Register your product and get support at www.philips.
Important notes for users in U.K. Mains plug This apparatus is fitted with an approved moulded plug. Should it become necessary to replace the main fuse, this must be replaced with a fuse of same value as indicated on the plug (example 10A). 1. Remove fuse cover and fuse. 2. The replacement fuse must comply with BS1362 and have the A.S.T.A. approval mark. If the fuse is lost, contact your dealer in order to verify the correct type. 3. Refit the fuse cover.
1 Important Safety and important notice Trademark notice 4 4 5 2 Your product Feature highlights Playable media Product overview 6 6 6 6 3 Connect Connect video/audio cables Route audio to other devices Connect a USB device Connect a network Connect power 8 8 9 10 10 10 4 Get started Prepare the remote control Find the TV input Use the Home menu Navigate the menu Select a menu display language Set up a network Use Philips EasyLink 10 10 11 11 11 11 11 13 5 Play Play a disc Play from a USB devic
1 Important Safety and important notice Warning Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health. Copyright notice • Risk of overheating! Never install the product in a • • • • • • confined space. Always leave a space of at least 4 inches around the product for ventilation. Ensure curtains or other objects never cover the ventilation slots on the product.
English Trademark notice BONUSVIEW™ ‘Blu-ray Disc’ and ‘Blu-ray Disc’ logo are trademarks. ‘BD LIVE’ and ‘BONUSVIEW’ are trademarks of Blu-ray Disc Association. HDMI, and HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC. ‘AVCHD’ and ‘AVCHD’ logo are trademarks of Matsushita Electric Industrial Co., Ltd and Sony Corporation.
2 Your product Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers (e.g. product software upgrade), register your product at www.philips.com/welcome. If you contact Philips, you will be asked for the model and serial number of your product. The model number and serial number are on the back of your product. Write the numbers here: Model No. __________________________ Serial No.
a • Turn on this product or switch to standby mode. • When EasyLink is enabled, press and hold for at least three seconds to turn all connected HDMI CEC compliant devices to standby. b BONUSVIEW • Turn on or off the secondary video in a small screen window during play (applicable only to a Blu-ray disc that supports the BONUSVIEW or PictureIn-Picture feature). c TOP MENU • BD: Display the top menu. • DVD: Display the title menu. d • Access the home menu of this product.
w Color buttons • BD: Select tasks or options. x HDMI • Select the video resolution of HDMI output. y REPEAT • Select repeat play or shuffle play. 1 Connect an HDMI cable (not supplied) to: • the HDMI jack on this product. • the HDMI input jack on the TV. Tip • If the TV has a DVI connector only, connect via an HDMI/ DVI adaptor. Connect an audio cable for sound output.
Tip English Option 3: Connect to the composite video jack • The HDMI connection provides best audio quality. AUDIO IN Connect to a multi-channel AV receiver/ amplifier VIDEO IN 1 2 Connect a composite video cable to: • the VIDEO jack on this product. • the VIDEO input jack on the TV. Connect the audio cables to: • the LINE OUT/AUDIO -L/R jacks on this product. • the AUDIO input jacks on the TV. Tip • The video input jack on the TV might be labeled as A/V IN, VIDEO IN, COMPOSITE or BASEBAND.
1 Connect a coaxial cable (not supplied) to: • the COAXIAL jack on this product. • the COAXIAL/DIGITAL input jack on the device. Connect to the optical jack Connect a network With a wired or wireless connection (see “Get started” > “Set up a network”), you can connect this product to: • the Internet (for software update/BD Live/Net TV service). • or a home network (to access media files from a DLNA media server, e.g. PC).
Push and slide back the battery compartment (see “3” in the illustration). Button Action Move up or down. Move left or right. OK Note Confirm a selection. Enter numbers/letters/text. Select a menu display language • If you are not going to use the remote control for a long time, remove the batteries. • Do not mix batteries (old and new or carbon and Note alkaline, etc.). • Batteries contain chemical substances, so they should be disposed of properly.
• and the media server software is configured to enable media sharing (See the “Help” documentation from the media server software). Set up a wired network Note 1 2 3 Connect a Philips Wi-Fi USB adapter (named WUB1110, separately sold) to the Wi-Fi jack on the back of this product. To access media files from you computer, connect the computer to the router. Turn on this product, the computer and the router. • Ensure that the network cables are properly connected.
Follow the on-screen instructions to complete the network installation. » After the network installation completes, you can access the services: browse Net TV, browse PC, BD-Live, software updates. 5 Play English 6 Play a disc Caution Tip • Do not place any objects other than discs into the disc compartment. • You can check the status of the wired or wireless connection of this product (see “Adjust settings” > “Network Setup” >[View Network Settings] or [View Wireless Settings]).
3 Select a file to play, and press OK. » Play starts (see “Play video”, “Play photo”, Play music” for details). • To stop play, press or remove the USB device. Button Action REPEAT Directly select/turn off repeat or shuffle mode. • Repeat options may vary from the disc type. • For VCDs, repeat play is only possible when the PBC mode is turned off. Access the above mentioned actions or more options. Display the current status or disc information.
Select a title/chapter 1 During play, press 2 3 • Applicable only to discs that contain multi-angle scenes. Select [Titles] or [Chapters] in the menu, and press OK. Select the title or chapter number, and press OK. Skip play to a specific time 1 During play, press OPTIONS. » The play options menu is displayed. 2 3 Select [Time Search] in the menu, and press OK. Press the Navigation buttons ( ) to change the time to skip to, and press OK. Select [Zoom] in the menu, and press OK.
When the disc supporting BD-Live is played, this product or disc’s ID can be sent to the content provider via the internet. Services and functions to be provided vary from disc to disc. Play DivX® video DivX video is a digital media format that retains high quality despite a high rate of compression. 1 Insert a disc or USB device that contains the DivX videos. 2 Press , select [Play Disc] or [Browse USB], and press OK. » A contents menu is displayed. 3 4 5 Select a video folder, and press OK.
Browse PC Control a track 1 Play a track. 2 Use the remote control to control the play. With a home network, you can play videos /music / photos which are streamed from a DLNA media server (e.g. PC) to your TV through this DLNA certified product. Button Action Note Pause play. Start or resume play. • To browse a PC, ensure that a DLNA media server software (e.g. Windows Media Player 11) is installed on the PC. Stop play. Skip to a previous/next track. / Select an item to play.
Note • Because NET TV is an online system, it can be modified over time to better serve its purpose. • Some Net TV services can be added, changed or stopped after some time. • For Net TV, You cannot download and save files nor install plug-ins. 1 Set up a network (see “Get started” > “Set up a network”). • Make sure that you have completed the network installation. Press to display the home menu. Select [Browse NetTV], and press OK.
4 5 • Only services on the Net TV pages can be locked. Advertisement and open Internet websites can not be locked. • Services are locked per country. Categories are locked for all countries. • When you have registered Net TV and you switch Select an option, then press OK. Select a setting, then press OK. • To return to the previous menu, press BACK. • To exit the menu, press .
[HDMI Deep Color] This feature is available only when the display device is connected by an HDMI cable, and when it supports deep color feature. • [Auto] - Enjoy vivid images in over a billion colors on Deep Color enabled TV. • [On] - Enjoy vivid images in over a billion colors on Deep Color enabled TV. Output 12 bit color that reduces the posterization effect. • [Off] - Output standard 8 bit color.
Tip EasyLink setup 1 2 3 Press . Select [Setup], and press OK. Select [EasyLink Setup], and press Video Setup Audio Setup . EasyLink On One Touch Play On One Touch Standby On Network Setup • The test tone is emitted from the speaker while adjusting • [Network Installation] Install the network connection. [View Network Settings] Display the information for the current network status. [View Wireless Settings] Display the information for the current Wi-Fi status.
[One Touch Standby] When you press and hold (standby), all the connected HDMI CEC devices (if the device supports one-touch standby) switch to standby mode simultaneously. • [On] - Turn on one-touch standby feature. • [Off] - Disable one-touch standby feature. Note • You must turn on the HDMI CEC operations on the TV/ • devices before you can enjoy the EasyLink controls. See the TV/devices manual for details. Philips does not guarantee 100% interoperability with all HDMI CEC compliant devices.
Advanced setup 1 2 3 Press . Select [Setup], and press OK. Select [Advanced Setup], and press Note • When you clear the local storage, previous download of BD-Live bonus contents is no longer available. [DivX® VOD Code] Display the DivX® registration code or de-registration code. Tip • Use this product’s DivX registration code when you rent or purchase video from www.divx.com/vod.
» Once software update is complete, this product automatically turns off to standby. Update software via USB 1 Go to www.philips.com/support to check if 2 3 4 5 the latest software version is available for this product. Download the software into a USB flash drive: a Un-zip the download, and make sure that the un-zipped folder is named “UPG”. b Put the “UPG” folder in the root directory. Insert the USB flash drive to the (USB) jack on the front panel of this product.
Warning • Risk of electric shock. Never remove the casing of the product. To keep the warranty valid, never try to repair the product yourself. If you have problems using this product, check the following points before you request service. If you still have a problem, register your product and get support at www.philips.com/welcome. Main unit No reaction to the remote control. • Connect this product to the power outlet.
EasyLink feature does not work. • Ensure that this product is connected to the Philips brand EasyLink TV and the[EasyLink]in the menu is set to [On]. Unable to access BD-Live feature. • Check the network connection or ensure that the network has been set up. • Clear local storage, internal memory (if any) or USB. • Ensure that the BD disc supports BD Live feature. Network Wireless network is not found or distorted.
DTS Digital Theatre Systems. A surround sound system for providing 5.1 channels of discrete digital audio in consumer electronics products and software content. It is not developed by Dolby Digital. H HDCP High-bandwidth Digital Content Protection. This is a specification that provides a secure transmission of digital contents between different devices (to prevent unauthorized copyright.
English NOTICE SOFTWARE END USER LICENSE AGREEMENT THIS SOFTWARE END USER LICENSE AGREEMENT (“THIS AGREEMENT”) IS A LEGAL AND BINDING AGREEMENT BETWEEN YOU (EITHER AN INDIVIDUAL OR ENTITY) AND PHILIPS CONSUMER LIFESTYLE B.V. A DUTCH LIMITED LIABILITY COMPANY, WITH ITS PRINCIPAL OFFICE AT HIGH TECH CAMPUS 37, 5656 AE EINDHOVEN, THE NETHERLANDS AND ITS SUBSIDIARY COMPANIES (INDIVIDUALLY AND COLLECTIVELY “PHILIPS”).
the upgrade, you will not be able to access Secure Content that requires the WM-DRM Upgrade; however, you will still be able to access unprotected content and Secure Content that does not require the upgrade. WM-DRM features that access the Internet, such as acquiring new licenses and/or performing a required WM-DRM Upgrade, can be switched off. When these features are switched off, you will still be able to play Secure Content if you have a valid license for such content already stored on your Device.
11. LIMITATION OF LIABILITY. UNDER NO CIRCUMSTANCES WILL PHILIPS OR ITS LICENSORS BE LIABLE FOR ANY CONSEQUENTIAL, SPECIAL, INDIRECT, INCIDENTAL OR PUNITIVE DAMAGES WHATSOEVER, INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS OR REVENUES, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, LOSS OF DATA, LOSS OF USE OR OTHER PECUNIARY LOSS, EVEN IF PHILIPS OR ITS LICENSORS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
License Texts and Acknowledgements for any open source software used in this Philips product Instructions to obtain source code for this software can be found in the user manual. 1. U-boot # # (C) Copyright 2000 - 2008 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this # project.
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it. For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code.
3. 4. 5. 6. 7. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program. In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 8. If the distribution and/or use of the Program is restricted in cer tain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded.
If the program is interactive, make it output a short notice like this when it starts in an interactive mode: Gnomovision version 69, Copyright (C) 19yy name of author Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w’. This is free software, and you are welcome to redistribute it under certain conditions; type `show c’ for details. The hypothetical commands `show w’ and `show c’ should show the appropriate parts of the General Public License.
To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the library is modified by someone else and passed on, the recipients should know that what they have is not the original version, so that the original author’s reputation will not be affected by problems that might be introduced by others. Finally, software patents pose a constant threat to the existence of any free program.
1. 2. 3. 4. 5. You may copy and distribute verbatim copies of the Library’s complete source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and distribute a copy of this License along with the Library.
6. 7. 8 Section 6 states terms for distribution of such executables. When a “work that uses the Library” uses material from a header file that is part of the Library, the object code for the work may be a derivative work of the Library even though the source code is not. Whether this is true is especially significant if the work can be linked without the Library, or if the work is itself a library. The threshold for this to be true is not precisely defined by law.
8. 9. 10. 11. 12. 13. 14. 15. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance.
YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 16.
6. WPA Supplicant Copyright (c) 2003-2009, Jouni Malinen and contributors All Rights Reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2.
the publication and/or website. Unicode may make improvements and/or changes in the product(s) and/or program(s) described in this publication and/or website at any time. If this file has been purchased on magnetic or optical media from Unicode, Inc. the sole and exclusive remedy for any claim will be exchange of the defective media within ninety (90) days of original purchase. EXCEPT AS PROVIDED IN SECTION C.
copyright notice(s) and this permission notice appear in associated documentation, and (c) there is clear notice in each modified Data File or in the Software as well as in the documentation associated with the Data File(s) or Software that the data or software has been modified.
* nor may “OpenSSL” appear in their names without prior written * permission of the OpenSSL Project. * * 6. Redistributions of any form whatsoever must retain the following * acknowledgment: * “This product includes software developed by the OpenSSL Project * for use in the OpenSSL Toolkit (http://www.openssl.
* “This product includes cryptographic software written by * Eric Young (eay@cryptsoft.com)” * The word ‘cryptographic’ can be left out if the rouines from the library * being used are not cryptographic related :-). * 4. If you include any Windows specific code (or a derivative thereof ) from * the apps directory (application code) you must include an acknowledgement: * “This product includes software written by Tim Hudson (tjh@cryptsoft.
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software without prior written authorization of the copyright holder. 11.
13. Expat Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd and Clark Cooper Copyright (c) 2001, 2002, 2003, 2004, 2005, 2006 Expat maintainers.
SPECIAL, EXEMPL ARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA , OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. If these license terms cause you a real problem, contact the author. */ 16.
Guy Eric Schalnat Paul Schmidt Tim Wegner The PNG Reference Library is supplied “AS IS”. The Contributing Authors and Group 42, Inc. disclaim all warranties, expressed or implied, including, without limitation, the warranties of merchantability and of fitness for any purpose. The Contributing Authors and Group 42, Inc.
© 2010 Koninklijke Philips Electronics N.V. All rights reserved. BDP7500 MK II_05_UM_V2.
