Software Upgrade
Upgrading the firmware of your BD player
Note: Do not press any buttons or interrupt the mains supply during the upgrading process,
otherwise the player may become defective.
1. Power up the BD player and eject the disc tray.
2. Place the upgrade disc on the disc tray and close the tray.
3. If the disc is recognized as an upgrade disc, the local display of player will show "UPDATE". The
TV screen will show a dialog box titled “Software Upgrade”
4. Note: The BD player will indicate “Unknown Disc” in the following 2 situations.
- When the software upgrade is not meant for your player (Check the applicable models
above)
- Problem with writing of CDR/CDRW. Try again with a different CDR/CDRW if
possible.
5. To proceed with the upgrade, select “Yes” and press <OK> on the remote control. You can
cancel the upgrade at this point by selecting “No” button on TV and press <OK> on the remote
control.
6. If you proceed with the upgrade, the VFD will display “CHECKSW” and the TV will display
“Loading Software” in the dialog box.
7. Follow the on-screen instruction to proceed software upgrade and loader upgrade.
8. During the upgrading process, the VFD with display the completion percentage of the firmware
upgrade.
9. When the upgrading is completed, the local display of the player will show “FINISH”.
10. Power off and on to restart the set. At this point, the set is ready with new firmware.
Confirm successful upgrade
1. After turning on the set, repeat step 1 to verify if the new firmware is correctly upgraded.
2. If you do not see the latest firmware is being upgraded, repeat Step 4 and Step 5.
Firmware Upgrade History
This upgrade software solves the following:
Firmware Version V1.105
Unable to skip to previous chapter during BD Disc playback
No audio output after changing source to TV tuner and back to HDMI source intermittently.
Firmware Version V1.112
Proper display of text subtitles according to the selected language.
Firmware Version V1.113
Resolved BDMV PiP video does not maintain the proper aspect ratio during playback.
Firmware Version V1.114
Playback improvement on some BD titles
Step 4
Step 5