Software Upgrade

Philips Consumer Lifestyle
Upgrading the firmware of your BD player
Note: Do not press any buttons or interrupt the household power supply during the upgrading
process, or the player may become defective.
1. Power up the BD player and eject the disc tray.
2. Place the upgrade disc on the disc tray and close the tray.
3. If the disc is recognized as an upgrade disc, the local display of player will show "UPDATE." The
TV screen will show a dialog box titled "Software Upgrade"
4. Note: The BD player will indicate "Unknown Disc" in the following 2 situations:
- If the software upgrade is not intended for your player (Check the applicable models above)
- Problem with writing CD-R/CD-RW. Try again with a different CD-R/CD-RW if possible.
5. To proceed with the upgrade, select "Yes" and press <OK> on the remote control. You can
cancel the upgrade at this point by selecting the "No" button on the TV and pressing <OK> on
the remote control.
6. If you proceed with the upgrade, the VFD will display "CHECKSW" and the TV will display
"Loading Software" in the dialog box.
7. Follow the on-screen instruction to proceed with the software upgrade and loader upgrade.
8. During the upgrading process, the VFD will display the completion percentage of the firmware
upgrade.
9. When the upgrade is completed, the local display of the player will show "FINISH."
10. Power off and on to restart the set. At this point, the set is ready with the new firmware.
Confirm successful upgrade
1. After turning on the set, repeat step 1 to verify that the firmware has been correctly
2. If the firmware version displayed is not the latest version, repeat Step 4 and Step 5
Firmware upgrade history
This software upgrade solves the following:
Firmware Version V1.004
 DivX: Subtitle display not centered
 Top right icon turns black at HOME menu for "LETTERS FROM IWO JIMA" (BD) disc
 During "RESIDENT EVIL" (BD) playback with PiP ON, if user pushes RC_Subtitle,
"Secondary Not Available" OSD may be displayed on TV.
 During playback of "THE GRUDGE" DVD, if user selects TimeSearch "0:59:00", playback
point goes to "0:51:00".
 Connect a player to 2 TVs. One is HDMI 1080i and one is CVBS. Play back DVD with 4:3
aspect. Push RC_ZOOM. ZOOM OSD is displayed in the bottom right corner. It may be
partially cut off on the display.
Firmware Version V1.111
 Proper display of text subtitles according to the selected language.
Step 4
Step 5