Software Upgrade

Philips Consumer Lifestyle
Upgrading the firmware of your player
Note: DO NOT PRESS ANY BUTTON OR INTERRUPT THE MAINS SUPPLY during the
upgrading process, otherwise the player may become defective.
1. Power up the player and insert the USB flash drive into the USB slot.
2. Select “Setting”, navigate to “Advanced Setup” → “Software Download” → “USB” and press
<OK> on the Remote Control.
3. The player will search for the upgrade files. Once the files have been recognized the player will
show a confirmation screen requesting to start the upgrade.
4. Note: The player will indicate “No valid upgrade software found” in the following 2
situations.
- When the software upgrade is not applicable to your player (Check the applicable
models above)
- When the software upgrade files cannot be detected in the USB flash drive. Please
ensure that the UPG folder is located in the root folder of the USB drive and that the
folder and files are named correctly.
5. To proceed with the upgrade, select “Start” and press <OK> on the remote control. You can
also cancel the upgrade by selecting “Cancel” button displayed on TV and press <OK> on the
remote control.
6. Follow the on-screen instruction to proceed with firmware upgrade.
7. During the upgrading process, the screen with display the progress of the firmware upgrade.
8. When the upgrading is completed, the screen will display confirmation of the completion.
9. The BD Player will automatically power off after 5 seconds. At this point, the player is ready
with the new firmware loaded.
Confirm successful upgrade
1. Turn on the player, repeat Step 1 to verify if the new firmware is correctly upgraded.
2. If you do not see the latest firmware is being upgraded, repeat Step 4 and Step 5
Firmware Upgrade History
Version: 1.09
Improve playback on the following Blu-ray disc titles :
• ‘Die Chroniken von Narnia - Der König von Narnia (2-Disc Edition)’
• ‘Triff die Robinsons’.
Step 4
Step 5