Software Upgrade

Firmware Upgrade

We have developed a firmware upgrade to improve your product.

This upgrade is applicable for the following models:

BDP7200/12

BDP7200/05

This firmware version improves: Click here for more details

Note: Before you proceed to upgrade, please be reminded that you need to do configuration again

each time after firmware upgrade!

Upgrade Procedure

Check your current version

First check your current firmware version to see if you need to upgrade:

1. Turn on the set and it will be at the HOME menu.

2. Select “Product Info” and press <OK> on the Remote Control.

3. The firmware version will be displayed on the TV screen.

4. If your existing firmware version is earlier than this version, [1.114], please proceed to step 2

Otherwise, you do not need to upgrade.

Download firmware upgrade

Click the link to download the new firmware package on your computer. The package is compressed

into a single ZIP archive.

Burning the firmware on CD-R / CD-RW

Note: You will need one blank CD-R or CD-RW disc for this step.

1. Extract the firmware upgrade file from the ZIP archive

(Do not rename the filenames)

Burn the extracted file (NOT THE ZIP FILE) onto a blank

CD-R or CD-RW disc, using the following settings:

- File System: ISO 9660 + Joliet

- Mode: 2/XA

- Character set: ISO 9660 (ISO normal CD-ROM)

- No multi session

- Write Speed: Low

Note: ZIP file will not be readable on the set

2. Finalize the discs. (The application may do this automatically.)

Step 1

Step 2

Step 3

BDP7200 Firmware Upgrade

PAGE 1
BDP7200 Firmware Upgrade Firmware Upgrade We have developed a firmware upgrade to improve your product. This upgrade is applicable for the following models: BDP7200/12 BDP7200/05 This firmware version improves: Click here for more details Note: Before you proceed to upgrade, please be reminded that you need to do configuration again each time after firmware upgrade! Upgrade Procedure Step 1 Check your current version First check your current firmware version to see if you need to upgrade: 1.
PAGE 2
Step 4 Upgrading the firmware of your BD player Note: Do not press any buttons or interrupt the mains supply during the upgrading process, otherwise the player may become defective. 1. Power up the BD player and eject the disc tray. 2. Place the upgrade disc on the disc tray and close the tray. 3. If the disc is recognized as an upgrade disc, the local display of player will show "UPDATE". The TV screen will show a dialog box titled “Software Upgrade” 4.