Software Upgrade
Philips Consumer Lifestyle
1. Power up the BD player and insert the USB flash drive into the USB slot.
2. Select “Setting”, navigate to “Advanced Setup” → “Software Download” → “USB” and press
<OK> on the Remote Control.
3. The BD player will search for the upgrade files. Once the files have been recognized the player
will show a confirmation screen requesting to start the upgrade.
4. Note: The BD player will indicate “No valid upgrade software found” in the following 2
situations.
- When the software upgrade is not meant for your player (Check the applicable models
above)
- When the software upgrade files cannot be detected in the USB flash drive. Please
ensure that the UPG folder is located in the root folder of the USB drive and that the
folder and files are named correctly.
5. To proceed with the upgrade, select “Start” and press <OK> on the remote control. You can
cancel the upgrade at this point by selecting “Cancel” button displayed on TV and press <OK>
on the remote control.
6. Follow the on-screen instruction to proceed with firmware upgrade.
7. During the upgrading process, the screen with display the progress of the firmware upgrade.
8. When the upgrading is completed, the screen will display confirmation of the completion.
9. The BD Player will automatically power off after 5 seconds. Please restart the set. At this point,
the set is ready with the new firmware loaded.
Confirm successful upgrade
1. After turning on the set, repeat Step 1 to verify if the new firmware is correctly upgraded.
2. If you do not see the latest firmware is being upgraded, repeat Step 4 and Step 5.
Firmware Upgrade History
This upgrade software solves the following:
Version: 1026.1
Improved playback of certain Blu-Ray (Avatar) and DVD discs
Resolved issue whereby the default language chosen does not work on certain DVD discs
Version: 1006.5
Resolved playback of certain Blu-Ray and DVD discs
Improved playback of 24fps (frame per second) material in Blu-Ray Disc
HDMI Audio output
o Select „Bitstream‟ under Audio Setup/ HDMI Audio:
1. For best original performance Blu-ray audio experience,
recommended when the player is connected to multi channels
surround system via a HDMI HD audio reviver/ amplifier.
2. However to enjoy audio from BonusView (also known as Picture-in-
Picture), please select HDMI Audio to „Auto‟.
Version: 949.1
Resolved playback issue with the following Blu-ray Disc titles:
o “Terminator Salvation”,
o “Babel”
Resolved playback issue on some DVD titles
Version: 934.2
1. Added “16:9” selection under TV Display Setting in Setup.
Step 5