BDS4621_EN.qxd 13-12-2004 10:38 Pagina 1 Philips Business Solutions E User Manual G Benützersanleitung I S F Manuel de l’utilisateur TYPE NR.
BDS4621_EN.qxd 13-12-2004 10:38 Pagina 2 User Manual BDS4621 TABLE OF CONTENTS 1. Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2. Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2.1 Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2.2 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BDS4621_EN.qxd 13-12-2004 10:38 Pagina 3 User Manual BDS4621 1. IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions. 8.
BDS4621_EN.qxd 13-12-2004 10:38 Pagina 4 User Manual BDS4621 16. Damage Requiring Service - The appliance should be serviced by qualified service personnel when: A.The power supply cord or the plug has been damaged; B. Objects have fallen, or liquid has been spilled into the appliance; C.The appliance has been exposed to rain; D.The appliance does not appear to operate normally or exhibits a marked change in performance; E. The appliance has been dropped, or the enclosure damaged. 17.
BDS4621_EN.qxd 13-12-2004 10:38 Pagina 5 User Manual BDS4621 Note to the CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.
BDS4621_EN.qxd 13-12-2004 10:38 Pagina 6 User Manual BDS4621 CLEANING & CARE • To avoid possible shock hazard, please be sure that the television is unplugged from the electrical outlet before cleaning. • When cleaning the television screen, take care not to scratch or damage the screen surface (avoid wearing jewelry or using anything abrasive). • Wipe the front of the screen with a clean cloth dampened with water. Use even, easy, vertical strokes when cleaning.
BDS4621_EN.qxd 13-12-2004 10:38 Pagina 7 User Manual BDS4621 2. BEFORE USE The 46” WVGA (wide-screen with VGA resolution) Plasma Display is an ideal product for individual users and commercial exhibitioners. The product is a precise electronic product. Users should read the following instructions carefully to maximize the performance of the product: 2.1 Unpacking • • • • • The product is packaged in a carton together with the standard accessories.
BDS4621_EN.qxd 13-12-2004 10:38 Pagina 8 User Manual BDS4621 3. PRODUCT FEATURES • • • • • 8 The 46” PDP provides quality image displays and is suitable for a variety of multimedia applications. Available input signals: - The standard PC module provides RGB (D-SUB, 15 Pin) and digital DVI input connectors, and a RS-232 communication connector (D-SUB, 9 Pin Male).
BDS4621_EN.qxd 13-12-2004 10:38 Pagina 9 User Manual BDS4621 4. PACKAGE CONTENTS User Manual (1x) Power cable (1x) Note: Power cable will vary depending on shipping area. S- Video cable (1x). SUB-D, 15 PIN cable (1x). AV- cable (1x). POWER WIDE PIP FREEZE AUTO FULL WHITE WOW MUTE DISPLAY MENU Remote control (1x) Including batteries UM-4 (2x).
BDS4621_EN.qxd 13-12-2004 10:38 Pagina 10 User Manual BDS4621 5. NAMES AND FUNCTIONS OF PARTS 5.1 Sideview 1 Power switch. 2 Power cable. 3 Power jack. 4 Power outlet on the wall. • Connect the power cable to the product, then connect the main plug into the wall outlet. Note: • 3 1 2 4 10 Power plug types vary between countries.The power plug shown may not be the type supplied with your set. Push the power switch (0 = OFF / 1 = ON).
BDS4621_EN.qxd 13-12-2004 10:38 Pagina 11 User Manual BDS4621 5.2 Front View 1 Remote control window The window includes the power indicator and the IR remote control sensor. LEDs are used to indicate the power status. • Indicator ON (red) means: ‘Standby’ mode. • Indicator ON (green) means: ‘Power ON’ mode. • Indicator flashing (red/green) alternately means: ‘Power Saving’ mode or switching from Standby to Power On.
BDS4621_EN.qxd 13-12-2004 10:38 Pagina 12 User Manual BDS4621 p π Left/right arrow buttons A. These buttons are used in the ‘OSD Menu’ screen. The right button π has the function of Enter. B. These buttons can be used for the adjustment of the volume when the ‘OSD Menu’ is not shown on the screen. Press the left button p to reduce the volume. Press the right button π to increase the volume. STANDBY/ON Is used to activate the Display or return it to standby mode.
BDS4621_EN.qxd 13-12-2004 10:38 Pagina 13 User Manual BDS4621 5.3 Rear View 1 Speaker Terminals: Can be used to connect 5 2 3 4 5 6 4 3 2 6 external speakers (optional accessories) to the product. Maximum power output: 10W + 10W. Stand. Stand mounting holes: use the standard screws to mount the stand. Wall Mount holes: use the standard screws to attach the wall mount (optional accessory). Transport handles: use the handles to help transport the product.
BDS4621_EN.qxd 13-12-2004 10:38 Pagina 14 User Manual BDS4621 Audio In 2 Is an audio input terminal (RCA connector) connecting to the audio output terminal of the video output device. ‘CVBS In’ and ‘S-Video’ share this audio terminal. Video In Is a Composite video input terminal (RCA connector) connecting to the video output terminal of the video output device. S-Video Is a Y/C S-Video input terminal (DIN 4 PIN) connecting to the S-Video output terminal of the video output device.
BDS4621_EN.qxd 13-12-2004 10:38 Pagina 15 User Manual BDS4621 5.4 Remote Control Function of buttons: 1. POWER Press this button to turn the power On or Off. 8 9 1 10 POWER 2 11 3 WIDE PIP FREEZE AUTO FULL WHITE WOW MUTE DISPLAY 12 13 MENU MENU 4 2. WIDE Press this button to select wide screen. Pressing this button again will restore the original size of the screen.
BDS4621_EN.qxd 13-12-2004 10:38 Pagina 16 User Manual BDS4621 11. AUTO • The Display automatically adjusts the phase, vertical/horizontal position when pressing this button in PC mode. • The Display chooses the appropriate video format automatically when pressing this button in Video mode. 8 9 1 10 POWER 2 11 3 WIDE PIP FREEZE AUTO FULL WHITE WOW MUTE DISPLAY 12 12 DISPLAY Image and system information display ON/OFF.
BDS4621_EN.qxd 13-12-2004 10:38 Pagina 17 User Manual BDS4621 Inserting of Remote Control Batteries • • • Turn the remote control upside down, press and slide off the battery cover. Insert two AA batteries in the remote control as shown in the diagram. (Positive + and negative polarities - must match the markings in the compartment). Place the cover in reverse order until the lock snaps. Scope of Remote Control • Be sure the remote control is pointed towards the remote control window on the display.
BDS4621_EN.qxd 13-12-2004 10:38 Pagina 18 User Manual BDS4621 6. CONNECTION TO EXTERNAL EQUIPMENT Rear view 6.1 PC Module For operating the Plasma monitor as a PC monitor. SUB-D, (15 PIN) connects to analog RGB output interface (Input option RGB 1). DVI connects to digital RGB output interface (Input option RGB 2). Note: • The DVI connector type of the Display is DVI-I, which does not support analog signal input.
BDS4621_EN.qxd 13-12-2004 10:38 Pagina 19 User Manual BDS4621 6.2 PC Module + Video Module • • • • 19 The functions of SUB-D, DVI and RS-232 terminals are the same as for the PC module. The component terminal (Y/PbCb/PrCr) connects to the component output of a video output device (such as DVD or HDTV TUNER).The audio should input via Audio 1 (INPUT Option:Y Cb/Pb Cr/Pr). The S-Video terminal connects to the Y/C S-Video output of a video output device (such as S-VHS or DVD).
BDS4621_EN.qxd 13-12-2004 10:38 Pagina 20 User Manual BDS4621 • • The S-Video and CVBS inputs share the Audio 2 input. The CVBS Out terminal can be used to connect the unit to another TV or display and transmits the signal input via CVBS to the other display. 6.
BDS4621_EN.qxd 13-12-2004 10:38 Pagina 21 User Manual BDS4621 7. BASIC OPERATION 7.1 Power ON/OFF POWER WIDE PIP FREEZE AUTO FULL WHITE WOW MUTE DISPLAY MENU MENU EXIT MTS Display standby mode • Press the ‘POWER’ button to turn on the Display.The power indicator changes from red to green. • Press the ‘POWER’ button again to return the Display to standby mode.The power indicator changes from green to red.
BDS4621_EN.qxd 13-12-2004 10:38 Pagina 22 User Manual BDS4621 7.3 Selection of VIDEO Input Mode Press the ‘Video’ button repeatedly to select a signal source from the Video module. The signal sources are displayed in the following sequence: POWER WIDE PIP FREEZE AUTO FULL WHITE WOW MUTE DISPLAY MENU MENU EXIT MTS INPUT ZOOM PC 1 2 3 4 5 6 7 8 9 0 100 VIDEO CH + VOL RETURN - 7.
BDS4621_EN.qxd 13-12-2004 10:38 Pagina 23 User Manual BDS4621 7.5 OSD Option Adjustment • POWER WIDE PIP FREEZE AUTO FULL WHITE WOW MUTE DISPLAY MENU MENU • EXIT • MTS INPUT ZOOM PC The buttons for OSD option adjustment are: - MENU p, MENU π - Button ▲, Button ▼ - Button p, Button π - EXIT button Press the MENU p, MENU π to open the last used ‘OSD Menu’. Press again MENU p or MENU π to select the desired menu page.
BDS4621_EN.qxd 13-12-2004 10:38 Pagina 24 User Manual BDS4621 7.6 Sound Adjustment • POWER WIDE PIP FREEZE AUTO FULL WHITE WOW MUTE DISPLAY MENU MENU • EXIT MTS INPUT ZOOM PC 1 2 3 4 5 6 7 8 9 0 100 • VIDEO Press and hold the VOL + button to increase the sound volume level and press and hold the VOL - button to decrease the sound volume level. Press the MUTE button to mute the internal or external speakers.
BDS4621_EN.qxd 13-12-2004 10:38 Pagina 25 User Manual BDS4621 7.8 Other Functions • POWER WIDE PIP FREEZE AUTO FULL WHITE WOW MUTE DISPLAY MENU • MENU • EXIT MTS INPUT ZOOM PC 1 2 3 4 5 6 7 8 9 VIDEO If an image cannot be displayed after changing the timing in PC mode, press the AUTO button. The unit will automatically adjust the phase, horizontal/vertical position to optimize the display.
BDS4621_EN.qxd 13-12-2004 10:38 Pagina 26 User Manual BDS4621 7.9 OSD Functions General Description of OSD Function Pages: PC Table Display Image Audio Brightness Contrast Red Green Blue Reset H. Position V. Position Phase adj. Sync adj.
BDS4621_EN.qxd 13-12-2004 10:38 Pagina 27 User Manual BDS4621 8. OSD PAGES AND FUNCTIONS 8.1 Display Pages PC Display page Screen • Only the Brightness, Contrast and Reset functions can be adjusted when using a PC input signal. Note: To adjust the Brightness of the Red, Green and Blue, select at first User in the ‘Color Temp’ function of the ’Misc’. OSD page. Next, return to the Display page again.
BDS4621_EN.qxd 13-12-2004 10:38 Pagina 28 User Manual BDS4621 8.2 Image and AV System Page PC Image and System page. • From PC input signal, the Horizontal position,Vertical position, and Phase sync can be adjusted. The Aspect Ratio can be selected to your liking. The DPMS can be set On or Off. ? H. Position 50 V. Position 50 Phase Adj.
BDS4621_EN.qxd 13-12-2004 10:38 Pagina 29 User Manual BDS4621 8.4 Language and Screen Saver Page PC and Video Language and Screen Saver Page • Language You can select the languages provided by OSD from this option. • Image Reverse or Image Move When a still image is being displayed on the screen for a long period of time, use this features to prevent screen burn in and protect your screen.
BDS4621_EN.qxd 13-12-2004 10:38 Pagina 30 User Manual BDS4621 8.5 Misc. Page PC Misc page • OSD Position By means of this option you can select the location of the OSD menu on the screen. • OSD Timeout By means of this option you can adjust length of time that the OSD shall remain on screen. • OSD Rotation Use this option to rotate the OSD through 90 degrees. • Color Temp This allows you to select the Color Temperature you like.
BDS4621_EN.qxd 13-12-2004 10:38 Pagina 31 User Manual BDS4621 8.6 PIP Settings (PC only) • If PIP is activated by pressing the π button when the PIP Settings rule is selected in the ‘PC Misc’ OSD page, next ‘Video Display’ OSD appears, so you can adjust the colors for the small Picture which will be shown on the screen. • After color adjustment in this Display menu, press the MENU π button on the Remote control, so the ‘PIP Settings’ OSD page will appear, see next picture.
BDS4621_EN.qxd 13-12-2004 10:38 Pagina 32 User Manual BDS4621 8.8 Status ? PC Status Page • This OSD page displays the Resolution and Vertical/Horizontal Frequency when a PC input is operating. If PIP is in use, the sub-picture source and system are also displayed. ? VIDEO Status page • The Input source and System are displayed when using video signals. Signal Information Resolution 1024 x 768 V Frequency 60 Hz H Frequency 48.
BDS4621_EN.qxd 13-12-2004 10:38 Pagina 33 User Manual BDS4621 9. OPTIONAL ACCESSORIES Stand (BM05111) Attach the Stand to the PDP set.
BDS4621_EN.
BDS4621_EN.qxd 13-12-2004 10:38 Pagina 35 User Manual BDS4621 10. TECHNICAL SPECIFICATIONS Screen Size: 46” Wide screen Screen Area: 1007mm(W) x 567.4mm(H) Aspect Ratio: 16 : 9 External Size: 1138mm(W) x 691mm(H) x 98mm(D) (w/o Stand and handles) Weight 37kg (w/o Stand) Resolution: 852 (H) x 480 (V) pixels (Each pixel has R/G/B 3-color cels) Pixel Dot Pitch: 1.182mm(H) x 1.182mm(V) Color: 16.
BDS4621_EN.qxd 13-12-2004 10:38 Pagina 36 User Manual BDS4621 11. FACTORY SETTINGS Resolution Horizontal No 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 720 x 400 640 x 400 640 x 480 640 x 480 640 x 480 640 x 480 640 x 480 800 x 600 800 x 600 800 x 600 800 x 600 800 x 600 832 x 624 1024 x 768 1024 x 768 1024 x 768 1024 x 768 Horizontal Frequency (KHz) 31.47 37.90 31.50 35.00 37.50 37.86 43.30 35.16 37.90 46.90 48.08 53.70 49.00 48.40 56.50 60.00 68.70 Vertical Frequency (Hz) 70.08 85.00 60.00 67.
BDS4621_EN.qxd 13-12-2004 10:38 Pagina 37 User Manual BDS4621 12. CLEANING AND TROUBLESHOOTING Important • Make sure that the power cable is unplugged from the socket before cleaning the product. • Never use solvent, thinner, benzene or alcohol to clean the Display. Such chemicals may damage the cabinet, screen glass and remote control, and cause the paint to peel. Cleaning the cabinet and Remote Control • Use a soft cotton cloth for cleaning.
BDS4621_EN.qxd 13-12-2004 10:38 Pagina 38 User Manual BDS4621 Problem: Measures: No Power • (Power indicator does not light) ‘No Input Signal’ message appears. • • • The remote control does not work. • • • • • • Remove the power cable from the power outlet for 10 seconds, then re-insert the plug into the outlet. Check that the signal line is connected properly. Check that the power of the relevant peripherals is turned on.
BDS4621_EN.qxd 13-12-2004 10:38 Pagina 39 User Manual BDS4621 Problem: Measures: The external speaker has no sound. • Check that the speaker cables are connected appropriately. • Check that the Display is not in ‘Mute’ mode. • Check that the audio signal lines from the peripherals are connected properly. The power indicator flashes. • Check that the input signal line is properly connected. • Check that the screen is not in ‘Power Save’ mode.
BDS4621_EN.qxd 13-12-2004 10:38 Pagina 40 User Manual BDS4621 13. LIMITED WARRANTY (EUR) Two Year Free Labor Two Year Free Parts WHO IS COVERED? You must have proof of the date purchased to receive warranty service. A sales receipt or other document showing the date that you purchased the product is considered proof of purchase. WHAT IS COVERED? Warranty coverage begins the day you buy your product. For two years thereafter, all defective parts will be repaired or replaced and labor is free.
BDS4621_EN.qxd 13-12-2004 10:38 Pagina 41 User Manual BDS4621 • • • normal wear and tear (decreased light output of PDP module) over the product's lifetime. phosphor burn. Do not display static images for prolonged periods, otherwise phosphor burn might appear on part of the panel. limited quantity of cells (fine pixel elements) that do not produce light, or that remain lit after they should have turned off.
BDS4621_EN.qxd 13-12-2004 10:38 Pagina 42 User Manual BDS4621 Repair must be performed by an authorized service center or a factory service center. If you do not live near a factory service center, contact your dealer. If your dealer is an authorized service center, he will arrange repair. REMEMBER ... Please record the model and serial numbers found on the product below. .Also, please fill out and mail your warranty registration card promptly. It will be easier for us to notify you if necessary.
BDS4621_EN.qxd 13-12-2004 10:38 Pagina 43 User Manual BDS4621 14. LIMITED WARRANTY (USA) OneYear Free Labor OneYear Free Parts WHO IS COVERED? You must have proof of the date purchased to receive warranty service.A sales receipt or other document showing the date that you purchased the product is considered proof of purchase. WHAT IS COVERED? Warranty coverage begins the day you buy your product. For one year thereafter, all defective parts will be repaired or replaced and labor is free.
BDS4621_EN.qxd 13-12-2004 10:38 Pagina 44 User Manual BDS4621 • • • normal wear and tear (decreased light output of PDP module) over the product's lifetime. phosphor burn. Do not display static images for prolonged periods, otherwise phosphor burn might appear on part of the panel. limited quantity of cells (fine pixel elements) that do not produce light, or that remain lit after they should have turned off.
BDS4621_EN.qxd 13-12-2004 10:38 Pagina 45 User Manual BDS4621 (In Canada, this warranty is given in lieu of all other warranties. No other warranties are expressed or implied, including any implied warranties of merchantability or fitness for a particular purpose. Philips is not liable under any circumstances for any direct, indirect, special, incidental or consequential damages, howsoever incurred, even if notified of the possibility of such damages.) REMEMBER ...
BDS4621_EN.
BDS4621_EN.
BDS4621_EN.qxd 13-12-2004 10:38 Pagina 48 User Manual BDS4621 1. SERIAL COMMUNICATION PROTOCOL (RS-232) This serial communication protocol can be used to control the BDS4621 plasma display remotely through the serial RS232C port.This information is provided as is. Philips cannot accept any liability for damages or malfunctioning of the display caused by operation through the serial port. The external communication protocol include two parts: • setup connecting, • send command.
BDS4621_EN.qxd 13-12-2004 10:38 Pagina 49 User Manual BDS4621 a). 1st Packet to Target (Philips PDP) structure like as below (Table 1) Packet Header Packet Payload Byte0 Byte1 Byte2 Byte3 Byte4 Byte5 Byte6 Byte7 Byte8 Byte9 Byte10 Byte11 0xBE 0xEF 0x01 0x05 0x00 0xD1 0xFA 0x01 0x02 0x00 0x00 0x00 Magic Number Packet Type Packet size (Low) Packet size (High) CRC (Low) CRC (High) System Info Type Version Number Object ID Level Table 1 b).
BDS4621_EN.qxd 13-12-2004 10:38 Pagina 50 User Manual BDS4621 1.2. Send Command 1.1.2. Introduction Command packets consist of "Header" and "Payload".The Packet Header is consistent for all packets.The Packet Payload type and content varies based on the type of packet sent.The entire packet size is variable, being the sum of the fixed-size Packet Header and variable-sized Packet Payload.
BDS4621_EN.qxd 13-12-2004 10:38 Pagina 51 User Manual BDS4621 Packet Type The Packet Type (ePacketType) is a BYTE in length number that defines the type of data in the packet. The following entries are valid packet typess: Packet Type Name Packet Type Number pt_INVALID 0 RESERVED 1 pt_EVENT 2 pt_OPERATION Description Invalid Packet Type RESERVED Host can send any event defined in Philips PDP software. Host can send any operation defined in Philips PDP software.
BDS4621_EN.qxd 13-12-2004 10:38 Pagina 52 User Manual BDS4621 Operation Packet Type The Operation packet is used by the host system to execute operations (such as Brightness, Contrast, Image Position, etc) in the target system. The Operation packet payload size is 25 bytes.
BDS4621_EN.qxd 13-12-2004 10:38 Pagina 53 User Manual BDS4621 1.1.4. Send Command a. Packet Header Packet Payload Byte0 Byte1 Byte2 Byte3 Byte4 Byte5 Byte6 Byte7 Byte8 Byte9 Byte10 Byte11 Byte12 The structure of Command (EX. input select) send to Target (Philips PDP) like as below (Table 9) 0xBE 0xEF 0x02 0x06 0x00 0x80 0xC7 0xC9 0x00 0x00 0x00 0x00 0x00 Magic Number Packet Type Packet size (Low) Packet size (High) CRC (Low) CRC (High) Virtual Event ID Parameter Table 9 b.
BDS4621_EN.qxd 13-12-2004 10:38 Pagina 54 User Manual BDS4621 1.3. Serial Communication Cable and Parameters For external serial communication from a computer to Philips plasma, Philips recommends manfactures use RS-232 communations over a straight through serial cable a 9 pin female D-sub9 connector. The standard D-sub9 connector on the computer is a male connector, and Philips Plasma, too.The wiring between the computer and Philips plasma is a straight through cable.
BDS4621_EN.qxd 13-12-2004 10:38 Pagina 55 User Manual BDS4621 1.4.
BDS4621_EN.qxd 13-12-2004 10:38 Pagina 56 User Manual BDS4621 1.5. Command List a.
BDS4621_EN.qxd 13-12-2004 10:38 Pagina 57 User Manual BDS4621 command Phase 31 Packet Header (7 bytes) BE EF 03 19 00 43 E8 Sync Adj. (Inc) BE EF 03 19 00 1C 79 Sync Adj. (Dec) BE EF 03 19 00 72 D3 Aspect Ratio (Fill Screen) Aspect Ratio BE EF 03 19 00 40 89 DPMS ON BE EF 03 19 00 3C 53 DPNS OFF BE EF 03 19 00 AC 92 Gamma (2.2) BE EF 03 19 00 04 26 Gamma (2.4) BE EF 03 19 00 F5 66 Gamma (2.6) BE EF 03 19 00 65 A7 Gamma (2.
BDS4621_EN.
BDS4621_EN.
BDS4621_EN.
