Software Upgrade

Updating software
There are three ways to update software in this unit.
1. You can download the software and load it to a USB drive.
2. You can download the software and burn it to a CD.
3. You can update from the internet.
Using a USB drive or CD
To use a USB drive or CD, download the software, the unzip the file to extract the *.bin file.
Loading the USB drive
1. The USB drive you use for the upgrade needs to meet the following criteria:
a. USB drive size should be 256 MB or larger, but no larger than 4GB.
b. USB drive should be clean formatted for FAT32 before you start the process.
c. Drives with U3 software are not supported. The U3 uninstall tool can be found
here. http://u3.sandisk.com/launchpadremoval.htm
2. Most modern computers (operating systems) usually have Zip File extraction tools
built-in, but in case yours does not, you can download and install 7-Zip or any other
extraction tool to extract the Firmware Upgrade Package. 7-Zip can be found here:
http://7-zip.org/download.html
3. Copy the *.bin file to the root director of the USB drive. An example of the root directory
would be e:\.
Creating a CD
To create a CD, you will need a CD burner drive on your computer. Load the *.bin file to the
root directory of the CD. Finalizing the CD is required for the player to recognize the disc.
The detailed instructions for loading are on the following page.