BDP9000_QSG_EN.
BDP9000_QSG_EN.qxd 9/8/06 12:23 PM Pagina 4 b. Remote control RC4380 NOTE: Refer to the user manual for: • Important safety instructions. • Other possible connections (for example, digital audio).
BDP9000_QSG_EN.qxd 9/8/06 12:23 PM Pagina 5 1 Prepare A Prepare the remote control 1 Open the battery compartment of the remote control. 2 Insert the batteries correctly. 3 Close the battery compartment. 2 Connect For more information about the ports on your TV, refer to the user manual of your TV. A Connect the TV Option 1 - Best high-definition quality - For TVs with an HDMI port: 1. Take the supplied HDMI cable (g). 2. Plug one end of the HDMI cable into the HDMI OUT port. 3.
BDP9000_QSG_EN.qxd 9/8/06 12:23 PM Pagina 6 4. Take the supplied audio cable (i). 5. Plug one end of the audio cable into the AUDIO-L and AUDIO-R ports. 6. Plug the other end of the audio cable into the TV. Option 3 - Good quality - For TVs with component video ports: 1. Take the supplied component video cable (h). 2. Plug one end of the component video cable into the Y, Pb and Pr ports. 3. Plug the other end of the component video cable into the TV. HDTV 4. Take the supplied audio cable (i). 5.
BDP9000_QSG_EN.qxd 9/8/06 12:23 PM Pagina 7 3 Set up 1. Turn the TV on. 2. Set the TV to the correct external input. 3. Press the STANDBY-ON button. > The STANDBY-ON light comes on as blue. 4. Open the user access panel. 5. If the TV connection is HDMI (refer to 1A), press the VIDEO OUTPUT SELECTION button until the HDMI light comes on. > The video signal of the Blu-ray Disc player shows. 6.
BDP9000_QSG_EN.qxd 9/8/06 12:23 PM Pagina 8 4 Enjoy A Load a disc 1. Press the OPEN/CLOSE button. > The disc tray opens. 2. Put the disc in the disc tray with the label on the top. 3. Press the OPEN/CLOSE button again. > The disc tray closes. B Control a disc You can now enjoy your Blu-ray Disc player. Control the disc with: • The supplied universal remote control. • The buttons on the front of the Blu-ray Disc player.
BDP9000_QSG_EN.qxd 9/8/06 12:23 PM Pagina 1 Troubleshooting Problem Tip Cannot play a disc • Put the disc in the disc tray with the label on the top. • Make sure that the Blu-ray Disc player supports the disc type. • Make sure that the Blu-ray Disc player supports the region code of the DVD or BD. No video signal on the connected TV • Turn the TV on. • Set the TV to the correct external input. • Use the VIDEO OUTPUT SELECTION button to set up the video output. Refer to 3. Set up.
BDP9000_QSG_EN.qxd 9/8/06 12:23 PM Pagina 2 Need help? User manuals Refer to the supplied user manuals Online help www.usasupport.philips.com Helpline English French Spanish 1-888-PHILIPS (1-888-744-5477) 1-800-661-6162 1-888-PHILIPS (1-888-744-5477) Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. 2006 © Koninklijke Philips Electronics N.V. All rights reserved. www.philips.