome
in order to enjoy dedicated product
support and oers designed especially
for you.
So what is VisaPure Essential Mini and
how can it help your skin? Cleansing is
an essential part of the daily skincare
routine, but traditional methods do not
always leave your skin as clean and
radiant as it could be. That is why we
have developed VisaPure Essential Mini
- our exciting new approach to facial
cleansing. Forget manual cleansing, with
VisaPure Essential Mini you can enjoy
clean, radiant skin, quickly and easily
every day. VisaPure Essential Mini uses
gentle rotating movements to cleanse
deeply, remove impurities and make-
up to leave skin feeling soft and fresh.
Designed to complement your current
routine, you can use VisaPure Essential
Mini together with your current cleanser.
It also helps skincare products applied
after cleansing – such as your favorite
moisturizer – to be absorbed better.
You will notice the cleansing eect
immediately - experiencing smoother,
more radiant-looking skin. VisaPure
Essential Mini comes ready to use with
a brush head. Additional brush heads
for dierent skin types and purposes
are available separately. Ready to get
started? Use VisaPure Essential Mini
twice daily to enjoy soft, cleansed skin
and to reveal your natural radiance. We
hope you and your skin will enjoy using
VisaPure Essential Mini.
you do not use the
appliance on or near
the jewelry or glasses.
- Do not use the
appliance with self-
made cleansers or
cleansers containing
harsh chemicals or
rough particles.
- If you have sensitive
skin or experience
skin irritation after
using the appliance
with the normal brush
head, we advise
you to switch to the
sensitive brush head.
- VisaPure cleanses
your skin deeply and
stimulates blood
circulation. If your skin is
used to the treatment,
you may experience
slight skin reactions
like redness or skin
tightness on occasion.
If your skin is not used
to the treatment,
these reactions may
be stronger and can
last longer, but should
disappear after some
hours. To reduce these
skin reactions, you can
shorten the treatment
time, reduce the
treatment frequency
and/or apply less
pressure on the skin
during treatment.
Using the appliance
You can either use the appliance in front
of the sink, in the shower or in the bath.
We advise you use VisaPure Essential
Mini with your favorite cleanser. You
can cleanse your face with VisaPure
Essential Mini twice a day.
Daily facial cleansing with
VisaPure
Cleansing procedure
Note: The appliance does not work
directly from the wall socket (Fig. 2).
Note: Do not use the brush head on
the sensitive skin around the eyes.
1 Push the brush head onto the
connection pin until it locks into
position with a click (Fig. 3).
2 Moisten the brush head with water
or liquid cleanser or apply the
cleanser directly on your skin before
you use the appliance. Do not use
the appliance with a dry brush head,
as this can irritate the skin (Fig. 4).
3 Place the brush head on your skin.
4 Press the on/o button once to
switch on the appliance. Press twice
to switch o the appliance (Fig. 5).
Note: We advise you to not cleanse
your skin for longer than 1 minute to
prevent overtreatment.
5 Gently move the brush head across
your skin from the nose towards the
ear (Fig. 6).
Do not push the brush head too
hard onto the skin to make sure the
treatment remains comfortable.
6 After the treatment, rinse and dry
your face.
7 Clean the brush head with water.
Cleaning and maintenance
Never use scouring pads, abrasive
cleaning agents or aggressive
liquids such as petrol or acetone to
clean the appliance.
Cleaning the appliance and the
brush head
Clean the appliance and the brush
head thoroughly with water after each
use, to ensure optimum performance.
Make sure the appliance is switched
o before you start cleaning it.
1 Rinse the handle and the brush
head under the tap with warm
water (max. 40°C/104°F) (Fig. 8).